[prev in list] [next in list] [prev in thread] [next in thread] 

List:       mandrake-cooker
Subject:    Re: [Cooker] kernel 2.6.11-6 needs some love?
From:       Kristi <temp1 () host7 ! org>
Date:       2005-03-31 23:21:43
Message-ID: 424C8607.8050700 () host7 ! org
[Download RAW message or body]

Wondering please which release you are installing:
10.1 final
10.2b1
10.2b2
10.2b3
10.2 now 2005LE rc1
2005 rc2
cooker current?
tia
Kristi

your description at the very bottom gives kern numbers.
I would suggest you grab the latest off Wiki which is 2005LErc2 and if 
you have problems, make it cooker current - it's pretty darn solid 
imho.  remember to set your easy urpmi to cooker and check that the word 
""cooker"" is in each line in step 3 before executing it.   Use Azureus 
instead of "bittorrent" - it's a hell of a lot faster, and open 6969 and 
6881-6889 ports if you use a firewall.
Kristi

Liam Quin wrote:

>[1] no penguin, just standard BIOS 80-col screen resolution.
>    I'm not sure if this is good or bad actually.
>
>[2] doesn't boot.
>    I think this is worse ;-)
>    It gets as far as
>	Initializing USB Controller (usb-uhci) [OK]
>	Initializing USB Controller (uhci-hcd) [OK]
>    and then hangs -- caps lock doesn't light up, control-C
>    doesn't do anything and neither does control-alt-del.
>
>    Next on a normal boot is Mount USB filesystems.
>    I do have an external USB drive connected.
>
>This is an Acer Tavelmate 602TER laptop,
>processor       : 0
>vendor_id       : GenuineIntel
>cpu family      : 6
>model           : 8
>model name      : Pentium III (Coppermine)
>stepping        : 1
>cpu MHz         : 784.827
>cache size      : 256 KB
>fdiv_bug        : no
>hlt_bug         : no
>f00f_bug        : no
>coma_bug        : no
>fpu             : yes
>fpu_exception   : yes
>cpuid level     : 2
>wp              : yes
>flags           : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca
>cmov pat pse36 mmx fxsr sse
>bogomips        : 1286.14
>
>[root@lapper lee]# lspci
>00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host
>bridge (rev 03)
>00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP
>bridge (rev 03)
>00:02.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
>00:02.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev
>01)
>00:02.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev
>01)
>00:02.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
>00:06.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro
>100] (rev 08)
>00:06.1 Serial controller: Agere Systems (former Lucent
>Microelectronics) LT WinModem
>00:08.0 Multimedia audio controller: ESS Technology ES1969 Solo-1
>Audiodrive (rev 02)
>00:09.0 CardBus bridge: O2 Micro, Inc. OZ6812 CardBus Controller (rev
>05)
>01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility
>P/M AGP 2x (rev 64)
>
>[root@lapper lee]# cat /proc/bus/usb/devices
>
>T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
>B:  Alloc=129/900 us (14%), #Int=  2, #Iso=  0
>D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
>P:  Vendor=0000 ProdID=0000 Rev= 2.06
>S:  Manufacturer=Linux 2.6.10-1mdk uhci_hcd
>S:  Product=UHCI Host Controller
>S:  SerialNumber=0000:00:02.2
>C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
>I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
>E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
>
>T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12  MxCh= 4
>D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
>P:  Vendor=058f ProdID=9254 Rev= 3.12
>S:  Manufacturer=ALCOR
>S:  Product=Generic USB Hub
>C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
>I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
>E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=255ms
>
>T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
>D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
>P:  Vendor=12c8 ProdID=1f03 Rev= 1.00
>S:  Manufacturer=XIMETA, Inc.
>S:  Product=NDAS / USB 2.0 Storage Device
>S:  SerialNumber=1000000165260
>C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
>I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
>Driver=usb-storage
>E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
>E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
>
>T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#=  4 Spd=1.5 MxCh= 0
>D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
>P:  Vendor=046d ProdID=c00b Rev= 6.10
>S:  Manufacturer=Logitech
>S:  Product=USB Mouse
>C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
>I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
>E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
>[root@lapper lee]#
>
>
>
>I am back to 2.6.10-1mdk since 2.6.10-2 didn't boot, and -3
>had problems with gnome-vfs (e.g. "save as" in gimp didn't work).
>
>Liam
>
>  
>


[prev in list] [next in list] [prev in thread] [next in thread]