[prev in list] [next in list] [prev in thread] [next in thread]
List: ms-ospf
Subject: Re: Active Backbone Area?
From: "John T. Moy" <jmoy () CASC ! COM>
Date: 1998-11-04 21:15:16
[Download RAW message or body]
Bill-
It means interfaces that are up (sending hellos).
They do not necessarily have to have adjacent neighbors.
John
Wollman, William wrote:
> In Section 16.2 of RFC 2328 it states
> "The inter-area routes are calculated by examining summary-LSAs.
> If the router has active attachments to multiple areas, only
> backbone summary-LSAs are examined. "
>
> What is the desired definition of the words "active attachments"? Does that
> mean fully
> adjacent with at least one neighbor or just sending hellos on the interface
> looking
> for neighbors etc.? I imagine it should mean fully adjacent. Some
> questions arose on this
> sentence in discussions here.
>
> Thanks for any thoughts,
> Bill Wollman
> =======================
> William Wollman
> Lead Network Engineer
> The MITRE Corporation
> 145 Wyckoff Road
> Eatontown, NJ 07724
> =======================
> Phone: (732) 389-6722
> Fax: (732) 544-8863
> Email: wwollman@mitre.org
> =======================
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic