[prev in list] [next in list] [prev in thread] [next in thread] 

List:       mandrake-cooker
Subject:    [Cooker] cdrecord bug or hardware error?
From:       "Daniil V. Kolpakov" <dan () solutions ! lv>
Date:       2004-03-31 20:47:56
Message-ID: 200403312347.56232.dan () solutions ! lv
[Download RAW message or body]

Hi everyone,

I'm using "Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 
1995-2004 Jörg Schilling" on cooker with "2.6.3-7mdk-i686-up-4GB" kernel (or 
at least I'm trying to).

While recording (first 10.0 community iso) I get error (write track data: 
error after 265887744 bytes). I'm using ATA: interface and I have 
'hda=ide-cd' in /etc/lilo.conf (hda is CD-Writer). In the days of 2.4s 
kernels and ide-scsi emulation nearly everything worked fine. Are these 
kernel/cdrecord bugs or I have problem with the drive? :(

I've tried to record cd under root.

The screenshot ;] follows:

[root@shinestar /home/mdk-cooker]# cdrecord dev=ATA:0,0,0 -v -dao -eject \
                        Mandrakelinux-10.0-Community-Download-CD1.i586.iso
Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg 
Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this 
version.
TOC Type: 1 = CD-ROM
scsidev: 'ATA:0,0,0'
devname: 'ATA'
scsibus: 0 target: 0 lun: 0
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version 
(warly-scsi-linux-sg.c-1.80-mdk '@(#)scsi-linux-sg.c  1.80 04/03/08 Copyright 
1997 J. Schilling').
SCSI buffer size: 64512
atapi: -1
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   : SYNC
Vendor_info    : 'YAMAHA  '
Identifikation : 'CRW-F1E         '
Revision       : '1.0d'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE AUDIOMASTER FORCESPEED DISKTATTOO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 7469952 = 7294 KB
FIFO size      : 104857600 = 102400 KB
Track 01: data   694 MB
Total size:      798 MB (79:03.85) = 355789 sectors
Lout start:      798 MB (79:05/64) = 355789 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 6
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type C, low Beta category (C-) (6)
  ATIP start of lead in:  -11231 (97:32/19)
  ATIP start of lead out: 359846 (79:59/71)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 27
Manufacturer: Prodisc Technology Inc.
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 4057
Forcespeed is OFF.
Starting to write CD/DVD at speed  44.0 in real TAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
Performing OPC...
Starting new track at sector: 0
Track 01:  253 of  694 MB written (fifo 100%) [buf  99%]  32.3x.cdrecord: 
Success. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 01 FB 24 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 AE 00 00 00 0A 00 00 00 00 09 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x00 (track following error) Fru 0x0
Sense flags: Blk -1375731712 (not valid)
resid: 63488
cmd finished after 2.987s timeout 40s

write track data: error after 265887744 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
Writing  time:   94.228s
Average write speed  59.6x.
Min drive buffer fill was 99%
Fixating...
cdrecord: Success. close track/session: scsi sendcmd: no error
CDB:  5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 AC 00 00 00 0A 00 00 00 00 09 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x09 Qual 0x00 (track following error) Fru 0x0
Sense flags: Blk -1409286144 (not valid)
cmd finished after 13.388s timeout 480s
cmd finished after 13.388s timeout 480s
cdrecord: Cannot fixate disk.
Fixating time:   13.389s
cdrecord: fifo had 5787 puts and 4189 gets.
cdrecord: fifo was 0 times empty and 2988 times full, min fill was 99%.


-- 
/dev/brains: permission denied

Please avoid sending me Word or PowerPoint attachments.
See http://www.fsf.org/philosophy/no-word-attachments.html




[prev in list] [next in list] [prev in thread] [next in thread]