[prev in list] [next in list] [prev in thread] [next in thread]
List: lm-sensors
Subject: [lm-sensors] [PATCH] hwmon: (atxp1) Fix device detection logic
From: Jean Delvare <khali () linux-fr ! org>
Date: 2008-06-29 10:31:11
Message-ID: 20080629123111.26ffc368 () hyperion ! delvare
[Download RAW message or body]
The atxp1 device detection code has a major logic flaw, fix it. Not
sure how we managed to miss this when the driver was merged...
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Sebastian Witt <se.witt@gmx.net>
---
Sebastian, can you please review and test this patch? I've tested with
i2c-stub but an additional test with a real device can't hurt.
drivers/hwmon/atxp1.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- linux-2.6.26-rc8.orig/drivers/hwmon/atxp1.c 2008-06-29 11:52:24.000000000 +0200
+++ linux-2.6.26-rc8/drivers/hwmon/atxp1.c 2008-06-29 12:25:49.000000000 +0200
@@ -31,7 +31,7 @@
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("System voltages control via Attansic ATXP1");
-MODULE_VERSION("0.6.2");
+MODULE_VERSION("0.6.3");
MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
#define ATXP1_VID 0x00
@@ -298,7 +298,8 @@ static int atxp1_detect(struct i2c_adapt
(i2c_smbus_read_byte_data(new_client, 0x3f) == 0) &&
(i2c_smbus_read_byte_data(new_client, 0xfe) == 0) &&
(i2c_smbus_read_byte_data(new_client, 0xff) == 0) )) {
-
+ goto exit_free;
+ } else {
/* No vendor ID, now checking if registers 0x10,0x11 (non-existent)
* showing the same as register 0x00 */
temp = i2c_smbus_read_byte_data(new_client, 0x00);
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic