[prev in list] [next in list] [prev in thread] [next in thread] 

List:       mandrake-cooker
Subject:    [Cooker] [Bug 2255] [drakxtools] Bad frequency ranges in /etc/X11/XF86Config-4 in mdk-9.1rc2
From:       ndeb <bugzilla () linux-mandrake ! com>
Date:       2003-03-31 17:10:04
[Download RAW message or body]

http://qa.mandrakesoft.com/show_bug.cgi?id=2255





------- Additional Comments From ndeb@ece.cmu.edu  2003-03-31 19:10 -------

Output of "ddcxinfos |grep EISA":

16.07 inches monitor (truly 14.88')  EISA ID=SUN0574




Note: This monitor can do 1024x768@24_depth@85Hz.




------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.



------- Reminder: -------
assigned_to: install@mandrakesoft.com
status: UNCONFIRMED
creation_date: 
description: 
Using mandrake-9.1rc1. XFdrake generates these default ranges for 1024x768: 
 
   HorizSync 31.5- 57 
   VertRefresh 50-70 
 
Obviously, which these ranges it is impossible to get any refresh rate above 
70Hz. Since XFdrake does not allow one to choose the refresh rate, the default 
ranges should be larger, something like: 
 
   HorizSync 30- 70 
   VertRefresh 50-90 
 
Even 5+ year old cards like riva128 can do 85Hz at 1024x768@24.

[prev in list] [next in list] [prev in thread] [next in thread]