[prev in list] [next in list] [prev in thread] [next in thread]
List: mrtg
Subject: Re: [mrtg] router CPU Utilization with MRTG 2.15.2
From: Steve Shipway <s.shipway () auckland ! ac ! nz>
Date: 2009-02-13 3:45:05
Message-ID: 6B587E8C999646469B54486AF21958460B43BFA38C () UXCHANGE7-1 ! UoA ! auckland ! ac ! nz
[Download RAW message or body]
> I'm a bit confused as to how to get CPU utilization graphs. I want to
> have the CPU utilization on the router.html file which I have created
> with indexmaker.
> My router.cfg file is graphing all the vlans fine.
>
> If I want to monitor CPU do I need to re-run the cfgmaker and
> indexmaker again on the router.cfg or do I need to add something to
> this file?
The easiest way to achieve this is to download the Cisco Host Template from
the cfgmaker templates library at http://www.steveshipway.org/forum/ and
then run cfgmaker as you would normally but with the additional parameter of
--host-template=cisco.htp (specify the name and location of the template
file you downloaded). This will then add a CPU Target to the generated cfg
file.
The harder way is to edit the cfg file by hand to add a custom Target
definition pointing to the Cisco CPU use OID and specifying the necessary
labels and so on.
Steve
["smime.p7s" (application/x-pkcs7-signature)]
_______________________________________________
mrtg mailing list
mrtg@lists.oetiker.ch
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
--===============0416138993==--
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic