[prev in list] [next in list] [prev in thread] [next in thread]
List: ltp-list
Subject: Re: [LTP] Patch to integrate ebizzy-0.3
From: Subrata Modak <subrata () linux ! vnet ! ibm ! com>
Date: 2009-03-25 6:49:46
Message-ID: 1237963066.5200.7.camel () subratamodak ! linux ! ibm ! com
[Download RAW message or body]
Hi Poornima,
I have to apolozise for the delay in reporting comments for these patch
sets:
1) Patch to integrate ebizzy-0.3,
2) Patch to fix ebizzy compile issue,
3) Patch to fix testcases exit status issue,
All of them applies fine and resolves the issue(s) you have mentioned.
However, there is some outstanding issue, that the actual Power
Management tests are not getting executed. The test(s) are showing the
following error even after applying the patches:
<<<test_output>>>
Power Management 1 CONF : Required kernel configuration for
SCHED_MC NOT set
incrementing stop
<<<execution_status>>>
However when i check my booted kernel īs config file, i see the
following:
$ uname -a
Linux 2.6.27.19-5-default #1 SMP 2009-02-28 04:40:21 +0100 i686 i686
i386 GNU/Linux
$ grep -i SCHED_MC config-2.6.27.19-5-default
CONFIG_SCHED_MC=y
The outputs, logs and the config files are attached for your reference.
May be the problem lies in the way to find out how to find out whether
the POWER MANAGEMENT options are enabled in the booted kernel. I hope
you will fix this soon and provide a patch.
Remaining, i have merged these patches and will soon send you an update
of the patches that you sent yesterday:
[Patch 1/4]: Modified existing reusable functions to test cpu
consolidation on hyper threaded system
..................
Regards--
Subrata
On Thu, 2009-03-19 at 11:20 +0530, Poornima Nayak wrote:
> diff -uprN ltp_orig/utils/benchmark/ebizzy-0.2/ChangeLog ltp/utils/benchmark/ebizzy-0.2/ChangeLog
> --- ltp_orig/utils/benchmark/ebizzy-0.2/ChangeLog 2009-03-19 02:02:13.000000000 -0500
> +++ ltp/utils/benchmark/ebizzy-0.2/ChangeLog 1969-12-31 18:00:00.000000000 -0600
> @@ -1,14 +0,0 @@
> -2008-08-15 Valerie Henson <val@nmt.edu>
> -
> - * Release 0.2.
> -
> - * Started reporting a rate of transactions per second rather than
> - just measuring the time.
> -
> - * Solaris compatibility, thanks to Rodrigo Rubira Branco
> - <rrbranco@br.ibm.com> for frequent patches and testing.
> -
> - * rand() was limiting scalability, use cheap dumb inline "random"
> - function to avoid that. Thanks to Brian Twichell
> - <twichell@us.ibm.com> for finding it and Yong Cai
> - <ycai@us.ibm.com> for testing.
> diff -uprN ltp_orig/utils/benchmark/ebizzy-0.2/configure ltp/utils/benchmark/ebizzy-0.2/configure
> --- ltp_orig/utils/benchmark/ebizzy-0.2/configure 2009-03-19 02:02:13.000000000 -0500
> +++ ltp/utils/benchmark/ebizzy-0.2/configure 1969-12-31 18:00:00.000000000 -0600
> @@ -1,27 +0,0 @@
> -#!/bin/bash
> -
> -if [ "`uname -s`" != "Linux" ] && [ "`uname -s`" != "SunOS" ]; then
> - echo "Only Linux or Solaris supported"
> - exit 1
> -fi
> -
> -LIBS="-lpthread"
> -FLAGS=""
> -
> -if [ "`uname -s`" = "SunOS" ]; then
> - LIBS="${LIBS} -lmalloc"
> - FLAGS="${FLAGS} -D_solaris"
> -fi
> -
> -cat <<EOF > Makefile
> -all: ebizzy
> -
> -ebizzy: ebizzy.c
> - gcc -Wall -Wshadow ${LIBS} ${FLAGS} -o ebizzy ebizzy.c
> -
> -clean:
> - rm -f ebizzy *~
> -EOF
> -
> -echo "Type 'make' to compile"
> -
> diff -uprN ltp_orig/utils/benchmark/ebizzy-0.2/ebizzy.c ltp/utils/benchmark/ebizzy-0.2/ebizzy.c
> --- ltp_orig/utils/benchmark/ebizzy-0.2/ebizzy.c 2009-03-19 02:02:13.000000000 -0500
> +++ ltp/utils/benchmark/ebizzy-0.2/ebizzy.c 1969-12-31 18:00:00.000000000 -0600
> @@ -1,519 +0,0 @@
> -/*
> - * Ebizzy - replicate a large ebusiness type of workload.
> - *
> - * Written by Valerie Henson <val@nmt.edu>
> - *
> - * Copyright 2006 - 2007 Intel Corporation
> - * Copyright 2007 Valerie Henson <val@nmt.edu>
> - *
> - * Rodrigo Rubira Branco <rrbranco@br.ibm.com> - Solaris port
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; version 2 of the License.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
> - * USA
> - *
> - */
> -
> -/*
> - * This program is designed to replicate a common web search app
> - * workload. A lot of search applications have the basic pattern: Get
> - * a request to find a certain record, index into the chunk of memory
> - * that contains it, copy it into another chunk, then look it up via
> - * binary search. The interesting parts of this workload are:
> - *
> - * Large working set
> - * Data alloc/copy/free cycle
> - * Unpredictable data access patterns
> - *
> - * Fiddle with the command line options until you get something
> - * resembling the kind of workload you want to investigate.
> - *
> - */
> -
> -#include <stdio.h>
> -#include <unistd.h>
> -#include <stdlib.h>
> -#include <malloc.h>
> -#include <sys/mman.h>
> -#include <pthread.h>
> -#include <string.h>
> -#include <time.h>
> -#include <sys/time.h>
> -#include <sys/resource.h>
> -
> -/*
> - * Solaris compatibility stuff
> - */
> -
> -#ifdef _solaris
> -#define MMAP_ANONYMOUS MMAP_ANON
> -#define M_MMAP_MAX (-4)
> -#endif
> -
> -/*
> - * Command line options
> - */
> -
> -static unsigned int always_mmap;
> -static unsigned int never_mmap;
> -static unsigned int chunks;
> -static unsigned int use_permissions;
> -static unsigned int use_holes;
> -static unsigned int random_size;
> -static unsigned int chunk_size;
> -static unsigned int seconds;
> -static unsigned int threads;
> -static unsigned int verbose;
> -static unsigned int linear;
> -static unsigned int no_lib_memcpy;
> -
> -/*
> - * Other global variables
> - */
> -
> -typedef size_t record_t;
> -static unsigned int record_size = sizeof (record_t);
> -static char *cmd;
> -static record_t **mem;
> -static char **hole_mem;
> -static unsigned int page_size;
> -static time_t start_time;
> -static volatile int threads_go;
> -static unsigned int records_read;
> -
> -static void
> -usage(void)
> -{
> - fprintf(stderr, "Usage: %s [options]\n"
> - "-l\t\t Don't use library memcpy\n"
> - "-m\t\t Always use mmap instead of malloc\n"
> - "-M\t\t Never use mmap\n"
> - "-n <num>\t Number of memory chunks to allocate\n"
> - "-p \t\t Prevent mmap coalescing using permissions\n"
> - "-P \t\t Prevent mmap coalescing using holes\n"
> - "-R\t\t Randomize size of memory to copy and search\n"
> - "-s <size>\t Size of memory chunks, in bytes\n"
> - "-S <seconds>\t Number of seconds to run\n"
> - "-t <num>\t Number of threads (2 * number cpus by default)\n"
> - "-v[v[v]]\t Be verbose (more v's for more verbose)\n"
> - "-z\t\t Linear search instead of binary search\n",
> - cmd);
> - exit(1);
> -}
> -
> -/*
> - * Read options, check them, and set some defaults.
> - */
> -
> -static void
> -read_options(int argc, char *argv[])
> -{
> - int c;
> -
> - page_size = getpagesize();
> -
> - /*
> - * Set some defaults. These are currently tuned to run in a
> - * reasonable amount of time on my laptop.
> - *
> - * We could set the static defaults in the declarations, but
> - * then the defaults would be split between here and the top
> - * of the file, which is annoying.
> - */
> -
> - threads = 2 * sysconf(_SC_NPROCESSORS_ONLN);
> - chunks = 10;
> - chunk_size = record_size * 64 * 1024;
> - seconds = 10;
> -
> - /* On to option processing */
> -
> - cmd = argv[0];
> - opterr = 1;
> -
> - while ((c = getopt(argc, argv, "lmMn:pPRs:S:t:vz")) != -1) {
> - switch (c) {
> - case 'l':
> - no_lib_memcpy = 1;
> - break;
> - case 'm':
> - always_mmap = 1;
> - break;
> - case 'M':
> - never_mmap = 1;
> - break;
> - case 'n':
> - chunks = atoi(optarg);
> - if (chunks == 0)
> - usage();
> - break;
> - case 'p':
> - use_permissions = 1;
> - break;
> - case 'P':
> - use_holes = 1;
> - break;
> - case 'R':
> - random_size = 1;
> - break;
> - case 's':
> - chunk_size = atoi(optarg);
> - if (chunk_size == 0)
> - usage();
> - break;
> - case 'S':
> - seconds = atoi(optarg);
> - if (seconds == 0)
> - usage();
> - break;
> - case 't':
> - threads = atoi(optarg);
> - if (threads == 0)
> - usage();
> - break;
> - case 'v':
> - verbose++;
> - break;
> - case 'z':
> - linear = 1;
> - break;
> - default:
> - usage();
> - }
> - }
> -
> - if (verbose)
> - printf("ebizzy 0.2\n"
> - "(C) 2006-7 Intel Corporation\n"
> - "(C) 2007 Valerie Henson <val@nmt.edu>\n");
> -
> - if (verbose) {
> - printf("always_mmap %u\n", always_mmap);
> - printf("never_mmap %u\n", never_mmap);
> - printf("chunks %u\n", chunks);
> - printf("prevent coalescing using permissions %u\n",
> - use_permissions);
> - printf("prevent coalescing using holes %u\n", use_holes);
> - printf("random_size %u\n", random_size);
> - printf("chunk_size %u\n", chunk_size);
> - printf("seconds %d\n", seconds);
> - printf("threads %u\n", threads);
> - printf("verbose %u\n", verbose);
> - printf("linear %u\n", linear);
> - printf("page size %d\n", page_size);
> - }
> -
> - /* Check for incompatible options */
> -
> - if (always_mmap && never_mmap) {
> - fprintf(stderr, "Both -m \"always mmap\" and -M "
> - "\"never mmap\" option specified\n");
> - usage();
> - }
> -
> - if (never_mmap)
> - mallopt(M_MMAP_MAX, 0);
> -
> - if (chunk_size < record_size) {
> - fprintf(stderr, "Chunk size %u smaller than record size %u\n",
> - chunk_size, record_size);
> - usage();
> - }
> -}
> -
> -static void *
> -alloc_mem(size_t size)
> -{
> - char *p;
> - int err = 0;
> -
> - if (always_mmap) {
> - p = mmap((void *) 0, size, (PROT_READ | PROT_WRITE),
> - (MAP_PRIVATE | MAP_ANONYMOUS), -1, 0);
> - if (p == MAP_FAILED)
> - err = 1;
> - } else {
> - p = malloc(size);
> - if (p == NULL)
> - err = 1;
> - }
> -
> - if (err) {
> - fprintf(stderr, "Couldn't allocate %zu bytes, try smaller "
> - "chunks or size options\n"
> - "Using -n %u chunks and -s %u size\n",
> - size, chunks, chunk_size);
> - exit(1);
> - }
> -
> - return (p);
> -}
> -
> -static void
> -free_mem(void *p, size_t size)
> -{
> - if (always_mmap)
> - munmap(p, size);
> - else
> - free(p);
> -}
> -
> -/*
> - * Factor out differences in memcpy implementation by optionally using
> - * our own simple memcpy implementation.
> - */
> -
> -static void
> -my_memcpy(void *dest, void *src, size_t len)
> -{
> - char *d = (char *) dest;
> - char *s = (char *) src;
> - int i;
> -
> - for (i = 0; i < len; i++)
> - d[i] = s[i];
> - return;
> -}
> -
> -static void
> -allocate(void)
> -{
> - int i;
> -
> - mem = alloc_mem(chunks * sizeof (record_t *));
> -
> - if (use_holes)
> - hole_mem = alloc_mem(chunks * sizeof (record_t *));
> -
> -
> - for (i = 0; i < chunks; i++) {
> - mem[i] = (record_t *) alloc_mem(chunk_size);
> - /* Prevent coalescing using holes */
> - if (use_holes)
> - hole_mem[i] = alloc_mem(page_size);
> - }
> -
> - /* Free hole memory */
> - if (use_holes)
> - for (i = 0; i < chunks; i++)
> - free_mem(hole_mem[i], page_size);
> -
> - if (verbose)
> - printf("Allocated memory\n");
> -}
> -
> -static void
> -write_pattern(void)
> -{
> - int i, j;
> -
> - for (i = 0; i < chunks; i++) {
> - for(j = 0; j < chunk_size / record_size; j++)
> - mem[i][j] = (record_t) j;
> - /* Prevent coalescing by alternating permissions */
> - if (use_permissions && (i % 2) == 0)
> - mprotect((void *) mem[i], chunk_size, PROT_READ);
> - }
> - if (verbose)
> - printf("Wrote memory\n");
> -}
> -
> -static void *
> -linear_search(record_t key, record_t *base, size_t size)
> -{
> - record_t *p;
> - record_t *end = base + (size / record_size);
> -
> - for(p = base; p < end; p++)
> - if (*p == key)
> - return p;
> - return NULL;
> -}
> -
> -static int
> -compare(const void *p1, const void *p2)
> -{
> - return (* (record_t *) p1 - * (record_t *) p2);
> -}
> -
> -/*
> - * Stupid ranged random number function. We don't care about quality.
> - *
> - * Inline because it's starting to be a scaling issue.
> - */
> -
> -static inline unsigned int
> -rand_num(unsigned int max, unsigned int state)
> -{
> - state = state * 1103515245 + 12345;
> - return ((state/65536) % max);
> -}
> -
> -/*
> - * This function is the meat of the program; the rest is just support.
> - *
> - * In this function, we randomly select a memory chunk, copy it into a
> - * newly allocated buffer, randomly select a search key, look it up,
> - * then free the memory. An option tells us to allocate and copy a
> - * randomly sized chunk of the memory instead of the whole thing.
> - *
> - * Linear search provided for sanity checking.
> - *
> - */
> -
> -static unsigned int
> -search_mem(void)
> -{
> - record_t key, *found;
> - record_t *src, *copy;
> - unsigned int chunk;
> - size_t copy_size = chunk_size;
> - unsigned int i;
> - unsigned int state;
> -
> - for (i = 0; threads_go == 1; i++) {
> - chunk = rand_num(chunks, state);
> - src = mem[chunk];
> - /*
> - * If we're doing random sizes, we need a non-zero
> - * multiple of record size.
> - */
> - if (random_size)
> - copy_size = (rand_num(chunk_size / record_size, state)
> - + 1) * record_size;
> - copy = alloc_mem(copy_size);
> - if (no_lib_memcpy)
> - my_memcpy(copy, src, copy_size);
> - else
> - memcpy(copy, src, copy_size);
> - key = rand_num(copy_size / record_size, state);
> -
> - if (verbose > 2)
> - printf("Search key %zu, copy size %zu\n", key, copy_size);
> - if (linear)
> - found = linear_search(key, copy, copy_size);
> - else
> - found = bsearch(&key, copy, copy_size / record_size,
> - record_size, compare);
> - /* Below check is mainly for memory corruption or other bug */
> - if (found == NULL) {
> - fprintf(stderr, "Couldn't find key %zd\n", key);
> - exit(1);
> - }
> - free_mem(copy, copy_size);
> - }
> -
> - return (i);
> -}
> -
> -static void *
> -thread_run(void *arg)
> -{
> -
> - if (verbose > 1)
> - printf("Thread started\n");
> -
> - /* Wait for the start signal */
> -
> - while (threads_go == 0);
> -
> - records_read += search_mem();
> -
> - if (verbose > 1)
> - printf("Thread finished, %f seconds\n",
> - difftime(time(NULL), start_time));
> -
> - return NULL;
> -}
> -
> -static struct timeval
> -difftimeval(struct timeval *end, struct timeval *start)
> -{
> - struct timeval diff;
> - diff.tv_sec = end->tv_sec - start->tv_sec;
> - diff.tv_usec = end->tv_usec - start->tv_usec;
> - return diff;
> -}
> -
> -static void
> -start_threads(void)
> -{
> - pthread_t thread_array[threads];
> - double elapsed;
> - unsigned int i;
> - struct rusage start_ru, end_ru;
> - struct timeval usr_time, sys_time;
> - int err;
> -
> - if (verbose)
> - printf("Threads starting\n");
> -
> - for (i = 0; i < threads; i++) {
> - err = pthread_create(&thread_array[i], NULL, thread_run, NULL);
> - if (err) {
> - fprintf(stderr, "Error creating thread %d\n", i);
> - exit(1);
> - }
> - }
> -
> - /*
> - * Begin accounting - this is when we actually do the things
> - * we want to measure. */
> -
> - getrusage(RUSAGE_SELF, &start_ru);
> - start_time = time(NULL);
> - threads_go = 1;
> - sleep(seconds);
> - threads_go = 0;
> - elapsed = difftime(time(NULL), start_time);
> - getrusage(RUSAGE_SELF, &end_ru);
> -
> - /*
> - * The rest is just clean up.
> - */
> -
> - for (i = 0; i < threads; i++) {
> - err = pthread_join(thread_array[i], NULL);
> - if (err) {
> - fprintf(stderr, "Error joining thread %d\n", i);
> - exit(1);
> - }
> - }
> -
> - if (verbose)
> - printf("Threads finished\n");
> -
> - printf("%u records/s\n",
> - (unsigned int) (((double) records_read)/elapsed));
> -
> - usr_time = difftimeval(&end_ru.ru_utime, &start_ru.ru_utime);
> - sys_time = difftimeval(&end_ru.ru_stime, &start_ru.ru_stime);
> -
> - printf("real %5.2f s\n", elapsed);
> - printf("user %5.2f s\n", usr_time.tv_sec + usr_time.tv_usec/1e6);
> - printf("sys %5.2f s\n", sys_time.tv_sec + sys_time.tv_usec/1e6);
> -}
> -
> -int
> -main(int argc, char *argv[])
> -{
> - read_options(argc, argv);
> -
> - allocate();
> -
> - write_pattern();
> -
> - start_threads();
> -
> - return 0;
> -}
> diff -uprN ltp_orig/utils/benchmark/ebizzy-0.2/LICENSE ltp/utils/benchmark/ebizzy-0.2/LICENSE
> --- ltp_orig/utils/benchmark/ebizzy-0.2/LICENSE 2009-03-19 02:02:13.000000000 -0500
> +++ ltp/utils/benchmark/ebizzy-0.2/LICENSE 1969-12-31 18:00:00.000000000 -0600
> @@ -1,340 +0,0 @@
> - GNU GENERAL PUBLIC LICENSE
> - Version 2, June 1991
> -
> - Copyright (C) 1989, 1991 Free Software Foundation, Inc.
> - 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> - Everyone is permitted to copy and distribute verbatim copies
> - of this license document, but changing it is not allowed.
> -
> - Preamble
> -
> - The licenses for most software are designed to take away your
> -freedom to share and change it. By contrast, the GNU General Public
> -License is intended to guarantee your freedom to share and change free
> -software--to make sure the software is free for all its users. This
> -General Public License applies to most of the Free Software
> -Foundation's software and to any other program whose authors commit to
> -using it. (Some other Free Software Foundation software is covered by
> -the GNU Library General Public License instead.) You can apply it to
> -your programs, too.
> -
> - When we speak of free software, we are referring to freedom, not
> -price. Our General Public Licenses are designed to make sure that you
> -have the freedom to distribute copies of free software (and charge for
> -this service if you wish), that you receive source code or can get it
> -if you want it, that you can change the software or use pieces of it
> -in new free programs; and that you know you can do these things.
> -
> - To protect your rights, we need to make restrictions that forbid
> -anyone to deny you these rights or to ask you to surrender the rights.
> -These restrictions translate to certain responsibilities for you if you
> -distribute copies of the software, or if you modify it.
> -
> - For example, if you distribute copies of such a program, whether
> -gratis or for a fee, you must give the recipients all the rights that
> -you have. You must make sure that they, too, receive or can get the
> -source code. And you must show them these terms so they know their
> -rights.
> -
> - We protect your rights with two steps: (1) copyright the software, and
> -(2) offer you this license which gives you legal permission to copy,
> -distribute and/or modify the software.
> -
> - Also, for each author's protection and ours, we want to make certain
> -that everyone understands that there is no warranty for this free
> -software. If the software is modified by someone else and passed on, we
> -want its recipients to know that what they have is not the original, so
> -that any problems introduced by others will not reflect on the original
> -authors' reputations.
> -
> - Finally, any free program is threatened constantly by software
> -patents. We wish to avoid the danger that redistributors of a free
> -program will individually obtain patent licenses, in effect making the
> -program proprietary. To prevent this, we have made it clear that any
> -patent must be licensed for everyone's free use or not licensed at all.
> -
> - The precise terms and conditions for copying, distribution and
> -modification follow.
> -
> - GNU GENERAL PUBLIC LICENSE
> - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
> -
> - 0. This License applies to any program or other work which contains
> -a notice placed by the copyright holder saying it may be distributed
> -under the terms of this General Public License. The "Program", below,
> -refers to any such program or work, and a "work based on the Program"
> -means either the Program or any derivative work under copyright law:
> -that is to say, a work containing the Program or a portion of it,
> -either verbatim or with modifications and/or translated into another
> -language. (Hereinafter, translation is included without limitation in
> -the term "modification".) Each licensee is addressed as "you".
> -
> -Activities other than copying, distribution and modification are not
> -covered by this License; they are outside its scope. The act of
> -running the Program is not restricted, and the output from the Program
> -is covered only if its contents constitute a work based on the
> -Program (independent of having been made by running the Program).
> -Whether that is true depends on what the Program does.
> -
> - 1. You may copy and distribute verbatim copies of the Program's
> -source code as you receive it, in any medium, provided that you
> -conspicuously and appropriately publish on each copy an appropriate
> -copyright notice and disclaimer of warranty; keep intact all the
> -notices that refer to this License and to the absence of any warranty;
> -and give any other recipients of the Program a copy of this License
> -along with the Program.
> -
> -You may charge a fee for the physical act of transferring a copy, and
> -you may at your option offer warranty protection in exchange for a fee.
> -
> - 2. You may modify your copy or copies of the Program or any portion
> -of it, thus forming a work based on the Program, and copy and
> -distribute such modifications or work under the terms of Section 1
> -above, provided that you also meet all of these conditions:
> -
> - a) You must cause the modified files to carry prominent notices
> - stating that you changed the files and the date of any change.
> -
> - b) You must cause any work that you distribute or publish, that in
> - whole or in part contains or is derived from the Program or any
> - part thereof, to be licensed as a whole at no charge to all third
> - parties under the terms of this License.
> -
> - c) If the modified program normally reads commands interactively
> - when run, you must cause it, when started running for such
> - interactive use in the most ordinary way, to print or display an
> - announcement including an appropriate copyright notice and a
> - notice that there is no warranty (or else, saying that you provide
> - a warranty) and that users may redistribute the program under
> - these conditions, and telling the user how to view a copy of this
> - License. (Exception: if the Program itself is interactive but
> - does not normally print such an announcement, your work based on
> - the Program is not required to print an announcement.)
> -
> -These requirements apply to the modified work as a whole. If
> -identifiable sections of that work are not derived from the Program,
> -and can be reasonably considered independent and separate works in
> -themselves, then this License, and its terms, do not apply to those
> -sections when you distribute them as separate works. But when you
> -distribute the same sections as part of a whole which is a work based
> -on the Program, the distribution of the whole must be on the terms of
> -this License, whose permissions for other licensees extend to the
> -entire whole, and thus to each and every part regardless of who wrote it.
> -
> -Thus, it is not the intent of this section to claim rights or contest
> -your rights to work written entirely by you; rather, the intent is to
> -exercise the right to control the distribution of derivative or
> -collective works based on the Program.
> -
> -In addition, mere aggregation of another work not based on the Program
> -with the Program (or with a work based on the Program) on a volume of
> -a storage or distribution medium does not bring the other work under
> -the scope of this License.
> -
> - 3. You may copy and distribute the Program (or a work based on it,
> -under Section 2) in object code or executable form under the terms of
> -Sections 1 and 2 above provided that you also do one of the following:
> -
> - a) Accompany it with the complete corresponding machine-readable
> - source code, which must be distributed under the terms of Sections
> - 1 and 2 above on a medium customarily used for software interchange; or,
> -
> - b) Accompany it with a written offer, valid for at least three
> - years, to give any third party, for a charge no more than your
> - cost of physically performing source distribution, a complete
> - machine-readable copy of the corresponding source code, to be
> - distributed under the terms of Sections 1 and 2 above on a medium
> - customarily used for software interchange; or,
> -
> - c) Accompany it with the information you received as to the offer
> - to distribute corresponding source code. (This alternative is
> - allowed only for noncommercial distribution and only if you
> - received the program in object code or executable form with such
> - an offer, in accord with Subsection b above.)
> -
> -The source code for a work means the preferred form of the work for
> -making modifications to it. For an executable work, complete source
> -code means all the source code for all modules it contains, plus any
> -associated interface definition files, plus the scripts used to
> -control compilation and installation of the executable. However, as a
> -special exception, the source code distributed need not include
> -anything that is normally distributed (in either source or binary
> -form) with the major components (compiler, kernel, and so on) of the
> -operating system on which the executable runs, unless that component
> -itself accompanies the executable.
> -
> -If distribution of executable or object code is made by offering
> -access to copy from a designated place, then offering equivalent
> -access to copy the source code from the same place counts as
> -distribution of the source code, even though third parties are not
> -compelled to copy the source along with the object code.
> -
> - 4. You may not copy, modify, sublicense, or distribute the Program
> -except as expressly provided under this License. Any attempt
> -otherwise to copy, modify, sublicense or distribute the Program is
> -void, and will automatically terminate your rights under this License.
> -However, parties who have received copies, or rights, from you under
> -this License will not have their licenses terminated so long as such
> -parties remain in full compliance.
> -
> - 5. You are not required to accept this License, since you have not
> -signed it. However, nothing else grants you permission to modify or
> -distribute the Program or its derivative works. These actions are
> -prohibited by law if you do not accept this License. Therefore, by
> -modifying or distributing the Program (or any work based on the
> -Program), you indicate your acceptance of this License to do so, and
> -all its terms and conditions for copying, distributing or modifying
> -the Program or works based on it.
> -
> - 6. Each time you redistribute the Program (or any work based on the
> -Program), the recipient automatically receives a license from the
> -original licensor to copy, distribute or modify the Program subject to
> -these terms and conditions. You may not impose any further
> -restrictions on the recipients' exercise of the rights granted herein.
> -You are not responsible for enforcing compliance by third parties to
> -this License.
> -
> - 7. If, as a consequence of a court judgment or allegation of patent
> -infringement or for any other reason (not limited to patent issues),
> -conditions are imposed on you (whether by court order, agreement or
> -otherwise) that contradict the conditions of this License, they do not
> -excuse you from the conditions of this License. If you cannot
> -distribute so as to satisfy simultaneously your obligations under this
> -License and any other pertinent obligations, then as a consequence you
> -may not distribute the Program at all. For example, if a patent
> -license would not permit royalty-free redistribution of the Program by
> -all those who receive copies directly or indirectly through you, then
> -the only way you could satisfy both it and this License would be to
> -refrain entirely from distribution of the Program.
> -
> -If any portion of this section is held invalid or unenforceable under
> -any particular circumstance, the balance of the section is intended to
> -apply and the section as a whole is intended to apply in other
> -circumstances.
> -
> -It is not the purpose of this section to induce you to infringe any
> -patents or other property right claims or to contest validity of any
> -such claims; this section has the sole purpose of protecting the
> -integrity of the free software distribution system, which is
> -implemented by public license practices. Many people have made
> -generous contributions to the wide range of software distributed
> -through that system in reliance on consistent application of that
> -system; it is up to the author/donor to decide if he or she is willing
> -to distribute software through any other system and a licensee cannot
> -impose that choice.
> -
> -This section is intended to make thoroughly clear what is believed to
> -be a consequence of the rest of this License.
> -
> - 8. If the distribution and/or use of the Program is restricted in
> -certain countries either by patents or by copyrighted interfaces, the
> -original copyright holder who places the Program under this License
> -may add an explicit geographical distribution limitation excluding
> -those countries, so that distribution is permitted only in or among
> -countries not thus excluded. In such case, this License incorporates
> -the limitation as if written in the body of this License.
> -
> - 9. The Free Software Foundation may publish revised and/or new versions
> -of the General Public License from time to time. Such new versions will
> -be similar in spirit to the present version, but may differ in detail to
> -address new problems or concerns.
> -
> -Each version is given a distinguishing version number. If the Program
> -specifies a version number of this License which applies to it and "any
> -later version", you have the option of following the terms and conditions
> -either of that version or of any later version published by the Free
> -Software Foundation. If the Program does not specify a version number of
> -this License, you may choose any version ever published by the Free Software
> -Foundation.
> -
> - 10. If you wish to incorporate parts of the Program into other free
> -programs whose distribution conditions are different, write to the author
> -to ask for permission. For software which is copyrighted by the Free
> -Software Foundation, write to the Free Software Foundation; we sometimes
> -make exceptions for this. Our decision will be guided by the two goals
> -of preserving the free status of all derivatives of our free software and
> -of promoting the sharing and reuse of software generally.
> -
> - NO WARRANTY
> -
> - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
> -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
> -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
> -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
> -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
> -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
> -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
> -REPAIR OR CORRECTION.
> -
> - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
> -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
> -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
> -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
> -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
> -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
> -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
> -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
> -POSSIBILITY OF SUCH DAMAGES.
> -
> - END OF TERMS AND CONDITIONS
> -
> - How to Apply These Terms to Your New Programs
> -
> - If you develop a new program, and you want it to be of the greatest
> -possible use to the public, the best way to achieve this is to make it
> -free software which everyone can redistribute and change under these terms.
> -
> - To do so, attach the following notices to the program. It is safest
> -to attach them to the start of each source file to most effectively
> -convey the exclusion of warranty; and each file should have at least
> -the "copyright" line and a pointer to where the full notice is found.
> -
> - <one line to give the program's name and a brief idea of what it does.>
> - Copyright (C) <year> <name of author>
> -
> - This program is free software; you can redistribute it and/or modify
> - it under the terms of the GNU General Public License as published by
> - the Free Software Foundation; either version 2 of the License, or
> - (at your option) any later version.
> -
> - This program is distributed in the hope that it will be useful,
> - but WITHOUT ANY WARRANTY; without even the implied warranty of
> - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - GNU General Public License for more details.
> -
> - You should have received a copy of the GNU General Public License
> - along with this program; if not, write to the Free Software
> - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> -
> -
> -Also add information on how to contact you by electronic and paper mail.
> -
> -If the program is interactive, make it output a short notice like this
> -when it starts in an interactive mode:
> -
> - Gnomovision version 69, Copyright (C) year name of author
> - Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
> - This is free software, and you are welcome to redistribute it
> - under certain conditions; type `show c' for details.
> -
> -The hypothetical commands `show w' and `show c' should show the appropriate
> -parts of the General Public License. Of course, the commands you use may
> -be called something other than `show w' and `show c'; they could even be
> -mouse-clicks or menu items--whatever suits your program.
> -
> -You should also get your employer (if you work as a programmer) or your
> -school, if any, to sign a "copyright disclaimer" for the program, if
> -necessary. Here is a sample; alter the names:
> -
> - Yoyodyne, Inc., hereby disclaims all copyright interest in the program
> - `Gnomovision' (which makes passes at compilers) written by James Hacker.
> -
> - <signature of Ty Coon>, 1 April 1989
> - Ty Coon, President of Vice
> -
> -This General Public License does not permit incorporating your program into
> -proprietary programs. If your program is a subroutine library, you may
> -consider it more useful to permit linking proprietary applications with the
> -library. If this is what you want to do, use the GNU Library General
> -Public License instead of this License.
> diff -uprN ltp_orig/utils/benchmark/ebizzy-0.2/Makefile ltp/utils/benchmark/ebizzy-0.2/Makefile
> --- ltp_orig/utils/benchmark/ebizzy-0.2/Makefile 2009-03-19 02:02:13.000000000 -0500
> +++ ltp/utils/benchmark/ebizzy-0.2/Makefile 1969-12-31 18:00:00.000000000 -0600
> @@ -1,7 +0,0 @@
> -all: ebizzy
> -
> -ebizzy: ebizzy.c
> - gcc -Wall -Wshadow -lpthread -o ebizzy ebizzy.c
> -
> -clean:
> - rm -f ebizzy *~
> diff -uprN ltp_orig/utils/benchmark/ebizzy-0.2/README ltp/utils/benchmark/ebizzy-0.2/README
> --- ltp_orig/utils/benchmark/ebizzy-0.2/README 2009-03-19 02:02:13.000000000 -0500
> +++ ltp/utils/benchmark/ebizzy-0.2/README 1969-12-31 18:00:00.000000000 -0600
> @@ -1,62 +0,0 @@
> -ebizzy
> -------
> -
> -ebizzy is designed to generate a workload resembling common web
> -application server workloads. It is highly threaded, has a large
> -in-memory working set with low locality, and allocates and deallocates
> -memory frequently. When running most efficiently, it will max out the
> -CPU.
> -
> -Compiling
> ----------
> -
> -First configure ebizzy for your platform by typing "./configure".
> -Currently Linux and Solaris anre supported. Then type "make". The
> -resulting binary will be named "ebizzy".
> -
> -Running
> --------
> -
> -ebizzy does not require any command line arguments. To get
> -results, just run it:
> -
> -$ ./ebizzy
> -2569 records/s
> -real 10.00 s
> -user 2.74 s
> -sys 7.24 s
> -
> -The records per second rate should be as high as possible, and the
> -system time as low as possible. Play with the various options to try
> -to increase this time to see where overhead is coming from. Note that
> -the default number of threads is 2 per number of cpus.
> -
> -An interesting part of this app is difference between memory
> -allocation using the "always mmap" and "never mmap" flags. -m is
> -"always mmap" and -M is "never mmap":
> -
> -$ ./ebizzy -M
> -3997 records/s
> -real 10.00 s
> -user 3.70 s
> -sys 5.65 s
> -$ ./ebizzy -m
> -2577 records/s
> -real 10.00 s
> -user 2.40 s
> -sys 7.43 s
> -
> -The output of the above two commands should be quite different.
> -
> -ebizzy has many command line arguments. To get a list of them and
> -their descriptions, type:
> -
> -$ ./ebizzy -?
> -
> -Support
> --------
> -
> -There is none. However, you can try emailing the author with
> -questions and suggestions.
> -
> -Val Henson <val@nmt.edu>
> diff -uprN ltp_orig/utils/benchmark/ebizzy-0.3/ChangeLog ltp/utils/benchmark/ebizzy-0.3/ChangeLog
> --- ltp_orig/utils/benchmark/ebizzy-0.3/ChangeLog 1969-12-31 18:00:00.000000000 -0600
> +++ ltp/utils/benchmark/ebizzy-0.3/ChangeLog 2009-03-19 12:50:06.000000000 -0500
> @@ -0,0 +1,21 @@
> +2007-10-01 Valerie Henson <val@nmt.edu>
> +
> + * Release 0.3.
> +
> + * Added FreeBSD and HP-UX compatibility, thanks to Rodrigo Rubira Branco
> + <rrbranco@br.ibm.com> for frequent patches and testing.
> +
> +2007-08-15 Valerie Henson <val@nmt.edu>
> +
> + * Release 0.2.
> +
> + * Started reporting a rate of transactions per second rather than
> + just measuring the time.
> +
> + * Solaris compatibility, thanks to Rodrigo Rubira Branco
> + <rrbranco@br.ibm.com> for frequent patches and testing.
> +
> + * rand() was limiting scalability, use cheap dumb inline "random"
> + function to avoid that. Thanks to Brian Twichell
> + <twichell@us.ibm.com> for finding it and Yong Cai
> + <ycai@us.ibm.com> for testing.
> diff -uprN ltp_orig/utils/benchmark/ebizzy-0.3/configure ltp/utils/benchmark/ebizzy-0.3/configure
> --- ltp_orig/utils/benchmark/ebizzy-0.3/configure 1969-12-31 18:00:00.000000000 -0600
> +++ ltp/utils/benchmark/ebizzy-0.3/configure 2009-03-19 12:50:06.000000000 -0500
> @@ -0,0 +1,41 @@
> +#!/bin/sh
> +
> +OS=`uname -s`
> +SUPPORTED="Linux SunOS HP-UX FreeBSD"
> +
> +for i in `echo "$SUPPORTED"`
> +do
> + if [ "$OS" = "$i" ]; then
> + supported="yes"
> + break
> + fi
> +done
> +
> +if [ "$supported" != "yes" ]; then
> + echo "Only this list are supported for now: $SUPPORTED"
> + exit 1
> +fi
> +
> +LIBS="-lpthread"
> +FLAGS=""
> +
> +case "$OS" in
> + "SunOS")
> + LIBS="${LIBS} -lmalloc";
> + FLAGS="${FLAGS} -D_solaris";;
> + "FreeBSD")
> + FLAGS="${FLAGS} -D_freebsd";;
> +esac
> +
> +cat <<EOF > Makefile
> +all: ebizzy
> +
> +ebizzy: ebizzy.c
> + gcc -Wall -Wshadow ${LIBS} ${FLAGS} -o ebizzy ebizzy.c
> +
> +clean:
> + rm -f ebizzy Makefile
> +EOF
> +
> +echo "Type 'make' to compile"
> +
> diff -uprN ltp_orig/utils/benchmark/ebizzy-0.3/ebizzy.c ltp/utils/benchmark/ebizzy-0.3/ebizzy.c
> --- ltp_orig/utils/benchmark/ebizzy-0.3/ebizzy.c 1969-12-31 18:00:00.000000000 -0600
> +++ ltp/utils/benchmark/ebizzy-0.3/ebizzy.c 2009-03-19 12:50:06.000000000 -0500
> @@ -0,0 +1,536 @@
> +/*
> + * Ebizzy - replicate a large ebusiness type of workload.
> + *
> + * Written by Valerie Henson <val@nmt.edu>
> + *
> + * Copyright 2006 - 2007 Intel Corporation
> + * Copyright 2007 Valerie Henson <val@nmt.edu>
> + *
> + * Rodrigo Rubira Branco <rrbranco@br.ibm.com> - HP/BSD/Solaris port and some
> + * new features
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
> + * USA
> + *
> + */
> +
> +/*
> + * This program is designed to replicate a common web search app
> + * workload. A lot of search applications have the basic pattern: Get
> + * a request to find a certain record, index into the chunk of memory
> + * that contains it, copy it into another chunk, then look it up via
> + * binary search. The interesting parts of this workload are:
> + *
> + * Large working set
> + * Data alloc/copy/free cycle
> + * Unpredictable data access patterns
> + *
> + * Fiddle with the command line options until you get something
> + * resembling the kind of workload you want to investigate.
> + *
> + */
> +
> +#include <stdio.h>
> +#include <unistd.h>
> +#include <stdlib.h>
> +#include <sys/mman.h>
> +#include <pthread.h>
> +#include <string.h>
> +#include <time.h>
> +#include <sys/time.h>
> +#include <sys/resource.h>
> +
> +#include "ebizzy.h"
> +
> +/*
> + * Command line options
> + */
> +
> +static unsigned int always_mmap;
> +static unsigned int never_mmap;
> +static unsigned int chunks;
> +static unsigned int use_permissions;
> +static unsigned int use_holes;
> +static unsigned int random_size;
> +static unsigned int chunk_size;
> +static unsigned int seconds;
> +static unsigned int threads;
> +static unsigned int verbose;
> +static unsigned int linear;
> +static unsigned int touch_pages;
> +static unsigned int no_lib_memcpy;
> +
> +/*
> + * Other global variables
> + */
> +
> +typedef size_t record_t;
> +static unsigned int record_size = sizeof (record_t);
> +static char *cmd;
> +static record_t **mem;
> +static char **hole_mem;
> +static unsigned int page_size;
> +static time_t start_time;
> +static volatile int threads_go;
> +static unsigned int records_read;
> +
> +static void
> +usage(void)
> +{
> + fprintf(stderr, "Usage: %s [options]\n"
> + "-T\t\t Just 'touch' the allocated pages\n"
> + "-l\t\t Don't use library memcpy\n"
> + "-m\t\t Always use mmap instead of malloc\n"
> + "-M\t\t Never use mmap\n"
> + "-n <num>\t Number of memory chunks to allocate\n"
> + "-p \t\t Prevent mmap coalescing using permissions\n"
> + "-P \t\t Prevent mmap coalescing using holes\n"
> + "-R\t\t Randomize size of memory to copy and search\n"
> + "-s <size>\t Size of memory chunks, in bytes\n"
> + "-S <seconds>\t Number of seconds to run\n"
> + "-t <num>\t Number of threads (2 * number cpus by default)\n"
> + "-v[v[v]]\t Be verbose (more v's for more verbose)\n"
> + "-z\t\t Linear search instead of binary search\n",
> + cmd);
> + exit(1);
> +}
> +
> +/*
> + * Read options, check them, and set some defaults.
> + */
> +
> +static void
> +read_options(int argc, char *argv[])
> +{
> + int c;
> +
> + page_size = getpagesize();
> +
> + /*
> + * Set some defaults. These are currently tuned to run in a
> + * reasonable amount of time on my laptop.
> + *
> + * We could set the static defaults in the declarations, but
> + * then the defaults would be split between here and the top
> + * of the file, which is annoying.
> + */
> + threads = 2 * sysconf(_SC_NPROCESSORS_ONLN);
> + chunks = 10;
> + chunk_size = record_size * 64 * 1024;
> + seconds = 10;
> +
> + /* On to option processing */
> +
> + cmd = argv[0];
> + opterr = 1;
> +
> + while ((c = getopt(argc, argv, "lmMn:pPRs:S:t:vzT")) != -1) {
> + switch (c) {
> + case 'l':
> + no_lib_memcpy = 1;
> + break;
> + case 'm':
> + always_mmap = 1;
> + break;
> + case 'M':
> + never_mmap = 1;
> + break;
> + case 'n':
> + chunks = atoi(optarg);
> + if (chunks == 0)
> + usage();
> + break;
> + case 'p':
> + use_permissions = 1;
> + break;
> + case 'P':
> + use_holes = 1;
> + break;
> + case 'R':
> + random_size = 1;
> + break;
> + case 's':
> + chunk_size = atoi(optarg);
> + if (chunk_size == 0)
> + usage();
> + break;
> + case 'S':
> + seconds = atoi(optarg);
> + if (seconds == 0)
> + usage();
> + break;
> + case 't':
> + threads = atoi(optarg);
> + if (threads == 0)
> + usage();
> + break;
> + case 'T':
> + touch_pages = 1;
> + break;
> + case 'v':
> + verbose++;
> + break;
> + case 'z':
> + linear = 1;
> + break;
> + default:
> + usage();
> + }
> + }
> +
> + if (verbose)
> + printf("ebizzy 0.2\n"
> + "(C) 2006-7 Intel Corporation\n"
> + "(C) 2007 Valerie Henson <val@nmt.edu>\n");
> +
> + if (verbose) {
> + printf("always_mmap %u\n", always_mmap);
> + printf("never_mmap %u\n", never_mmap);
> + printf("chunks %u\n", chunks);
> + printf("prevent coalescing using permissions %u\n",
> + use_permissions);
> + printf("prevent coalescing using holes %u\n", use_holes);
> + printf("random_size %u\n", random_size);
> + printf("chunk_size %u\n", chunk_size);
> + printf("seconds %d\n", seconds);
> + printf("threads %u\n", threads);
> + printf("verbose %u\n", verbose);
> + printf("linear %u\n", linear);
> + printf("touch_pages %u\n", touch_pages);
> + printf("page size %d\n", page_size);
> + }
> +
> + /* Check for incompatible options */
> +
> + if (always_mmap && never_mmap) {
> + fprintf(stderr, "Both -m \"always mmap\" and -M "
> + "\"never mmap\" option specified\n");
> + usage();
> + }
> +
> + if (never_mmap)
> + mallopt(M_MMAP_MAX, 0);
> +
> + if (chunk_size < record_size) {
> + fprintf(stderr, "Chunk size %u smaller than record size %u\n",
> + chunk_size, record_size);
> + usage();
> + }
> +}
> +
> +static void
> +touch_mem(char *dest, size_t size)
> +{
> + int i;
> + if (touch_pages) {
> + for (i = 0; i < size; i += page_size)
> + *(dest + i) = 0xff;
> + }
> +}
> +
> +static void *
> +alloc_mem(size_t size)
> +{
> + char *p;
> + int err = 0;
> +
> + if (always_mmap) {
> + p = mmap((void *) 0, size, (PROT_READ | PROT_WRITE),
> + (MAP_PRIVATE | MAP_ANONYMOUS), -1, 0);
> + if (p == MAP_FAILED)
> + err = 1;
> + } else {
> + p = malloc(size);
> + if (p == NULL)
> + err = 1;
> + }
> +
> + if (err) {
> + fprintf(stderr, "Couldn't allocate %zu bytes, try smaller "
> + "chunks or size options\n"
> + "Using -n %u chunks and -s %u size\n",
> + size, chunks, chunk_size);
> + exit(1);
> + }
> +
> + return (p);
> +}
> +
> +static void
> +free_mem(void *p, size_t size)
> +{
> + if (always_mmap)
> + munmap(p, size);
> + else
> + free(p);
> +}
> +
> +/*
> + * Factor out differences in memcpy implementation by optionally using
> + * our own simple memcpy implementation.
> + */
> +
> +static void
> +my_memcpy(void *dest, void *src, size_t len)
> +{
> + char *d = (char *) dest;
> + char *s = (char *) src;
> + int i;
> +
> + for (i = 0; i < len; i++)
> + d[i] = s[i];
> + return;
> +}
> +
> +static void
> +allocate(void)
> +{
> + int i;
> +
> + mem = alloc_mem(chunks * sizeof (record_t *));
> +
> + if (use_holes)
> + hole_mem = alloc_mem(chunks * sizeof (record_t *));
> +
> +
> + for (i = 0; i < chunks; i++) {
> + mem[i] = (record_t *) alloc_mem(chunk_size);
> + /* Prevent coalescing using holes */
> + if (use_holes)
> + hole_mem[i] = alloc_mem(page_size);
> + }
> +
> + /* Free hole memory */
> + if (use_holes)
> + for (i = 0; i < chunks; i++)
> + free_mem(hole_mem[i], page_size);
> +
> + if (verbose)
> + printf("Allocated memory\n");
> +}
> +
> +static void
> +write_pattern(void)
> +{
> + int i, j;
> +
> + for (i = 0; i < chunks; i++) {
> + for(j = 0; j < chunk_size / record_size; j++)
> + mem[i][j] = (record_t) j;
> + /* Prevent coalescing by alternating permissions */
> + if (use_permissions && (i % 2) == 0)
> + mprotect((void *) mem[i], chunk_size, PROT_READ);
> + }
> + if (verbose)
> + printf("Wrote memory\n");
> +}
> +
> +static void *
> +linear_search(record_t key, record_t *base, size_t size)
> +{
> + record_t *p;
> + record_t *end = base + (size / record_size);
> +
> + for(p = base; p < end; p++)
> + if (*p == key)
> + return p;
> + return NULL;
> +}
> +
> +static int
> +compare(const void *p1, const void *p2)
> +{
> + return (* (record_t *) p1 - * (record_t *) p2);
> +}
> +
> +/*
> + * Stupid ranged random number function. We don't care about quality.
> + *
> + * Inline because it's starting to be a scaling issue.
> + */
> +
> +static inline unsigned int
> +rand_num(unsigned int max, unsigned int state)
> +{
> + state = state * 1103515245 + 12345;
> + return ((state/65536) % max);
> +}
> +
> +/*
> + * This function is the meat of the program; the rest is just support.
> + *
> + * In this function, we randomly select a memory chunk, copy it into a
> + * newly allocated buffer, randomly select a search key, look it up,
> + * then free the memory. An option tells us to allocate and copy a
> + * randomly sized chunk of the memory instead of the whole thing.
> + *
> + * Linear search provided for sanity checking.
> + *
> + */
> +
> +static unsigned int
> +search_mem(void)
> +{
> + record_t key, *found;
> + record_t *src, *copy;
> + unsigned int chunk;
> + size_t copy_size = chunk_size;
> + unsigned int i;
> + unsigned int state;
> +
> + for (i = 0; threads_go == 1; i++) {
> + chunk = rand_num(chunks, state);
> + src = mem[chunk];
> + /*
> + * If we're doing random sizes, we need a non-zero
> + * multiple of record size.
> + */
> + if (random_size)
> + copy_size = (rand_num(chunk_size / record_size, state)
> + + 1) * record_size;
> + copy = alloc_mem(copy_size);
> +
> + if ( touch_pages ) {
> + touch_mem((char *) copy, copy_size);
> + } else {
> +
> + if (no_lib_memcpy)
> + my_memcpy(copy, src, copy_size);
> + else
> + memcpy(copy, src, copy_size);
> +
> + key = rand_num(copy_size / record_size, state);
> +
> + if (verbose > 2)
> + printf("Search key %zu, copy size %zu\n", key, copy_size);
> + if (linear)
> + found = linear_search(key, copy, copy_size);
> + else
> + found = bsearch(&key, copy, copy_size / record_size,
> + record_size, compare);
> +
> + /* Below check is mainly for memory corruption or other bug */
> + if (found == NULL) {
> + fprintf(stderr, "Couldn't find key %zd\n", key);
> + exit(1);
> + }
> + } /* end if ! touch_pages */
> +
> + free_mem(copy, copy_size);
> + }
> +
> + return (i);
> +}
> +
> +static void *
> +thread_run(void *arg)
> +{
> +
> + if (verbose > 1)
> + printf("Thread started\n");
> +
> + /* Wait for the start signal */
> +
> + while (threads_go == 0);
> +
> + records_read += search_mem();
> +
> + if (verbose > 1)
> + printf("Thread finished, %f seconds\n",
> + difftime(time(NULL), start_time));
> +
> + return NULL;
> +}
> +
> +static struct timeval
> +difftimeval(struct timeval *end, struct timeval *start)
> +{
> + struct timeval diff;
> + diff.tv_sec = end->tv_sec - start->tv_sec;
> + diff.tv_usec = end->tv_usec - start->tv_usec;
> + return diff;
> +}
> +
> +static void
> +start_threads(void)
> +{
> + pthread_t thread_array[threads];
> + double elapsed;
> + unsigned int i;
> + struct rusage start_ru, end_ru;
> + struct timeval usr_time, sys_time;
> + int err;
> +
> + if (verbose)
> + printf("Threads starting\n");
> +
> + for (i = 0; i < threads; i++) {
> + err = pthread_create(&thread_array[i], NULL, thread_run, NULL);
> + if (err) {
> + fprintf(stderr, "Error creating thread %d\n", i);
> + exit(1);
> + }
> + }
> +
> + /*
> + * Begin accounting - this is when we actually do the things
> + * we want to measure. */
> +
> + getrusage(RUSAGE_SELF, &start_ru);
> + start_time = time(NULL);
> + threads_go = 1;
> + sleep(seconds);
> + threads_go = 0;
> + elapsed = difftime(time(NULL), start_time);
> + getrusage(RUSAGE_SELF, &end_ru);
> +
> + /*
> + * The rest is just clean up.
> + */
> +
> + for (i = 0; i < threads; i++) {
> + err = pthread_join(thread_array[i], NULL);
> + if (err) {
> + fprintf(stderr, "Error joining thread %d\n", i);
> + exit(1);
> + }
> + }
> +
> + if (verbose)
> + printf("Threads finished\n");
> +
> + printf("%u records/s\n",
> + (unsigned int) (((double) records_read)/elapsed));
> +
> + usr_time = difftimeval(&end_ru.ru_utime, &start_ru.ru_utime);
> + sys_time = difftimeval(&end_ru.ru_stime, &start_ru.ru_stime);
> +
> + printf("real %5.2f s\n", elapsed);
> + printf("user %5.2f s\n", usr_time.tv_sec + usr_time.tv_usec/1e6);
> + printf("sys %5.2f s\n", sys_time.tv_sec + sys_time.tv_usec/1e6);
> +}
> +
> +int
> +main(int argc, char *argv[])
> +{
> + read_options(argc, argv);
> +
> + allocate();
> +
> + write_pattern();
> +
> + start_threads();
> +
> + return 0;
> +}
> diff -uprN ltp_orig/utils/benchmark/ebizzy-0.3/ebizzy.h ltp/utils/benchmark/ebizzy-0.3/ebizzy.h
> --- ltp_orig/utils/benchmark/ebizzy-0.3/ebizzy.h 1969-12-31 18:00:00.000000000 -0600
> +++ ltp/utils/benchmark/ebizzy-0.3/ebizzy.h 2009-03-19 12:50:06.000000000 -0500
> @@ -0,0 +1,34 @@
> +/* Portability stuff */
> +
> +#ifndef EBIZZY_H
> +#define EBIZZY_H
> +
> +#ifndef _freebsd
> +#include <malloc.h>
> +#endif
> +
> +/*
> + * Solaris and FreeBSD compatibility stuff
> + */
> +#if defined(_solaris) || defined(_freebsd)
> +#define MAP_ANONYMOUS MAP_ANON
> +#define M_MMAP_MAX (-4)
> +#endif
> +
> +/*
> + * FreeBSD compatibility stuff
> + */
> +#ifdef _freebsd
> +#define mallopt(arg1, arg2) do { } while(0);
> +#endif
> +
> +/*
> + * HP-UX compatibility stuff
> + */
> +#ifdef _HPUX_SOURCE
> +#define _SC_NPROCESSORS_ONLN pthread_num_processors_np()
> +#endif
> +
> +
> +
> +#endif /* EBIZZY_H */
> diff -uprN ltp_orig/utils/benchmark/ebizzy-0.3/LICENSE ltp/utils/benchmark/ebizzy-0.3/LICENSE
> --- ltp_orig/utils/benchmark/ebizzy-0.3/LICENSE 1969-12-31 18:00:00.000000000 -0600
> +++ ltp/utils/benchmark/ebizzy-0.3/LICENSE 2009-03-19 12:50:06.000000000 -0500
> @@ -0,0 +1,340 @@
> + GNU GENERAL PUBLIC LICENSE
> + Version 2, June 1991
> +
> + Copyright (C) 1989, 1991 Free Software Foundation, Inc.
> + 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> + Everyone is permitted to copy and distribute verbatim copies
> + of this license document, but changing it is not allowed.
> +
> + Preamble
> +
> + The licenses for most software are designed to take away your
> +freedom to share and change it. By contrast, the GNU General Public
> +License is intended to guarantee your freedom to share and change free
> +software--to make sure the software is free for all its users. This
> +General Public License applies to most of the Free Software
> +Foundation's software and to any other program whose authors commit to
> +using it. (Some other Free Software Foundation software is covered by
> +the GNU Library General Public License instead.) You can apply it to
> +your programs, too.
> +
> + When we speak of free software, we are referring to freedom, not
> +price. Our General Public Licenses are designed to make sure that you
> +have the freedom to distribute copies of free software (and charge for
> +this service if you wish), that you receive source code or can get it
> +if you want it, that you can change the software or use pieces of it
> +in new free programs; and that you know you can do these things.
> +
> + To protect your rights, we need to make restrictions that forbid
> +anyone to deny you these rights or to ask you to surrender the rights.
> +These restrictions translate to certain responsibilities for you if you
> +distribute copies of the software, or if you modify it.
> +
> + For example, if you distribute copies of such a program, whether
> +gratis or for a fee, you must give the recipients all the rights that
> +you have. You must make sure that they, too, receive or can get the
> +source code. And you must show them these terms so they know their
> +rights.
> +
> + We protect your rights with two steps: (1) copyright the software, and
> +(2) offer you this license which gives you legal permission to copy,
> +distribute and/or modify the software.
> +
> + Also, for each author's protection and ours, we want to make certain
> +that everyone understands that there is no warranty for this free
> +software. If the software is modified by someone else and passed on, we
> +want its recipients to know that what they have is not the original, so
> +that any problems introduced by others will not reflect on the original
> +authors' reputations.
> +
> + Finally, any free program is threatened constantly by software
> +patents. We wish to avoid the danger that redistributors of a free
> +program will individually obtain patent licenses, in effect making the
> +program proprietary. To prevent this, we have made it clear that any
> +patent must be licensed for everyone's free use or not licensed at all.
> +
> + The precise terms and conditions for copying, distribution and
> +modification follow.
> +
> + GNU GENERAL PUBLIC LICENSE
> + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
> +
> + 0. This License applies to any program or other work which contains
> +a notice placed by the copyright holder saying it may be distributed
> +under the terms of this General Public License. The "Program", below,
> +refers to any such program or work, and a "work based on the Program"
> +means either the Program or any derivative work under copyright law:
> +that is to say, a work containing the Program or a portion of it,
> +either verbatim or with modifications and/or translated into another
> +language. (Hereinafter, translation is included without limitation in
> +the term "modification".) Each licensee is addressed as "you".
> +
> +Activities other than copying, distribution and modification are not
> +covered by this License; they are outside its scope. The act of
> +running the Program is not restricted, and the output from the Program
> +is covered only if its contents constitute a work based on the
> +Program (independent of having been made by running the Program).
> +Whether that is true depends on what the Program does.
> +
> + 1. You may copy and distribute verbatim copies of the Program's
> +source code as you receive it, in any medium, provided that you
> +conspicuously and appropriately publish on each copy an appropriate
> +copyright notice and disclaimer of warranty; keep intact all the
> +notices that refer to this License and to the absence of any warranty;
> +and give any other recipients of the Program a copy of this License
> +along with the Program.
> +
> +You may charge a fee for the physical act of transferring a copy, and
> +you may at your option offer warranty protection in exchange for a fee.
> +
> + 2. You may modify your copy or copies of the Program or any portion
> +of it, thus forming a work based on the Program, and copy and
> +distribute such modifications or work under the terms of Section 1
> +above, provided that you also meet all of these conditions:
> +
> + a) You must cause the modified files to carry prominent notices
> + stating that you changed the files and the date of any change.
> +
> + b) You must cause any work that you distribute or publish, that in
> + whole or in part contains or is derived from the Program or any
> + part thereof, to be licensed as a whole at no charge to all third
> + parties under the terms of this License.
> +
> + c) If the modified program normally reads commands interactively
> + when run, you must cause it, when started running for such
> + interactive use in the most ordinary way, to print or display an
> + announcement including an appropriate copyright notice and a
> + notice that there is no warranty (or else, saying that you provide
> + a warranty) and that users may redistribute the program under
> + these conditions, and telling the user how to view a copy of this
> + License. (Exception: if the Program itself is interactive but
> + does not normally print such an announcement, your work based on
> + the Program is not required to print an announcement.)
> +
> +These requirements apply to the modified work as a whole. If
> +identifiable sections of that work are not derived from the Program,
> +and can be reasonably considered independent and separate works in
> +themselves, then this License, and its terms, do not apply to those
> +sections when you distribute them as separate works. But when you
> +distribute the same sections as part of a whole which is a work based
> +on the Program, the distribution of the whole must be on the terms of
> +this License, whose permissions for other licensees extend to the
> +entire whole, and thus to each and every part regardless of who wrote it.
> +
> +Thus, it is not the intent of this section to claim rights or contest
> +your rights to work written entirely by you; rather, the intent is to
> +exercise the right to control the distribution of derivative or
> +collective works based on the Program.
> +
> +In addition, mere aggregation of another work not based on the Program
> +with the Program (or with a work based on the Program) on a volume of
> +a storage or distribution medium does not bring the other work under
> +the scope of this License.
> +
> + 3. You may copy and distribute the Program (or a work based on it,
> +under Section 2) in object code or executable form under the terms of
> +Sections 1 and 2 above provided that you also do one of the following:
> +
> + a) Accompany it with the complete corresponding machine-readable
> + source code, which must be distributed under the terms of Sections
> + 1 and 2 above on a medium customarily used for software interchange; or,
> +
> + b) Accompany it with a written offer, valid for at least three
> + years, to give any third party, for a charge no more than your
> + cost of physically performing source distribution, a complete
> + machine-readable copy of the corresponding source code, to be
> + distributed under the terms of Sections 1 and 2 above on a medium
> + customarily used for software interchange; or,
> +
> + c) Accompany it with the information you received as to the offer
> + to distribute corresponding source code. (This alternative is
> + allowed only for noncommercial distribution and only if you
> + received the program in object code or executable form with such
> + an offer, in accord with Subsection b above.)
> +
> +The source code for a work means the preferred form of the work for
> +making modifications to it. For an executable work, complete source
> +code means all the source code for all modules it contains, plus any
> +associated interface definition files, plus the scripts used to
> +control compilation and installation of the executable. However, as a
> +special exception, the source code distributed need not include
> +anything that is normally distributed (in either source or binary
> +form) with the major components (compiler, kernel, and so on) of the
> +operating system on which the executable runs, unless that component
> +itself accompanies the executable.
> +
> +If distribution of executable or object code is made by offering
> +access to copy from a designated place, then offering equivalent
> +access to copy the source code from the same place counts as
> +distribution of the source code, even though third parties are not
> +compelled to copy the source along with the object code.
> +
> + 4. You may not copy, modify, sublicense, or distribute the Program
> +except as expressly provided under this License. Any attempt
> +otherwise to copy, modify, sublicense or distribute the Program is
> +void, and will automatically terminate your rights under this License.
> +However, parties who have received copies, or rights, from you under
> +this License will not have their licenses terminated so long as such
> +parties remain in full compliance.
> +
> + 5. You are not required to accept this License, since you have not
> +signed it. However, nothing else grants you permission to modify or
> +distribute the Program or its derivative works. These actions are
> +prohibited by law if you do not accept this License. Therefore, by
> +modifying or distributing the Program (or any work based on the
> +Program), you indicate your acceptance of this License to do so, and
> +all its terms and conditions for copying, distributing or modifying
> +the Program or works based on it.
> +
> + 6. Each time you redistribute the Program (or any work based on the
> +Program), the recipient automatically receives a license from the
> +original licensor to copy, distribute or modify the Program subject to
> +these terms and conditions. You may not impose any further
> +restrictions on the recipients' exercise of the rights granted herein.
> +You are not responsible for enforcing compliance by third parties to
> +this License.
> +
> + 7. If, as a consequence of a court judgment or allegation of patent
> +infringement or for any other reason (not limited to patent issues),
> +conditions are imposed on you (whether by court order, agreement or
> +otherwise) that contradict the conditions of this License, they do not
> +excuse you from the conditions of this License. If you cannot
> +distribute so as to satisfy simultaneously your obligations under this
> +License and any other pertinent obligations, then as a consequence you
> +may not distribute the Program at all. For example, if a patent
> +license would not permit royalty-free redistribution of the Program by
> +all those who receive copies directly or indirectly through you, then
> +the only way you could satisfy both it and this License would be to
> +refrain entirely from distribution of the Program.
> +
> +If any portion of this section is held invalid or unenforceable under
> +any particular circumstance, the balance of the section is intended to
> +apply and the section as a whole is intended to apply in other
> +circumstances.
> +
> +It is not the purpose of this section to induce you to infringe any
> +patents or other property right claims or to contest validity of any
> +such claims; this section has the sole purpose of protecting the
> +integrity of the free software distribution system, which is
> +implemented by public license practices. Many people have made
> +generous contributions to the wide range of software distributed
> +through that system in reliance on consistent application of that
> +system; it is up to the author/donor to decide if he or she is willing
> +to distribute software through any other system and a licensee cannot
> +impose that choice.
> +
> +This section is intended to make thoroughly clear what is believed to
> +be a consequence of the rest of this License.
> +
> + 8. If the distribution and/or use of the Program is restricted in
> +certain countries either by patents or by copyrighted interfaces, the
> +original copyright holder who places the Program under this License
> +may add an explicit geographical distribution limitation excluding
> +those countries, so that distribution is permitted only in or among
> +countries not thus excluded. In such case, this License incorporates
> +the limitation as if written in the body of this License.
> +
> + 9. The Free Software Foundation may publish revised and/or new versions
> +of the General Public License from time to time. Such new versions will
> +be similar in spirit to the present version, but may differ in detail to
> +address new problems or concerns.
> +
> +Each version is given a distinguishing version number. If the Program
> +specifies a version number of this License which applies to it and "any
> +later version", you have the option of following the terms and conditions
> +either of that version or of any later version published by the Free
> +Software Foundation. If the Program does not specify a version number of
> +this License, you may choose any version ever published by the Free Software
> +Foundation.
> +
> + 10. If you wish to incorporate parts of the Program into other free
> +programs whose distribution conditions are different, write to the author
> +to ask for permission. For software which is copyrighted by the Free
> +Software Foundation, write to the Free Software Foundation; we sometimes
> +make exceptions for this. Our decision will be guided by the two goals
> +of preserving the free status of all derivatives of our free software and
> +of promoting the sharing and reuse of software generally.
> +
> + NO WARRANTY
> +
> + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
> +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
> +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
> +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
> +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
> +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
> +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
> +REPAIR OR CORRECTION.
> +
> + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
> +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
> +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
> +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
> +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
> +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
> +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
> +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
> +POSSIBILITY OF SUCH DAMAGES.
> +
> + END OF TERMS AND CONDITIONS
> +
> + How to Apply These Terms to Your New Programs
> +
> + If you develop a new program, and you want it to be of the greatest
> +possible use to the public, the best way to achieve this is to make it
> +free software which everyone can redistribute and change under these terms.
> +
> + To do so, attach the following notices to the program. It is safest
> +to attach them to the start of each source file to most effectively
> +convey the exclusion of warranty; and each file should have at least
> +the "copyright" line and a pointer to where the full notice is found.
> +
> + <one line to give the program's name and a brief idea of what it does.>
> + Copyright (C) <year> <name of author>
> +
> + This program is free software; you can redistribute it and/or modify
> + it under the terms of the GNU General Public License as published by
> + the Free Software Foundation; either version 2 of the License, or
> + (at your option) any later version.
> +
> + This program is distributed in the hope that it will be useful,
> + but WITHOUT ANY WARRANTY; without even the implied warranty of
> + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + GNU General Public License for more details.
> +
> + You should have received a copy of the GNU General Public License
> + along with this program; if not, write to the Free Software
> + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +
> +
> +Also add information on how to contact you by electronic and paper mail.
> +
> +If the program is interactive, make it output a short notice like this
> +when it starts in an interactive mode:
> +
> + Gnomovision version 69, Copyright (C) year name of author
> + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
> + This is free software, and you are welcome to redistribute it
> + under certain conditions; type `show c' for details.
> +
> +The hypothetical commands `show w' and `show c' should show the appropriate
> +parts of the General Public License. Of course, the commands you use may
> +be called something other than `show w' and `show c'; they could even be
> +mouse-clicks or menu items--whatever suits your program.
> +
> +You should also get your employer (if you work as a programmer) or your
> +school, if any, to sign a "copyright disclaimer" for the program, if
> +necessary. Here is a sample; alter the names:
> +
> + Yoyodyne, Inc., hereby disclaims all copyright interest in the program
> + `Gnomovision' (which makes passes at compilers) written by James Hacker.
> +
> + <signature of Ty Coon>, 1 April 1989
> + Ty Coon, President of Vice
> +
> +This General Public License does not permit incorporating your program into
> +proprietary programs. If your program is a subroutine library, you may
> +consider it more useful to permit linking proprietary applications with the
> +library. If this is what you want to do, use the GNU Library General
> +Public License instead of this License.
> diff -uprN ltp_orig/utils/benchmark/ebizzy-0.3/Makefile ltp/utils/benchmark/ebizzy-0.3/Makefile
> --- ltp_orig/utils/benchmark/ebizzy-0.3/Makefile 1969-12-31 18:00:00.000000000 -0600
> +++ ltp/utils/benchmark/ebizzy-0.3/Makefile 2009-03-19 12:50:06.000000000 -0500
> @@ -0,0 +1,8 @@
> +all: ebizzy
> +
> +configure:
> + ./configure
> +ebizzy: configure
> + gcc -Wall -Wshadow -lpthread -o ebizzy ebizzy.c
> +clean:
> + rm -f ebizzy *~
> diff -uprN ltp_orig/utils/benchmark/ebizzy-0.3/README ltp/utils/benchmark/ebizzy-0.3/README
> --- ltp_orig/utils/benchmark/ebizzy-0.3/README 1969-12-31 18:00:00.000000000 -0600
> +++ ltp/utils/benchmark/ebizzy-0.3/README 2009-03-19 12:50:06.000000000 -0500
> @@ -0,0 +1,62 @@
> +ebizzy
> +------
> +
> +ebizzy is designed to generate a workload resembling common web
> +application server workloads. It is highly threaded, has a large
> +in-memory working set with low locality, and allocates and deallocates
> +memory frequently. When running most efficiently, it will max out the
> +CPU.
> +
> +Compiling
> +---------
> +
> +First configure ebizzy for your platform by typing "./configure".
> +Currently Linux and Solaris anre supported. Then type "make". The
> +resulting binary will be named "ebizzy".
> +
> +Running
> +-------
> +
> +ebizzy does not require any command line arguments. To get
> +results, just run it:
> +
> +$ ./ebizzy
> +2569 records/s
> +real 10.00 s
> +user 2.74 s
> +sys 7.24 s
> +
> +The records per second rate should be as high as possible, and the
> +system time as low as possible. Play with the various options to try
> +to increase this time to see where overhead is coming from. Note that
> +the default number of threads is 2 per number of cpus.
> +
> +An interesting part of this app is difference between memory
> +allocation using the "always mmap" and "never mmap" flags. -m is
> +"always mmap" and -M is "never mmap":
> +
> +$ ./ebizzy -M
> +3997 records/s
> +real 10.00 s
> +user 3.70 s
> +sys 5.65 s
> +$ ./ebizzy -m
> +2577 records/s
> +real 10.00 s
> +user 2.40 s
> +sys 7.43 s
> +
> +The output of the above two commands should be quite different.
> +
> +ebizzy has many command line arguments. To get a list of them and
> +their descriptions, type:
> +
> +$ ./ebizzy -?
> +
> +Support
> +-------
> +
> +There is none. However, you can try emailing the author with
> +questions and suggestions.
> +
> +Val Henson <val@nmt.edu>
> diff -uprN ltp_orig/utils/benchmark/Makefile ltp/utils/benchmark/Makefile
> --- ltp_orig/utils/benchmark/Makefile 2009-03-19 02:02:13.000000000 -0500
> +++ ltp/utils/benchmark/Makefile 2009-03-19 12:50:06.000000000 -0500
> @@ -18,15 +18,15 @@
> ####
> ################################################################################
>
> -SUBDIRS := ebizzy-0.2
> +SUBDIRS := ebizzy-0.3
>
> configure:
> - @set -e; for i in $(SUBDIRS); do $(MAKE) -C $$i $@; done;
> + @set -e; for i in $(SUBDIRS); do $(MAKE) -C $$i $@; done;
>
> all: configure
> - @set -e; for i in $(SUBDIRS); do $(MAKE) -C $$i $@; done;
> + @set -e; for i in $(SUBDIRS); do $(MAKE) -C $$i $@; done;
>
> install:
>
> clean:
> - @set -e; for i in $(SUBDIRS); do $(MAKE) -C $$i $@; done;
> + @set -e; for i in $(SUBDIRS); do $(MAKE) -C $$i $@; done;
> diff -uprN ltp_orig/utils/Makefile ltp/utils/Makefile
> --- ltp_orig/utils/Makefile 2009-03-19 02:02:13.000000000 -0500
> +++ ltp/utils/Makefile 2009-03-19 12:50:06.000000000 -0500
> @@ -21,12 +21,12 @@
> SUBDIRS := benchmark
>
> configure:
> - @set -e; for i in $(SUBDIRS); do $(MAKE) -C $$i $@; done;
> + @set -e; for i in $(SUBDIRS); do $(MAKE) -C $$i $@; done;
>
> all: configure
> - @set -e; for i in $(SUBDIRS); do $(MAKE) -C $$i $@; done;
> + @set -e; for i in $(SUBDIRS); do $(MAKE) -C $$i $@; done;
>
> install:
>
> clean:
> - @set -e; for i in $(SUBDIRS); do $(MAKE) -C $$i $@; done;
> + @set -e; for i in $(SUBDIRS); do $(MAKE) -C $$i $@; done;
>
> ------------------------------------------------------------------------------
> Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
> powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
> easily build your RIAs with Flex Builder, the Eclipse(TM)based development
> software that enables intelligent coding and step-through debugging.
> Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
> _______________________________________________
> Ltp-list mailing list
> Ltp-list@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/ltp-list
["config-2.6.27.19-5-default" (config-2.6.27.19-5-default)]
#
# Automatically generated make config: don't edit
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT2
CONFIG_LOCALVERSION="-5-default"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SUSE_KERNEL=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_MM_OWNER=y
CONFIG_CGROUP_MEM_RES_CTLR=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_PROC_PID_CPUSET=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_TRACEPOINTS is not set
CONFIG_MARKERS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_USE_GENERIC_SMP_HELPERS=y
# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
# CONFIG_UTRACE is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_LSF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_PC is not set
# CONFIG_X86_XEN is not set
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
CONFIG_X86_GENERICARCH=y
# CONFIG_X86_NUMAQ is not set
CONFIG_X86_SUMMIT=y
CONFIG_X86_ES7000=y
CONFIG_X86_BIGSMP=y
# CONFIG_X86_64_XEN is not set
# CONFIG_X86_VSMP is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_MEMTEST=y
CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
CONFIG_M586=y
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_F00F_BUG=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS2
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
#
# NUMA (Summit) requires SMP, 64GB highmem support, ACPI
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_HIGHPTE=y
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
# CONFIG_EFI is not set
# CONFIG_IRQBALANCE is not set
CONFIG_SECCOMP=y
# CONFIG_SECCOMP_DISABLE_TSC is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ%0
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
#
# Hardware Performance Monitoring support
#
CONFIG_PERFMON=y
# CONFIG_PERFMON_DEBUG is not set
CONFIG_PERFMON_DEBUG_FS=y
CONFIG_X86_PERFMON_P6=m
CONFIG_X86_PERFMON_P4=m
CONFIG_X86_PERFMON_PEBS_P4=m
CONFIG_X86_PERFMON_CORE=m
CONFIG_X86_PERFMON_PEBS_CORE=m
CONFIG_X86_PERFMON_INTEL_ATOM=m
CONFIG_X86_PERFMON_INTEL_ARCH=m
CONFIG_X86_PERFMON_AMD64=m
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_WMI=m
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_CUSTOM_DSDT_INITRD=y
CONFIG_ACPI_BLACKLIST_YEAR 01
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_PCI_SLOT=m
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m
CONFIG_X86_APM_BOOT=y
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
# CONFIG_APM_CPU_IDLE is not set
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_ALLOW_INTS=y
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K6=m
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
CONFIG_X86_GX_SUSPMOD=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_CPUFREQ_NFORCE2=m
CONFIG_X86_LONGRUN=m
CONFIG_X86_LONGHAUL=m
CONFIG_X86_E_POWERSAVER=m
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
# CONFIG_PCI_GOXEN_FE is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_OLPC=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=m
CONFIG_OLPC=y
CONFIG_K8_NB=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_COMPAQ=m
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
CONFIG_HOTPLUG_PCI_IBM=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CONNTRACK_SLP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_IPV4OPTIONS=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO0
CONFIG_IP_DCCP_TFRC_LIB=m
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
CONFIG_COPS=m
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
# CONFIG_ECONET_AUNUDP is not set
# CONFIG_ECONET_NATIVE is not set
CONFIG_WAN_ROUTER=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=m
CONFIG_DCBNL=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_SCC=m
CONFIG_SCC_DELAY=y
CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_DEBUG_DEVICES is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y
CONFIG_NET_9P=m
# CONFIG_NET_9P_VIRTIO is not set
# CONFIG_NET_9P_DEBUG is not set
CONFIG_NETVM=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_AR7_PARTS=m
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
CONFIG_RFD_FTL=m
# CONFIG_SSFDC is not set
CONFIG_MTD_OOPS=m
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_SCx200_DOCFLASH=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_DILNETPC=m
CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=m
CONFIG_MTD_INTEL_VR_NOR=m
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
CONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE@96
CONFIG_MTDRAM_ERASE_SIZE8
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ALAUDA=m
CONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=m
#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD@96
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_XD=m
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT
CONFIG_BLK_DEV_RAM_SIZEd000
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
CONFIG_CIPHER_TWOFISH=m
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
CONFIG_EEPROM_93CX6=m
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ACER_WMI=m
CONFIG_ASUS_LAPTOP=m
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_TC1100_WMI=m
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUG is not set
CONFIG_THINKPAD_ACPI_BAY=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_INTEL_MENLOW=m
CONFIG_EEEPC_LAPTOP=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HP_ILO=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=m
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_DELKIN=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_PLATFORM=m
CONFIG_BLK_DEV_CMD640=m
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=m
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_CS5535=m
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_JMICRON=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT8213=m
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_BLK_DEV_TC86C001 is not set
#
# Other IDE chipsets support
#
#
# Note: most of these also require special kernel boot parameters
#
CONFIG_BLK_DEV_4DRIVES=m
CONFIG_BLK_DEV_ALI14XX=m
CONFIG_BLK_DEV_DTC2278=m
CONFIG_BLK_DEV_HT6560B=m
CONFIG_BLK_DEV_QD65XX=m
CONFIG_BLK_DEV_UMC8672=m
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE2
CONFIG_AIC7XXX_RESET_DELAY_MSP00
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE2
CONFIG_AIC79XX_RESET_DELAY_MS000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
CONFIG_LIBFC=m
CONFIG_FCOE=m
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_MVSAS=m
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS
CONFIG_SCSI_SYM53C8XX_MAX_TAGSd
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
CONFIG_SCSI_U14_34F_TAGGED_QUEUE=y
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_SRP=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_INIC162X=m
CONFIG_PATA_ACPI=m
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_CMD640_PCI=m
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
CONFIG_PATA_CS5535=m
CONFIG_PATA_CS5536=m
CONFIG_PATA_CYPRESS=m
CONFIG_PATA_EFAR=m
CONFIG_ATA_GENERIC=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_ISAPNP=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_LEGACY=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OPTI=m
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_QDI=m
CONFIG_PATA_RADISYS=m
CONFIG_PATA_RZ1000=m
CONFIG_PATA_SC1200=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
CONFIG_PATA_WINBOND_VLB=m
CONFIG_PATA_SCH=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_DELAY=m
CONFIG_DM_RAID45=m
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE8
CONFIG_FUSION_MAX_FC_SGE%6
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_DV1394=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_NET_SB1000=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
# CONFIG_ARCNET_COM20020 is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_LANCE=m
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
CONFIG_ULTRA=m
CONFIG_SMC9194=m
CONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not set
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI52=m
CONFIG_NI65=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_AT1700=m
CONFIG_DEPCA=m
CONFIG_HP100=m
CONFIG_NET_ISA=y
CONFIG_E2100=m
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_LP486E=m
CONFIG_ETH16I=m
CONFIG_NE2000=m
CONFIG_ZNET=m
CONFIG_SEEQ8005=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_AC3200=m
CONFIG_APRICOT=m
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
CONFIG_CS89x0=m
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R6040=m
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_ATL2=m
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_E1000E=m
CONFIG_IP1000=m
CONFIG_IGB=m
CONFIG_IGB_LRO=y
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
CONFIG_IXGBE=m
CONFIG_IXGBE_LRO=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGB=m
CONFIG_S2IO=m
CONFIG_MYRI10GE=m
CONFIG_NETXEN_NIC=m
CONFIG_NIU=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
CONFIG_SFC=m
# CONFIG_SFC_RESOURCE is not set
CONFIG_TR=y
CONFIG_IBMTR=m
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_SKISA=m
CONFIG_PROTEON=m
CONFIG_ABYSS=m
CONFIG_SMCTR=m
#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=m
# CONFIG_ARLAN is not set
CONFIG_WAVELAN=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
CONFIG_WLAN_80211=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
CONFIG_ATH9K=m
CONFIG_IWLWIFI=m
CONFIG_IWLCORE=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLWIFI_RFKILL=y
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWLAGN=m
CONFIG_IWLAGN_SPECTRUM_MEASUREMENT=y
CONFIG_IWLAGN_LEDS=y
CONFIG_IWL4965=y
CONFIG_IWL5000=y
CONFIG_IWL3945=m
CONFIG_IWL3945_RFKILL=y
CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
CONFIG_IWL3945_LEDS=y
# CONFIG_IWL3945_DEBUG is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
CONFIG_B43_PIO=y
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_RFKILL=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_RT2X00=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_RFKILL=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2400PCI=m
CONFIG_RT2400PCI_RFKILL=y
CONFIG_RT2400PCI_LEDS=y
CONFIG_RT2500PCI=m
CONFIG_RT2500PCI_RFKILL=y
CONFIG_RT2500PCI_LEDS=y
CONFIG_RT61PCI=m
CONFIG_RT61PCI_RFKILL=y
CONFIG_RT61PCI_LEDS=y
CONFIG_RT2500USB=m
CONFIG_RT2500USB_LEDS=y
CONFIG_RT73USB=m
CONFIG_RT73USB_LEDS=y
# CONFIG_RT2X00_LIB_DEBUGFS is not set
# CONFIG_RT2X00_DEBUG is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_HSO=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_PCMCIA_IBMTR=m
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
# CONFIG_COSA is not set
CONFIG_LANMEDIA=m
CONFIG_SEALEVEL_4021=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
# CONFIG_PC300 is not set
CONFIG_PC300TOO=m
CONFIG_N2=m
CONFIG_C101=m
CONFIG_FARSYNC=m
# CONFIG_DSCC4 is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
# CONFIG_WAN_ROUTER_DRIVERS is not set
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
# CONFIG_SBNI is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=m
CONFIG_ISDN=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_SPORTSTER=y
CONFIG_HISAX_MIC=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_ISURF=y
CONFIG_HISAX_HSTSAPHIR=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
CONFIG_HISAX_DEBUG=y
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
#
# Active cards
#
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_SC=m
CONFIG_ISDN_DRV_ACT2000=m
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_GIGASET_UNDOCREQ=y
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X24
CONFIG_INPUT_MOUSEDEV_SCREEN_Yv8
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_GPIO=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_INPORT=m
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_GPIO=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_ELOUSB=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
CONFIG_CYZ_INTR=y
CONFIG_DIGIEPCA=m
CONFIG_ESPSERIAL=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_ISI=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
CONFIG_SX=m
CONFIG_RIO=m
CONFIG_RIO_OLDPCI=y
CONFIG_STALDRV=y
CONFIG_NOZOMI=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS
CONFIG_SERIAL_8250_RUNTIME_UARTS=8
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=m
CONFIG_SERIAL_8250_ACCENT=m
CONFIG_SERIAL_8250_BOCA=m
CONFIG_SERIAL_8250_EXAR_ST16C554=m
CONFIG_SERIAL_8250_HUB6=m
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=m
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS@96
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_CRASHER=m
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=m
CONFIG_I2C_OCORES=m
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_ISA=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_STUB=m
CONFIG_SCx200_I2C=m
CONFIG_SCx200_I2C_SCL
CONFIG_SCx200_I2C_SDA
CONFIG_SCx200_ACB=m
#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=m
CONFIG_AT24=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8591=m
# CONFIG_TPS65010 is not set
CONFIG_SENSORS_MAX6875=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_LM70_LLP=m
#
# SPI Protocol Masters
#
CONFIG_SPI_AT25=m
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_TLE62X0=m
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MCP23S08=m
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_OLPC=m
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7473=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_SBC7240_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=m
CONFIG_MIXCOMWD=m
CONFIG_WDT=m
CONFIG_WDT_501=y
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
CONFIG_HTC_PASIC3=m
# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DMA_CONTIG=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA7111=m
CONFIG_VIDEO_SAA7114=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
# CONFIG_TUNER_3036 is not set
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
# CONFIG_VIDEO_DPC is not set
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX23885=m
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_MT9M001=m
CONFIG_MT9M001_PCA9536_SWITCH=y
CONFIG_SOC_CAMERA_MT9V022=m
CONFIG_MT9V022_PCA9536_SWITCH=y
CONFIG_SOC_CAMERA_PLATFORM=m
CONFIG_VIDEO_SH_MOBILE_CEU=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_CADET=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_GEMTEK=m
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_SF16FMR2=m
CONFIG_RADIO_TERRATEC=m
CONFIG_RADIO_TRUST=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_TYPHOON_PROC_FS=y
CONFIG_RADIO_ZOLTRIX=m
CONFIG_USB_DSBR=m
CONFIG_USB_SI470X=m
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
# CONFIG_DVB_AV7110_FIRMWARE is not set
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
# CONFIG_DVB_USB_CXUSB is not set
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
# CONFIG_DVB_CINERGYT2_TUNING is not set
CONFIG_DVB_SIANO_SMS1XXX=m
CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS=y
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRX397XD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_S5H1411=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DAB=y
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_AGP_EFFICEON=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_VIA_CHROME9=m
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
CONFIG_FB_HGA_ACCEL=y
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not set
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_CYBLA=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_TRIDENT_ACCEL=y
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=m
CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=m
CONFIG_FB_SM501=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI9320=m
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CORGI=m
CONFIG_BACKLIGHT_PROGEAR=m
CONFIG_BACKLIGHT_CARILLO_RANCH=m
CONFIG_BACKLIGHT_MBP_NVIDIA=m
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZEd
CONFIG_VIDEO_SELECT=y
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
#
# Bootsplash configuration
#
CONFIG_BOOTSPLASH=y
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_AD1848_LIB=m
CONFIG_SND_CS4231_LIB=m
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB8_DSP=m
CONFIG_SND_SB16_DSP=m
CONFIG_SND_ISA=y
CONFIG_SND_ADLIB=m
CONFIG_SND_AD1816A=m
CONFIG_SND_AD1848=m
CONFIG_SND_ALS100=m
CONFIG_SND_AZT2320=m
CONFIG_SND_CMI8330=m
CONFIG_SND_CS4231=m
CONFIG_SND_CS4232=m
CONFIG_SND_CS4236=m
CONFIG_SND_DT019X=m
CONFIG_SND_ES968=m
CONFIG_SND_ES1688=m
CONFIG_SND_ES18XX=m
CONFIG_SND_SC6000=m
CONFIG_SND_GUSCLASSIC=m
CONFIG_SND_GUSEXTREME=m
CONFIG_SND_GUSMAX=m
CONFIG_SND_INTERWAVE=m
CONFIG_SND_INTERWAVE_STB=m
CONFIG_SND_OPL3SA2=m
CONFIG_SND_OPTI92X_AD1848=m
CONFIG_SND_OPTI92X_CS4231=m
CONFIG_SND_OPTI93X=m
CONFIG_SND_MIRO=m
CONFIG_SND_SB8=m
CONFIG_SND_SB16=m
CONFIG_SND_SBAWE=m
CONFIG_SND_SB16_CSP=y
CONFIG_SND_SGALAXY=m
CONFIG_SND_SSCAPE=m
CONFIG_SND_WAVEFRONT=m
# CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL is not set
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_HIFIER=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SIS7019=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
# CONFIG_SND_SOC is not set
CONFIG_SOUND_PRIME=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_OSS=m
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
# CONFIG_PSS_HAVE_BOOT is not set
CONFIG_SOUND_SB=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0x0
# CONFIG_AEDSP16_MSS is not set
# CONFIG_AEDSP16_SBPRO is not set
CONFIG_SOUND_KAHLUA=m
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT_POWERBOOK=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_PANTHERLORD_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
#
# Enable Host or Gadget support to see Inventra options
#
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
CONFIG_LEDS_NET48XX=m
CONFIG_LEDS_WRAP=m
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD76X=m
CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_DS1305=m
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RS5C348=m
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_DMATEST=m
CONFIG_DCA=m
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_SMX=m
CONFIG_STAGING=y
CONFIG_ET131X=m
# CONFIG_ET131X_DEBUG is not set
CONFIG_SLICOSS=m
CONFIG_SXG=m
CONFIG_ME4000=m
CONFIG_VIDEO_GO7007=m
CONFIG_VIDEO_GO7007_USB=m
CONFIG_USB_IP_COMMON=m
CONFIG_USB_IP_VHCI_HCD=m
CONFIG_USB_IP_HOST=m
CONFIG_W35UND=m
CONFIG_PRISM2_USB=m
CONFIG_ECHO=m
CONFIG_USB_ATMEL=m
CONFIG_AGNX=m
CONFIG_OTUS=m
CONFIG_RT2860=m
CONFIG_RT2870=m
CONFIG_RT3070=m
CONFIG_BENET=m
CONFIG_RTL8187SE=m
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_NFS4ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=m
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=m
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_FS_NFS4ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_DMAPI=m
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_OCFS2_COMPAT_JBD is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_DMAPI=m
# CONFIG_DMAPI_DEBUG is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGEC7
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_SWAP=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
CONFIG_9P_FS=m
CONFIG_NOVFS=m
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN24
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_UNWIND_INFO=y
CONFIG_STACK_UNWIND=y
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_LKDTM=m
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_DYNAMIC_PRINTK_DEBUG=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_MMIOTRACE is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
CONFIG_KDB=y
CONFIG_KDB_MODULES=m
CONFIG_KDB_OFF=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_KDB_USB=y
CONFIG_KDB_KDUMP=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_DEFAULT="apparmor"
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
CONFIG_SECURITY_APPARMOR_DISABLE=y
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM_KMP=y
# CONFIG_KVM is not set
# CONFIG_LGUEST is not set
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
["PM_Tests_after_patch.log" (PM_Tests_after_patch.log)]
Test Start Time: Wed Mar 25 11:48:06 2009
-----------------------------------------
Testcase Result Exit Value
-------- ------ ----------
POWER_MANAGEMENT PASS 0
-----------------------------------------------
Total Tests: 1
Total Failures: 0
Kernel Version: 2.6.27.19-5-default
Machine Architecture: i686
Hostname:
["PM_Tests_after_patch.out" (PM_Tests_after_patch.out)]
<<<test_start>>>
tag=POWER_MANAGEMENT stime=1237961886
cmdline="runpwtests.sh"
contacts=""
analysis=exit
initiation_status="ok"
<<<test_output>>>
Power Management 1 CONF : Required kernel configuration for SCHED_MC NOT set
incrementing stop
<<<execution_status>>>
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
["PM_Tests_before_patch.log" (PM_Tests_before_patch.log)]
Test Start Time: Wed Mar 25 11:43:10 2009
-----------------------------------------
Testcase Result Exit Value
-------- ------ ----------
POWER_MANAGEMENT PASS 0
-----------------------------------------------
Total Tests: 1
Total Failures: 0
Kernel Version: 2.6.27.19-5-default
Machine Architecture: i686
Hostname:
["PM_Tests_before_patch.out" (PM_Tests_before_patch.out)]
<<<test_start>>>
tag=POWER_MANAGEMENT stime=1237961590
cmdline="runpwtests.sh"
contacts=""
analysis=exit
initiation_status="ok"
<<<test_output>>>
Power Management 1 CONF : Required kernel configuration for SCHED_MC NOT set
incrementing stop
<<<execution_status>>>
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
Ltp-list mailing list
Ltp-list@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ltp-list
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic