[prev in list] [next in list] [prev in thread] [next in thread]
List: mythtv-users
Subject: Re: [mythtv-users] O.T. myth-tv + gentoo + wireless LAN info
From: sarvinc () fastmail ! fm
Date: 2005-11-28 14:57:32
Message-ID: 200511281457.32197.sarvinc () fastmail ! fm
[Download RAW message or body]
On Monday 28 November 2005 10:47 pm, Kevin Kuphal wrote:
> Rodney D. Myers wrote:
> >I've purchased at myth-tv box from magicitx.com, and not in the
> >position to run a LAN cable from the living room to the computer room
> >[aka spare bedroom].
> >
> >From what I gather from the reading, it runs gentoo. What pci and/or
> >USB wifi network card(s) will work in, as a drop in card?
>
> Buy a wireless bridge, save yourself the trouble of getting Linux +
> wireless to work
>
> http://www.netgear.com/products/details/WGE101.php
Agreed, if your wired network card works and you don't want to touch anything
just use a bridge. Installing a wireless card isn't tough. There are plenty
of wireless network cards that will work. Wireless is probably not enabled in
the kernel so, depending on what is already compiled in, you probably will
need to recompile your kernel. You'll need to edit the file /etc/conf.d/net .
The next step depends on what card you decide to use. I'm using a Gentoo box
with a Netgear WG311T 802.11g card, madwifi-driver will need to be installed
with "emerge madwifi-driver" Some 802.11b card drivers are already included
in the kernel. Depending on your network and type of security used some other
tools may need to be installed. I really don't want to scare you way from
wireless cards. The thing I cannot stress enough is to make sure you buy a
card that is supported.
_______________________________________________
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic