[prev in list] [next in list] [prev in thread] [next in thread]
List: ms-smartcardddk
Subject: Disabler Test
From: Kuan <kufo () MS ! CHTTL ! COM ! TW>
Date: 2000-11-06 5:02:13
[Download RAW message or body]
Hi All:
I am writing a Serial PC/SC driver (reference Bull TLP3 VxD driver in
Win98 DDK) and use the SCARD99 V3.10 to test my driver.
In the disabler test,the test enable and disable the driver
repeatedly,but I failed the test due to the following error messages.
Disabler Test 2000/10/28 PM 03:54:25
Disabler Test: Info retrieved from win98.log by TSHELL
Pooltag Disabled
Disabler (External)
Version: 1.32 External
Disabler.EXE last created on Nov 15 1999
command line :C:\SCARD99\disabler.exe win98.ini
Testing class :SMARTCARDREADER
***********************************
Beginning test of: Bull SmarTLP3 Smart Card Reader
class : SMARTCARDREADER
Children found before testing
None
#1, #2, #3, #4, #5, #6, #7, ERROR: Device found which is removeable,
testable, and of the correct class
but cannot test because device (Bull SmarTLP3 Smart Card Reader) has a
problem (000A)
ERROR: Bull SmarTLP3 Smart Card Reader reports a problem after stop/start,
Devnode Status 000A
ERROR: "Bull SmarTLP3 Smart Card Reader" status code has been changed, is
now 0x8006E62, was 0x8006A4A
difference is 0x00000428
Bit "DN_STARTED : Is currently configured" : is now Set
ERROR: Devnode has not recovered after stop/start
#8, ERROR: Device found which is removeable, testable, and of the correct
class
but cannot test because device (Bull SmarTLP3 Smart Card Reader) has a
problem (000A)
ERROR: Bull SmarTLP3 Smart Card Reader reports a problem after stop/start,
Devnode Status 000A
ERROR: "Bull SmarTLP3 Smart Card Reader" status code has been changed, is
now 0x8006E62, was 0x8006A4A
difference is 0x00000428
Bit "DN_STARTED : Is currently configured" : is now Set
ERROR: Devnode has not recovered after stop/start
#9, ERROR: Device found which is removeable, testable, and of the correct
class
but cannot test because device (Bull SmarTLP3 Smart Card Reader) has a
problem (000A)
ERROR: Bull SmarTLP3 Smart Card Reader reports a problem after stop/start,
Devnode Status 000A
ERROR: "Bull SmarTLP3 Smart Card Reader" status code has been changed, is
now 0x8006E62, was 0x8006A4A
difference is 0x00000428
Bit "DN_STARTED : Is currently configured" : is now Set
ERROR: Devnode has not recovered after stop/start
#10, ERROR: Device found which is removeable, testable, and of the correct
class
but cannot test because device (Bull SmarTLP3 Smart Card Reader) has a
problem (000A)
ERROR: Bull SmarTLP3 Smart Card Reader reports a problem after stop/start,
Devnode Status 000A
ERROR: "Bull SmarTLP3 Smart Card Reader" status code has been changed, is
now 0x8006E62, was 0x8006A4A
difference is 0x00000428
Bit "DN_STARTED : Is currently configured" : is now Set
ERROR: Devnode has not recovered after stop/start
Does any one know how to solve this problem ? Please give me a hand.
Thanks.
Kuan
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic