[prev in list] [next in list] [prev in thread] [next in thread]
List: lm-sensors
Subject: Re: [lm-sensors]
From: Dominik Geyer <dominik.geyer () gmx ! de>
Date: 2008-06-01 10:15:33
Message-ID: loom.20080601T100607-694 () post ! gmane ! org
[Download RAW message or body]
Bruno Prémont <bonbons <at> linux-vserver.org> writes:
>
> On a Commell LE-365 I get readings for fan speed that are broken about
> 10% of the time.
> The board has a Winbond W83697 chip (I can't check the exact chip name
> on the board as it's hidden by a heatsink, the photo from Commell, as
> as well as the manual indicate a HG, the kenrel reports:
> [ 3.572831] w83627hf: Found W83697HF chip at 0x290
> [ 3.572831] WDT driver for the Winbond(TM) W83627HF/THF/HG Super I/O
chip initialising.
> [ 3.572831] w83627hf/thf/hg WDT: Watchdog already running. Resetting
timeout to 60 sec
> [ 3.572831] w83627hf/thf/hg WDT: initialized. timeout=60 sec
(nowayout=0)
> )
Hm, thats strange. I've got a VIA-EPIA-EK8000EG with a W83697HG as well and
didn't have any wrong readings with fan_input (2.6.25.3 kernel).
By the way: I noticed that you are using the w83627hf_wdt in your
kernel-config. Did you already test the watchdog? On my board the w83627hf_wdt
loads correctly but does not work. I'm using the w83697_wdt instead.
--
Dominik Geyer
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic