[prev in list] [next in list] [prev in thread] [next in thread] 

List:       lm-sensors
Subject:    [lm-sensors] Supermicro X7DB8 sensors3.conf
From:       "Gary E. Miller" <gem () rellim ! com>
Date:       2012-05-30 21:33:25
Message-ID: 20120530143325.45feb5a2.gem () rellim ! com
[Download RAW message or body]

[Attachment #2 (multipart/signed)]


Yo lm_sensors!

See below for a sensors3.conf file for the Supermicro X7DB8 motherboard.

Please post on the wiki.

RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97701
	gem@rellim.com  Tel:+1(541)382-8588

# /etc/sensors.d/X7DB8
# settings for the supermicro X7DB8
# originally written by Gary E. Miller <gem@rellim.com>
# use at your own risk !
# Date: 30 May 2012

# Here's the info as supplied by Supermicro:

#

# Bus Type = SMBus
# One W83793G
# 
# Windbond W83793G, Slave Address=0x2f (0x5E in 8-Bit format)
# =============================================================
# Fan1 Fan Speed, Offset 0x23, 0x24			RPM = 1350000/Data
# Fan2 Fan Speed, Offset 0x25, 0x26			RPM = 1350000/Data
# Fan3 Fan Speed, Offset 0x27, 0x28			RPM = 1350000/Data
# Fan4 Fan Speed, Offset 0x29, 0x2a			RPM = 1350000/Data
# Fan5 Fan Speed, Offset 0x2b, 0x2c			RPM = 1350000/Data
# Fan6 Fan Speed, Offset 0x2d, 0x2e			RPM = 1350000/Data
# Fan7/CPU1 Fan Speed, Offset 0x2f, 0x30		RPM = 1350000/Data
# Fan8/CPU2 Fan Speed, Offset 0x31, 0x32		RPM = 1350000/Data
# CPU1 Core Voltage, Offset 0x10			Voltage = Data* 0.008	
# CPU2 Core Voltage, Offset 0x11			Voltage = Data* 0.008
# -12V Voltage, Offset 0x14				Voltage = ((Data*0.016)- (2.048*(232./260.)))/(1-(232./260.))
# +1.5V Voltage, Offset 0x15				Voltage = Data* 0.016
# +3.3V Voltage, Offset 0x16				Voltage = Data* 0.016
# +12V Voltage, Offset 0x17				Voltage = Data* 0.008/ (10./120.)
# +5V Voltage, Offset 0x18				Voltage = Data* 0.024
# 5Vsb Voltage, Offset 0x19				Voltage = Data* 0.024
# Battery Voltage, Offset 0x1a				Voltage = Data* 0.016
# CPU1 CoreA (PECI Agent1) Temperature, Offset 0x1c	Temperature = Data
# CPU1 CoreB (PECI Agent2) Temperature, Offset 0x1d	Temperature = Data
# CPU2 CoreA (PECI Agent3) Temperature, Offset 0x1e	Temperature = Data
# CPU2 CoreB (PECI Agent4) Temperature, Offset 0x1f	Temperature = Data
# System Temperature, Offset 0x20			Temperature = Data
# Chassis Intrusion, Offset 0x44, BitMask 0x40		1 = Bad, 0 = Good
# 
# 
# Windbond W83627HF
# =============================================================
# Power Supply Failure, GP11(From W83627HF)		1 = Good, 0 = Bad
#

chip "w83627hf-isa-0290"
    # no driver access to GP11, so I turned off everything.
    ignore in0
    ignore in1
    ignore in2
    ignore in3
    ignore in4
    ignore in5
    ignore in6
    ignore in7
    ignore in8
    ignore cpu0_vid
    ignore fan1
    ignore fan2
    ignore fan3
    ignore temp1
    ignore temp2
    ignore temp3



bus "i2c-0" "SMBus I801 adapter at 1100"

chip "w83793-i2c-0-2f"

	label fan7	fanCPU1
	label fan8	fanCPU2

# Voltages ; note that in the table above, the .008, .016, and .024 factors are
# already computed in the driver...
	label in0 "CPU1"
	label in1 "CPU2"
	ignore in2
	label in3 "-12V"
	label in4 "1.5V"
	label in5 "3.3V"
	label in6 "12V"
	label in7 "5V"
	label in8 "5Vsb"
	label in9 "Vbat"

	label temp1 "CPU1 CoreA"
	label temp2 "CPU1 CoreB"
	label temp3 "CPU2 CoreA"
	label temp4 "CPU2 CoreB"
	label temp5 "mobo"

	compute in3  (@ - (2.048*(232/260)))/(1-(232/260)), (@*(1-(232/260)))+(2.048*(232/260))
	compute in6  @ * 12 , @ / 12


	# CPUs
	set in0_min  0.82
	set in0_max  1.35
	set in1_min  0.82
	set in1_max  1.35

	# -12V, 10%
	set in3_max  -12.0 * 0.90
	set in3_min  -12.0 * 1.10
	# 3.3V, 5%
	set in5_min  3.3 * 0.95
	set in5_max  3.3 * 1.05
	# 12V, 10%
	set in6_min  12.0 * 0.90
	set in6_max  12.0 * 1.10
	# 5V, 10%
	set in7_min  5.0 * 0.90
	set in7_max  5.0 * 1.10
	# 5Vsb, 10%
	set in8_min  5.0 * 0.90
	set in8_max  5.0 * 1.10
	# Vbat, 10%
	set in9_min  3.0 * 0.90
	set in9_max  3.0 * 1.10



["signature.asc" (application/pgp-signature)]

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

[prev in list] [next in list] [prev in thread] [next in thread]