[prev in list] [next in list] [prev in thread] [next in thread] 

List:       lm-sensors
Subject:    [lm-sensors] strange output values from W83627HG chip
From:       r.marek () assembler ! cz (Rudolf Marek)
Date:       2006-12-31 14:28:23
Message-ID: 4597C907.9070503 () assembler ! cz
[Download RAW message or body]

Hi all and happy new year!

I promised holiday, but CDMA works here. ;)

> I'm just got new server based on Supermicro X7DVA-E mainboard with
> W83627HG chip.
> 
> Successfully loaded kernel driver w83627hf (using 2.6.20-rc2 kernel with
> lm-sensors 2.10.0) and noticed that BIOS values of sensors differs from
> lm-sensors output results.
> 
> These are values from BIOS:
> 
> PECI Agent1: 21 C
> PECI Agent2: 18 C
> System Temperature 24 C
> 
> FAN1: 3708 RPM
> FAN2: 3648 RPM
> FAN3: N/A
> FAN4: 1232 RPM
> FAN5: 1260 RPM
> FAN6: N/A
> 
> Vcore A: 1.228 V
> Vcore B: 1.232 V
> -12V -12.809 V
> P1V5 1.488 V
> +3.3V 3.328 V
> +12V 12.192 V
> 5Vsb 5.016 V
> 5Vdd 4.848 V
> P_VTT 1.194 V
> V_bat 3.152 V
> 
> 
> And these ones I?m getting from linux tool ?sensors?:
> 
> w83627hf-isa-0290
> Adapter: ISA adapter
> VCore 1: +3.36 V (min = +1.34 V, max = +1.49 V) ALARM
> VCore 2: +3.41 V (min = +1.34 V, max = +1.49 V) ALARM
> +3.3V: +0.91 V (min = +3.14 V, max = +3.47 V) ALARM
> +5V: +5.08 V (min = +4.76 V, max = +5.24 V)
> +12V: +4.50 V (min = +10.82 V, max = +13.19 V) ALARM
> -12V: -6.93 V (min = -13.18 V, max = -10.80 V) ALARM
> -5V: -1.98 V (min = -5.25 V, max = -4.75 V) ALARM
> V5SB: +5.75 V (min = +4.76 V, max = +5.24 V) ALARM
> VBat: +2.14 V (min = +2.40 V, max = +3.60 V) ALARM
> Fan1: 0 RPM (min = 3013 RPM, div = 2) ALARM
> Fan2: 0 RPM (min = 2657 RPM, div = 2) ALARM
> Fan3: 0 RPM (min = 2657 RPM, div = 2) ALARM
> Temp1: +29?C (high = +50?C, hyst = +45?C) sensor = thermistor
> Temp2: +32.5?C (high = +80?C, hyst = +75?C) sensor = thermistor
> Temp3: +33.0?C (high = +80?C, hyst = +75?C) sensor = thermistor
> vid: +1.419 V (VRM Version 11.0)
> alarms:
> beep_enable:
> Sound alarm enabled
> 
> 
> Very strange values in almost all sensors (voltages, temperature) and
> especially in Fan speeds. I could not get any value except zero.


> Some ideas what I?m doing wrong?

Yes because you have on your board another chip, which is actually used -
W83793. Just modprobe w83793 driver, and report if it is OK. And please use the
lm-sensors version 2.10.1 which has support for this chip, the sensors-detect
from 2.10.1 should find it.

Please report back the output of sensors command, and dont forget to update your
sensors.conf

Regards
Rudolf


[prev in list] [next in list] [prev in thread] [next in thread]