[prev in list] [next in list] [prev in thread] [next in thread]
List: mrtg
Subject: Re: [mrtg] MRTG with RRD tool using 14all.cgi script
From: Daniel McDonald <dan.mcdonald () austinenergy ! com>
Date: 2011-09-19 20:58:06
Message-ID: CA9D170E.3D317%dan.mcdonald () austinenergy ! com
[Download RAW message or body]
On 9/18/11 7:45 PM, "John Young" <dextux88@gmail.com> wrote:
> Is that all I need to do? I see the 2 minutes intervals on the graphs,
> however the data still looks like it's updating every five minutes. Maybe
> there is not enough bandwidth for the snmp polling? I only need the snmpd
> installed before mrtg correct?
The front-end needs to know that a higher resolution than 5-minutes is
available to display. I know that this is built in to routers2.cgi (the "6
hour view") but I haven't played with 14all in a long time to know if it
includes a six-hour view that can take advantage of a higher resolution....
--
Daniel J McDonald, CCIE # 2495, CISSP # 78281
_______________________________________________
mrtg mailing list
mrtg@lists.oetiker.ch
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic