[prev in list] [next in list] [prev in thread] [next in thread] 

List:       lse-tech
Subject:    [Lse-tech] Re: Hint benchmark reaches memory size limit on 4gb box
From:       Andrew Morton <akpm () digeo ! com>
Date:       2002-09-20 0:25:46
[Download RAW message or body]

rwhron@earthlink.net wrote:
> 
> >> 1) hint (possibly FLOAT & LONGLONG together)
> >> 2) netperf -t TCP_RR    # request/response
> >> 3) chat # 2 rooms with semi-long lived clients
> >> 4) postmark     # 2 directories + lots of files
> >> 5) configure && make && make check GNU ed
> 
> >> Any suggestions?
> 
> > Dunno, Randy.  I'd say, yes, you hit 3G.  I guess one
> > needs to look to find a way to make it less consumptive.
> 
> It's been running for about 20 hours on 2.5.34-mm1.

Well it sounds like it's stable.  This is on the quad, I assume.

> A few observations:
> The swap happy processes from hint _really_ slowed
> down when they hit swap.

swapout is bust in that kernel.  2.5.36-mm1 has the fix, but
it's just a one-liner:
http://www.zip.com.au/~akpm/linux/patches/2.5/2.5.36/2.5.36-mm1/broken-out/vm-mapping-fix.patch

Really, I just haven't started looking at behaviour under
swappy loads.  Even with simple tests the kernel does seem
to be making incorrect eviction decisions, at a slow rate.

(The test: boot with mem=192m, start `vmstat 1', run your
standard memset(malloc(1G)) test.  On the second run the kernel
is continuously doing a trickle of reads.  Some from swap, some
from executables. It shouldn't.  2.5.26 doesn't. 2.4.19-ac1 does)

> I expect the hint processes to run until either swap
> is full, or they hit the ~3gb limit.  At the current
> rate it may be a day or two.

If a performance test takes more than 5-10 minutes to run, it's
being silly.  30 seconds is enough for most things.
 
> So I'm wondering if you think i should just abort the
> current test, and try 2.5.36-mm1, or if the benchmark
> needs adjustment.

Both, it looks.
 
> ...
> 
>   PID USER     PRI  NI  SIZE  RSS SHARE STAT %CPU %MEM   TIME COMMAND
> 12571 root      16   0  1708  728  1636 S    52.1  0.0   1:15 netperf
> 12572 root      25   0  1656  552  1656 R    47.6  0.0   1:09 netserver
> 10889 root      15   0 20560  18M  1368 D    25.7  0.4 148:43 postmark-1_5
>    11 root      15   0     0    0     0 SW    5.1  0.0 107:05 kswapd0

OK, that's the sort of kswapd load which I see under heavy testing.
That's 1.25% of total CPU, and it really isn't just spinning wheels,
promise.

> ..
> 
> Here is some vmstat 30: cs is high.  Oddly si/so bi/bo and in are 0.
> That's with either procps-2.5.34-mm1 or rml's recent procps.

Yup.  That info got shuffled over to /proc/vmstat.  There will
be some brokenness for a while.

> ..
> iostat 30 says there is really disk activity:
> Device:        tps   Blk_read/s   Blk_wrtn/s   Blk_read   Blk_wrtn
> dev8-0      406.46      6285.98      2083.54     108056      35816  (root/swap)
> dev8-1      103.49      1149.51       916.35      19760      15752  (usr/swap)
> dev8-2      333.51     16341.13     13502.73     280904     232112  (raid5 array)

The sard code seems to be working nicely.
 
> Should the bench be adjusted, or should I boot 2.5.36-mm1?

Both, sorry.


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Lse-tech mailing list
Lse-tech@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/lse-tech
[prev in list] [next in list] [prev in thread] [next in thread]