[prev in list] [next in list] [prev in thread] [next in thread] 

List:       mandrake-cooker
Subject:    [Cooker] multiple problems with cooker.
From:       Han <han () mijncomputer ! nl>
Date:       2001-09-30 8:08:37
[Download RAW message or body]

Hi,

I am having multiple problems here. Sorry for all the attachements.

1) Newly added cookersources by rpmdrake end up in a very wrong way.
   (Bug reported and assigned)

2) Keyboardmap etc gets loaded twice.

I accidentaly choose the wrong keyboard and I corrected it with
keydrake ( or whatever it is called ).

3) The usbmouse is not working since the last cooker-update.

Ennough errors to drive you crazy. Because off one error it is getting
difficult to fix the other.


Cya, Han.

["urpmi.cfg" (text/plain)]

denmark  {
  hdlist: hdlist.denmark.cz
  with_hdlist: ../base/hdlist.cz
  list: list.denmark
}

hdlist: hdlist.\ 6 {
  hdlist: hdlist.hdlist:.cz2
  list: list.hdlist:
  ignore
}

with_hdlist: ../base/hdlist.cz {
  hdlist: hdlist.with_hdlist:.cz2
  list: list.with_hdlist:
  ignore
}

list: list.\ 6 {
  hdlist: hdlist.list:.cz2
  list: list.list:
  ignore
}

\ 6#=08=08=FD#=08M=01  {
  hdlist: hdlist. 6#=08=08=FD#=08M=01.cz
  list: list. 6#=08=08=FD#=08M=01
}



Linux version 2.4.8-26mdk (quintela@bi.mandrakesoft.com) (gcc version 2.96 20000731 \
(Mandrake Linux 8.1 2.96-0.62mdk)) #1 Sun Sep 23 17:06:39 CEST 2001 BIOS-provided \
physical RAM map:  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000c000000 (usable)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 49152
zone(0): 4096 pages.
zone(1): 45056 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=linux ro root=345 devfs=mount
Initializing CPU#0
Detected 412.373 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 822.47 BogoMIPS
Memory: 190336k/196608k available (1086k kernel code, 5888k reserved, 397k data, 712k \
init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
CPU:     After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU:             Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Pentium II (Deschutes) stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PnP: PNP BIOS installation structure at 0xc00fbfd0
PnP: PNP BIOS version 1.0, entry at f0000:bff8, dseg at f0000
PnP: 13 devices detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v0.115 (20010827) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ \
SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: queued sectors max/low 126077kB/42025kB, 384 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: QUANTUM FIREBALL CX10.2A, ATA DISK drive
hdb: ST340823A, ATA DISK drive
hdd: BDV 108A DVDROM, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 20044080 sectors (10263 MB) w/418KiB Cache, CHS=1247/255/63, UDMA(33)
hdb: 78165360 sectors (40021 MB) w/512KiB Cache, CHS=4865/255/63, UDMA(33)
hdd: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
 /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 > p3 p4
 p1: <openbsd: p11 p12 p13 p14 p15 p16 >
 p3: <bsd: p17 p18 p19 p20 p21 p22 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ide-floppy driver 0.97
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Uncompressing......done.
Freeing initrd memory: 103k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
reiserfs: checking transaction log (device 03:45) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
Freeing unused kernel memory: 712k freed
Real Time Clock Driver v1.10d
Adding Swap: 128484k swap-space (priority -1)
reiserfs: checking transaction log (device 03:47) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:48) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:49) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:4a) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:44) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-1
8139too Fast Ethernet driver 0.9.18a
PCI: Found IRQ 10 for device 00:0b.0
eth0: RealTek RTL8139 Fast Ethernet at 0xccc68000, 00:e0:4c:67:52:80, IRQ 10
eth0:  Identified 8139 chip type 'RTL-8139B'
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
  http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 11 for device 00:0d.0
eth1: RealTek RTL-8029 found at 0xe000, IRQ 11, 52:54:AB:13:D9:64.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.259 $ time 17:30:17 Sep 23 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 12 for device 00:07.2
PCI: Sharing IRQ 12 with 00:09.0
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 12
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.251:USB Universal Host Controller Interface driver
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0x46d/0xc00b) is not claimed by any active driver.
usb.c: registered new driver usb_mouse
input0: Logitech USB Mouse on usb1:2.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
Creative EMU10K1 PCI Audio Driver, version 0.15, 17:27:24 Sep 23 2001
PCI: Found IRQ 12 for device 00:09.0
PCI: Sharing IRQ 12 with 00:07.2
emu10k1: EMU10K1 rev 7 model 0x8040 found, IO at 0xd400-0xd41f, IRQ 12
ac97_codec: AC97  codec, id: 0x5452:0x4123 (TriTech TR?????)



Module                  Size  Used by
nls_cp437               4384   1  (autoclean)
smbfs                  34624   1  (autoclean)
emu10k1                54304   0 
ac97_codec              9312   0  [emu10k1]
sound                  58380   0  [emu10k1]
soundcore               4196   7  [emu10k1 sound]
hid                    18432   0  (unused)
af_packet              12552   1  (autoclean)
usbmouse                2048   0  (unused)
input                   3648   0  [hid usbmouse]
usb-uhci               21220   0  (unused)
usbcore                50752   1  [hid usbmouse usb-uhci]
ne2k-pci                5216   1  (autoclean)
8390                    6432   0  (autoclean) [ne2k-pci]
8139too                12704   0  (autoclean) (unused)
nls_iso8859-1           2880   4  (autoclean)
nls_cp850               3616   3  (autoclean)
vfat                    9980   3  (autoclean)
fat                    32184   0  (autoclean) [vfat]
rtc                     5592   0  (autoclean)
reiserfs              158304   6 

["boot.log" (text/plain)]

Sep 30 09:58:06 bereboot random: Initializing random number generator:  succeeded
Sep 30 09:58:06 bereboot sshd: Starting sshd:
Sep 30 09:58:06 bereboot sshd:  succeeded
Sep 30 09:58:06 bereboot sshd: ^[[60G[  ^[[1;32m
Sep 30 09:58:06 bereboot sshd: 
Sep 30 09:58:06 bereboot rc: Starting sshd:  succeeded
Sep 30 10:57:46 bereboot devfsd: Started device management daemon for /dev 
Sep 30 10:57:47 bereboot rc.sysinit: Running DevFs deamon succeeded 
Sep 30 10:57:48 bereboot rc.sysinit: Unmounting initrd:  succeeded 
Sep 30 10:57:48 bereboot rc.sysinit: Configuring kernel parameters:  succeeded 
Sep 30 09:57:49 bereboot date: Sun Sep 30 09:57:49 BST 2001 
Sep 30 09:57:49 bereboot rc.sysinit: Setting clock  (localtime): Sun Sep 30 09:57:49 BST 2001 succeeded 
Sep 30 09:57:49 bereboot rc.sysinit: Loading default keymap succeeded 
Sep 30 09:57:49 bereboot rc.sysinit: Activating swap partitions:  succeeded 
Sep 30 09:57:49 bereboot rc.sysinit: Setting hostname bereboot.boetes.penguinpowered.com:  succeeded 
Sep 30 09:57:49 bereboot rc.sysinit: Remounting root filesystem in read-write mode:  succeeded 
Sep 30 09:57:50 bereboot rc.sysinit: Finding module dependencies:  succeeded 
Sep 30 09:57:52 bereboot rc.sysinit: Mounting local filesystems:  succeeded 
Sep 30 09:57:52 bereboot rc.sysinit: Mounting loopback filesystems:  succeeded 
Sep 30 09:57:52 bereboot rc.sysinit: Running devfsd actions:  succeeded 
Sep 30 09:57:53 bereboot loadkeys: Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz 
Sep 30 09:57:53 bereboot keytable: Loading keymap: us succeeded 
Sep 30 09:57:53 bereboot loadkeys: Loading /usr/lib/kbd/keymaps/include/compose.latin.inc.gz 
Sep 30 09:57:54 bereboot keytable: Loading compose keys: compose.latin.inc succeeded 
Sep 30 09:57:54 bereboot keytable:  succeeded 
Sep 30 09:57:57 bereboot rc.sysinit: Enabling swap space:  succeeded 
Sep 30 09:57:59 bereboot mandrake_everytime: Building Window Manager Sessions succeeded 
Sep 30 09:58:00 bereboot usb: Loading USB interface (usb-uhci) succeeded 
Sep 30 09:58:01 bereboot usb: Mount USB filesystem succeeded 
Sep 30 09:58:02 bereboot harddrake:  succeeded 
Sep 30 09:58:03 bereboot network: Setting network parameters:  succeeded 
Sep 30 09:58:04 bereboot network: Bringing up interface lo:  succeeded 
Sep 30 09:58:05 bereboot ifup: Determining IP information for eth1... 
Sep 30 09:58:05 bereboot ifup:  done. 
Sep 30 09:58:05 bereboot network: Bringing up interface eth1:  succeeded 
Sep 30 09:58:10 bereboot xinetd: xinetd startup succeeded
Sep 30 09:58:11 bereboot sound: Loading sound module (emu10k1) succeeded
Sep 30 09:58:12 bereboot aumix: vol set to 60, 60
Sep 30 09:58:12 bereboot aumix: pcm set to 80, 80
Sep 30 09:58:12 bereboot aumix: speaker set to 67, 67
Sep 30 09:58:12 bereboot aumix: line set to 67, 67, P
Sep 30 09:58:12 bereboot aumix: mic set to 0, 0, R
Sep 30 09:58:12 bereboot aumix: cd set to 80, 80, P
Sep 30 09:58:12 bereboot aumix: igain set to 67, 67, P
Sep 30 09:58:12 bereboot aumix: line1 set to 67, 67, P
Sep 30 09:58:12 bereboot aumix: phin set to 67, 67, P
Sep 30 09:58:12 bereboot aumix: phout set to 67, 67
Sep 30 09:58:12 bereboot aumix: video set to 67, 67, P
Sep 30 09:58:12 bereboot sound: Loading mixer settings succeeded
Sep 30 09:58:12 bereboot loadkeys: Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz
Sep 30 09:58:12 bereboot keytable: Loading keymap: us succeeded
Sep 30 09:58:12 bereboot loadkeys: Loading /usr/lib/kbd/keymaps/include/compose.latin.inc.gz
Sep 30 09:58:12 bereboot keytable: Loading compose keys: compose.latin.inc succeeded
Sep 30 09:58:12 bereboot keytable:  succeeded
Sep 30 09:58:12 bereboot postfix: Starting postfix: 
Sep 30 09:58:14 bereboot postfix: postfix
Sep 30 09:58:14 bereboot rc: Starting postfix:  succeeded
Sep 30 09:58:15 bereboot numlock: Starting numlock: ^[[60G[  ^[[1;32m
Sep 30 09:58:15 bereboot numlock: 
Sep 30 09:58:15 bereboot rc: Starting numlock:  succeeded
Sep 30 09:58:16 bereboot crond: crond startup succeeded
Sep 30 09:58:16 bereboot xfs: xfs startup succeeded
Sep 30 09:58:16 bereboot anacron: anacron startup succeeded
Sep 30 09:58:16 bereboot rc: Starting kheader:  succeeded


[prev in list] [next in list] [prev in thread] [next in thread] 

Configure | About | News | Add a list | Sponsored by KoreLogic