[prev in list] [next in list] [prev in thread] [next in thread]
List: mandrake-cooker
Subject: [Cooker] scanner does not work: problem with sane or devfs?
From: Frederik Himpe <fhimpe () users ! sourceforge ! net>
Date: 2002-01-21 17:20:18
[Download RAW message or body]
Hi,
I just configured my SCSI adapter (old AVA1505 ISA card), to use my
scanner. Now sane-find-scanner does find it:
[root@Jupiter dev]# sane-find-scanner
# Note that sane-find-scanner will find any scanner that is connected
# to a SCSI bus and some scanners that are connected to the Universal
# Serial Bus (USB) depending on your OS. It will even find scanners
# that are not supported at all by SANE. It won't find a scanner that
# is connected to a parallel or proprietary port.
sane-find-scanner: found SCSI scanner "AGFA SNAPSCAN 1236 1.20" at
device /dev/sg1
[root@Jupiter dev]# ll /dev/sg1
lr-xr-xr-x 1 root root 36 Jan 21 18:01 /dev/sg1 ->
scsi/host1/bus0/target2/lun0/generic
But when running scanimage or xsane, it says it can't find a scanner,
and I should make sure the scanner is detected by sane-find-scanner.
Could this be a devfs problem, or something wrong with sane? Are there
others who can use their scanner?
libsane1-1.0.6-2mdk
devfsd-1.3.20-1mdk
Frederik
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic