--===============0587629715==
Content-Type: multipart/alternative;
boundary="----=_Part_11624_4566137.1208767502893"
------=_Part_11624_4566137.1208767502893
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Hi,
I've got a mpc8347e based board with a working 2.6.20 kernel and a dtb.
I wasn't able to boot on a more recent kernel (>2.6.20).
To update my config. I tried ppc and powerpc arch.:
a) make ARCH=ppc CROSS_COMPILE=ppc_6xx- oldconfig
then select 6xx/MPC834X SYS
b) make ARCH=powerpc CROSS_COMPILE=ppc_6xx- oldconfig
then select 83XX/MPC834X MDS
On each generated kernel, I'm stuck at:
Booting using flat device tree at 0x3c0000
For infos, I use ELDK 4.2, U-Boot 1.1.4 and always the same dtb.
did I miss something ?
cheers,
Fathi
------=_Part_11624_4566137.1208767502893
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Hi,
I've got a mpc8347e based board with a working 2.6.20 kernel and a dtb.
I wasn't able to boot on a more recent kernel (>2.6.20).
To update my config. I tried ppc and powerpc arch.:
a) make ARCH=ppc CROSS_COMPILE=ppc_6xx- oldconfig
then select 6xx/MPC834X SYS
b) make ARCH=powerpc CROSS_COMPILE=ppc_6xx- oldconfig
then select 83XX/MPC834X MDS
On each generated kernel, I'm stuck at:
Booting using flat device tree at 0x3c0000
For infos, I use ELDK 4.2, U-Boot 1.1.4 and always the same dtb.
did I miss something ?
cheers,
Fathi
------=_Part_11624_4566137.1208767502893--
--===============0587629715==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
--===============0587629715==--