[prev in list] [next in list] [prev in thread] [next in thread] 

List:       lustre-discuss
Subject:    [lustre-discuss] MDS hardware - NVME?
From:       Thomas Roth via lustre-discuss <lustre-discuss () lists ! lustre ! org>
Date:       2024-01-05 16:01:11
Message-ID: 71bbe745-3d05-440a-8be0-9a83635db196 () gsi ! de
[Download RAW message or body]

Dear all,

considering NVME storage for the next MDS.

As I understand, NVME disks are bundled in software, not by a hardware raid \
controller. This would be done using Linux software raid, mdadm, correct?

We have some experience with ZFS, which we use on our OSTs.
But I would like to stick to ldiskfs for the MDTs, and a zpool with a zvol on top \
which is then formatted with ldiskfs - to much voodoo...

How is this handled elsewhere? Any experiences?


The available devices are quite large. If I create a raid-10 out of 4 disks, e.g. 7 \
TB each, my MDT will be 14 TB - already close to the 16 TB limit.  So no need for a \
box with lots of U.3 slots.

But for MDS operations, we will still need a powerful dual-CPU system with lots of \
RAM. Then the NVME devices should be distributed between the CPUs?
Is there a way to pinpoint this in a call for tender?


Best regards,
Thomas

--------------------------------------------------------------------
Thomas Roth

GSI Helmholtzzentrum für Schwerionenforschung GmbH
Planckstraße 1, 64291 Darmstadt, Germany, www.gsi.de

Commercial Register / Handelsregister: Amtsgericht Darmstadt, HRB 1528
Managing Directors / Geschäftsführung:
Professor Dr. Paolo Giubellino, Dr. Ulrich Breuer, Jörg Blaurock
Chairman of the Supervisory Board / Vorsitzender des GSI-Aufsichtsrats:
State Secretary / Staatssekretär Dr. Volkmar Dietz


_______________________________________________
lustre-discuss mailing list
lustre-discuss@lists.lustre.org
http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org


[prev in list] [next in list] [prev in thread] [next in thread] 

Configure | About | News | Add a list | Sponsored by KoreLogic