[prev in list] [next in list] [prev in thread] [next in thread] 

List:       mandrake-expert
Subject:    Re: [expert] cd burning
From:       Favre-Nicolin Vincent <vincefn () users ! sourceforge ! net>
Date:       2004-04-21 19:38:15
Message-ID: 200404212138.15759.vincefn () users ! sourceforge ! net
[Download RAW message or body]

> I get thsi when I try to burn an audio cd in mdk 10.0 CE:
> scsidev: '1,1,0'
> scsibus: 1 target: 1 lun: 0
> cdrecord: No such file or directory. Cannot open '/dev/sg*'. Cannot open
> SCSI driver.
> cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you
> are root.
> cdrecord: For possible transport specifiers try 'cdrecord dev=help'.

   If I'm not mistaken, you seem to be using emulated scsi to burn your CD. If 
you have an IDE cd-burner, it now works perfectly well directly with IDE. So 
you can deactivate scsi emulation in your lilo.conf.

   Then, I suggest using 'k3b' (urpmi k3b if you do not already have it) as a 
cd-burner if you are not already using it. Because it rules for cd/dvd 
burning, whether it is on IDE or USB. (unless you _do_ use scsi).

   If the above does not help, you should give more information about you 
setup (type of cd-burner). And if you want to stick to generic scsi, maybe 
actually running 'cdrecord -scanbus' will help.

	Vincent
-- 
Vincent Favre-Nicolin
Université Joseph Fourier
http://v.favrenicolin.free.fr
ObjCryst & Fox : http://objcryst.sourceforge.net


[prev in list] [next in list] [prev in thread] [next in thread]