[prev in list] [next in list] [prev in thread] [next in thread]
List: mandrake-cooker
Subject: [Cooker] SCSI card, devfs problem?
From: Magnus Holmberg <pucko () lysator ! liu ! se>
Date: 2002-06-30 16:19:30
[Download RAW message or body]
I have a scsi card with a cd-rom and a scanner. And I also have a
ide cdrecorder.
I have compiled in support for scsi-emulution, and scsi-cdrom and generic
scsi support.
When I start up the machine I get:
SCSI subsystem driver Revision: 1.00
scsi0 : AM53/79C974 PCscsi driver rev. 0.5; host I/O address: 0xc800; irq:
18
Vendor: HP Model: C2500A Rev: 3332
Type: Processor ANSI SCSI revision: 02
Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SAMSUNG Model: CD-R/RW SW-212B Rev: P000
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
Attached scsi CD-ROM sr1 at scsi1, channel 0, id 2, lun 0
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 8x/32x writer cd/rw xa/form2 cdda tray
Attached scsi generic sg0 at scsi0, channel 0, id 2, lun 0, type 3
if I run
cdrecord --scanbus
I get:
Cdrecord 1.11a24 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg
Schilling
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.6'
scsibus0:
0,0,0 0) *
0,1,0 1) *
0,2,0 2) *
0,3,0 3) 'PLEXTOR ' 'CD-ROM PX-40TS ' '1.05' Removable CD-ROM
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
My scanner and My ide cd-burner disapear after a while.
If I instead compile all scsi things as modules it works just after I have
loaded the modules so I have to load and unload the modules all the time.
Is this something due to devfs ? How can I solve this?
/M
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic