[prev in list] [next in list] [prev in thread] [next in thread] 

List:       mandrake-cooker
Subject:    [Cooker] [Bug 15092] [kernel] NEW: Audigy Soundblaster cannot be muted neither capture mode can be t
From:       "[svetljo]" <bugzilla () qa ! linux-mandrake ! com>
Date:       2005-03-31 21:55:22
Message-ID: bug15092.20050331215522.4984 () qa ! linux-mandrake ! com
[Download RAW message or body]

User ID: 9269, 5 bugs reported (14 fixed, 4 duplicate, 0 invalid), 159 comments.

http://qa.mandrakesoft.com/show_bug.cgi?id=15092





------- Additional Comments From svetljo@gmx.de  2005-03-31 23:55 -------
looks like it's not a driver bug but a hardware limitation
and the problem seems to be noted since alsa-1.0.6
and see the date of the last comment(not the closing of the bug)
-----------
(0002303)
pzad
11-03-04 08:18
-----------


recap:
---------------------------------------
0002293)
KoxtaRF
10-31-04 15:16

	I forgot to give you my system specs...

Linux Gentoo (current)
Alsa 1.0.6
kernel 2.6.9 (using included alsa-driver)
 ----------------------------
(0002295)
pzad
11-02-04 09:31

	Did you read answer on his mail ???
http://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg13088.html [^]

Master or PCM can not be muted, because they don't have mute switch.
-------------------------------------- 
(0002298)
KoxtaRF
11-02-04 18:50

	No, I didn't.... I didn't know that it's technically impossible to mute the
Master or PCM channel. However, I remember that I was able to choose the input
source to capture simply clicking space on it. Is there a way to bring it back?
 --------------------------------
(0002303)
pzad
11-03-04 08:18

	> I didn't know that it's technically impossible to mute the Master or PCM channel.

This is posible, but need changes in driver or usage of ld10k1 (dl10k1).

>However, I remember that I was able to choose the input source to capture
simply clicking space on it. Is there a way to bring it back?

Previous versions uses AC97 ADC and you choose capture source on this AC97. Now,
philips ADC is used (it is 24 bit and has better SNR). AC97 ADC is used only for
Mic. I think, this will be step back. Under windows you can not capture from
only line in too. You can capture only "Analog Mix".

In previous alsa version you can set capture source only on sources mixed in
AC97 all other source didn't have capture switch (Audigy CD, AudigyDrive inputs,
...).
 --------------------------------
(0004085)
jdthood
03-20-05 13:29

	It looks as if this report can be closed. 

-- 
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.


------- Reminder: -------
assigned_to: kernel@mandrakesoft.com
status: NEW
distribution: cooker
creation_date: 
description: 
Launch alsamixer :
- Try to mute any mixer (key 'm'), you should see [Off] besides the mixer
description
- Try to select a capture device (press F4 on alsamixer) : no mixer settings has
the '------' field indicating the capture mode is available. When the space bar
is pressed, the field is replaced by 'L CAPTUR R', which is unavaible with this
card.

snd-emu10k1     : Creative Labs|EMU10K2 Audigy Audio Processor
[MULTIMEDIA_AUDIO] (vendor:1102 device:0004 subv:1102 subd:0053)
emu10k1-gp      : Creative Labs|EMU10K2 Audigy Gameport [INPUT_OTHER]
(vendor:1102 device:7003 subv:1102 subd:0040)
ohci1394        : Creative Labs|EMU10K2 Audigy IEEE1394 Firewire Controller
[SERIAL_FIREWIRE] (vendor:1102 device:4001 subv:1102 subd:0010)

libalsa2-1.0.8-13mdk
libalsa-data-1.0.8-13mdk
alsa-utils-1.0.8-1mdk
gnome-alsamixer-0.9.6-1mdk

Linux localhost 2.6.11-6mdk #1 Tue Mar 22 16:04:32 CET 2005 i686 AMD Athlon(tm)
 unknown GNU/Linux

[prev in list] [next in list] [prev in thread] [next in thread]