[prev in list] [next in list] [prev in thread] [next in thread]
List: lm-sensors
Subject: Re: [lm-sensors] [Patch]Adding_threshold_support_to_coretemp
From: Guenter Roeck <guenter.roeck () ericsson ! com>
Date: 2010-12-17 22:28:11
Message-ID: 20101217222811.GC13207 () ericsson ! com
[Download RAW message or body]
On Fri, Dec 17, 2010 at 04:56:39PM -0500, Jean Delvare wrote:
> On Fri, 17 Dec 2010 23:10:17 +0530, R, Durgadoss wrote:
> > > What is supposed to happen if this threshold is reached ? Does it mean "it is
> > > too cold",
> > > or does it mean "it is ok to turn off some of the cooling devices which were
> > > turned on earlier" ?
> > >
> > > If it means "it is too cold", question is what the system is supposed to do
> > > about it.
> > > I am not sure if such a use would be of much value.
> > >
> > > If it means "it is no longer too hot", the atribute name should really be
> > > temp1_max_threshold.
> >
> > It means "it is no longer too hot". So, shall change the name to _max_threshold.
>
> I'm fairly certain Guenter actually meant temp1_max_hyst, per
> Documentation/hwmon/sysfs-interface.
>
Definitely yes ... I must have been low on coffee or something :(.
Thanks for correcting me.
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic