[prev in list] [next in list] [prev in thread] [next in thread]
List: nanog
Subject: Re: ATM/IP video
From: Robert Blayzor <rblayzor () inoc ! net>
Date: 2004-07-29 12:29:22
Message-ID: 4108EDA2.9000907 () inoc ! net
[Download RAW message or body]
Tracey Webb wrote:
> I am attempting to bridge multiple ATM vc's on a single port OC12c in my
> Cisco 12008. The vc's are coming from VTC video equipment. Each vc is a
> different channel. I need to terminate it and pass over the IP's to my
> gigE port. Any suggestions.
Maybe this works...
interface ATM6/0
no ip address
!
interface ATM6/0.1 multipoint
range Video pvc 1/100 1/199
bridge-group 1
!
interface GigabitEthernet2/8
...
bridge-group 1
--
Robert Blayzor, BOFH
INOC, LLC
rblayzor@inoc.net
PGP: http://www.inoc.net/~dev/
Key fingerprint = 1E02 DABE F989 BC03 3DF5 0E93 8D02 9D0B CB1A A7B0
Life would be much easier if I had the source code.
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic