[prev in list] [next in list] [prev in thread] [next in thread]
List: mrtg
Subject: Re: [mrtg] MRTG Reporting in Bits
From: "Steve Shipway" <s.shipway () auckland ! ac ! nz>
Date: 2007-09-26 21:34:54
Message-ID: 12A6FDDD13C460408A6E47E5DB1235A2012D9C8B () UXCHANGE3 ! UoA ! auckland ! ac ! nz
[Download RAW message or body]
> Was going through a step-by-step for configuring MRTG and there was a
> line in the mrtg.cfg file that configured it to report in bits. I've
> deleted the line, deleted all the .png and .html files, but it keeps
> recreating the graphs in bits. Anyone know how to force it back into
Kb?
If you are using routers2 as a frontend, it will default to 'bits' if it
thinks the target is a network interface. If you would prefer it to
default to bytes, then either add the line
'routers.cgi*Options[_]:bytes' to the .cfg file, or else add 'bytes=yes'
to the routers2.conf file (to make it a global setting).
If you are using the native MRTG display, then you probably still have
the bits option set somewhere. Check for a global setting like
'Options[_]:bits' in your .cfg file (and any other files which it
Include:s) and remove the 'bits'. Also, check that it really is
reporting in bits - it may be reporting in bytes now, but you have
overridden the ShortLegend and so it has the wrong label.
Steve
_______________________________________________
mrtg mailing list
mrtg@lists.oetiker.ch
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic