[prev in list] [next in list] [prev in thread] [next in thread]
List: mandrake-cooker-ppc
Subject: Re: DHCP questions
From: Stew Benedict <sbenedict () mandrakesoft ! com>
Date: 2003-03-28 1:57:49
[Download RAW message or body]
On Thu, 27 Mar 2003, Alex Horvath wrote:
> hi all,
>
> first, PPC 8500 w/ 2 nic, eth0 net, eth1 loc. not quite at routing yet, still \
> trying to set up dhcp.
> First thing, I have dhclient working, and it can get an address from my current \
> router 192.168.0.1 (it grabs 192.168.0.238). If I disconnect it (i.e. halt the \
> machine, disconnect the cable) then plug in the cable from my cable modem, I can't \
> get an address. dhclient works, it sends out DHCPDISCOVER, and it gets a DHCPOFFER \
> back from the isp, but it times out and says that no offers were recieved.
> Any ideas on that one ?
>
Don't have any hands on with that one, I use a hardware router to the ISP.
> Also, I have dhcpd installed, and am trying to get the computer to be a dhcp server \
> on eth1 (internal). I set up the dhcpd.conf file, and it says that it is \
> listening, but when I try to request an address from another computer, it times \
> out. The client is running win2k and I am using ipconfig /renew. This client can \
> renew from another linux box on another network.
> Again, any ideas ?
>
I serve up IP's to macs and 'doze machines here. In fact just moved the
whole setup to the powerbook running 9.1 and shut down my old server. I do
use static IP's per machine:
ddns-update-style none;
subnet 192.168.192.0 netmask 255.255.255.0 {
# default gateway - hardware router
option routers 192.168.192.11;
option subnet-mask 255.255.255.0;
option domain-name "linuxcontrol.org";
option domain-name-servers 192.168.192.45, 66.73.20.40, 206.141.193.55;
# 192.168.192.45 is the dhcpd/nameserver/samba server/netatalk etc.
default-lease-time 21600;
max-lease-time 43200;
#this is another laptop, x86 running either WindowsXP or Linux, wired or
#wireless. I used to use the same hostname for both, but current dhcpd
#doesn't care for that.
host presario {
hardware ethernet 00:90:96:19:60:20;
fixed-address 192.168.192.33;
}
host presariow {
# wireless setup
hardware ethernet 00:06:25:0b:97:97;
fixed-address 192.168.192.33;
}
That's it - more of the above for different machines.
HTH,
--
Stew Benedict
--
MandrakeSoft
PPC FAQ: http://www.linux-mandrake.com/en/ppcFAQ.php3
IRC: irc.freenode.net #cooker-ppc
Archives: http://marc.theaimsgroup.com/?l=mandrake-cooker-ppc&r=1&w=2
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic