[prev in list] [next in list] [prev in thread] [next in thread]
List: mplayer-users
Subject: Re: [MPlayer-users] Dazzle with mplayer
From: Andy Furniss <andyqos () ukfsn ! org>
Date: 2011-04-29 10:13:07
Message-ID: 4DBA8F33.6020304 () ukfsn ! org
[Download RAW message or body]
Katelyn Thode wrote:
> Hello -
>
> I am using the Dazzle with mplayer on Ubuntu Maverick 10.10.
>
> I have a camera hooked up to the dazzle through s-video.
>
> The command line I use is:
> mplayer -vo x11 tv://
-vo xv would probably be better than x11 - but then I don't know your setup.
>
> The output says the selected device is the Pinnacle Dazzle DVC 90/100/101/
> so I know it recognizes the device. It sets the current input to 0, which
> is composite1, when what I actually want is 1, which is S-Video.
tv:// -tv input=1
It's a long time since I used my dazzle (and I don't think it's the same
as yours anyway) you can set lots of things with -tv eg from my notes -
tv:// -tv
driver=v4l2:norm=PAL:input=2:amode=1:width=720:height=576:outfmt=yuy2:device=/dev/video0
Some of these probably won't be supported depending on your card.
v4l-info
should give you an idea of what yours can do.
ISTR having more success if the video/camera was on before starting mplayer.
_______________________________________________
MPlayer-users mailing list
MPlayer-users@mplayerhq.hu
https://lists.mplayerhq.hu/mailman/listinfo/mplayer-users
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic