[prev in list] [next in list] [prev in thread] [next in thread]
List: lm-sensors
Subject: Re: [lm-sensors] [PATCH v2 3/3] hwmon: (it87) Report thermal sensor type as Intel PECI if appropriat
From: Jean Delvare <khali () linux-fr ! org>
Date: 2012-10-31 16:28:48
Message-ID: 20121031172848.6b14b513 () endymion ! delvare
[Download RAW message or body]
On Tue, 30 Oct 2012 12:13:19 -0700, Guenter Roeck wrote:
> IT8721 and IT8728 support Intel PECI temperature reporting. Each sensor
> can be programmed to display the temperature reported on the PECI interface.
>
> If configured for Intel PECI, the driver reported the wrong sensor type for
> the respective thermal sensor. Fix the code to correctly report it as
> "Intel PECI (6)".
>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> ---
> I noticed that IT8718 and IT8720 also support PECI, but differently. Does it
> make sense to add those ? That would be a separate patch, though.
If it is supported by the hardware and driver support is can be made
sane, sure we want it.
> v2: "diode connected" -> diode-connected"
> Reported type was not necessarily 0 if PECI was selected. Fix description.
> FEAT_PECI -> FEAT_TEMP_PECI
> has_peci -> has_temp_peci
> Introduce flag "peci_mask" to indicate which attributes can be
> used to report the PECI temperature
> Reorder code in set_temp_type to check for peci only after checking for
> other types.
>
> Documentation/hwmon/it87 | 3 ++-
> drivers/hwmon/it87.c | 20 +++++++++++++++++---
> 2 files changed, 19 insertions(+), 4 deletions(-)
> (...)
Applied, thanks.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic