[prev in list] [next in list] [prev in thread] [next in thread]
List: mumps-l
Subject: Re: Moving M to Windows
From: Lyle Schofield <lyle () SENTIENTSYSTEMS ! COM>
Date: 1997-09-25 17:49:11
[Download RAW message or body]
Jim self <jaself@ucdavis.edu> wrote in article
<3429C273.5A3DD83@ucdavis.edu>...
>
>
> William Davis MD wrote:
>
> > Any ideas on how to do this with less expense. COSTAR is all character
> > based and I don't anticipate trying to change it. It works too well
and
> > too quickly to slow it down with Windows and Mice.
>
> Even though you say it works quickly, I would guess that it is running on
an old 486
> or less so that you can probably speed it up dramatically by moving up to
a modest
> new pentium at under $2000 - less hardware than you are likely thinking
of putting
> on each desktop.
>
Watch out with the Arnet boards. Some of the older models of Arnet boards
(mostly
the ones with the two ribbon cables) do not work with Pentium motherboards
because
of a timing problems with Pentium speeds over 66 MHz.
--
====================================
W. L. Schofield lyle@sentientsystems.com
Sentient Systems, Inc.
Kensington, MD USA 20895
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic