[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-wlan-user
Subject:    [lwlan-user] [non-subscriber] card services does not match
From:       bhaje () gmx ! de
Date:       2002-01-31 10:01:51
[Download RAW message or body]

Hi,

I´m trying to use a Siemens I-Gate Card on a SuSE 7.3 System. 
I´m using the Kernel-Built in pcmcia_cs. cardmgr -V says its Version 3.1.28.
I configured the appropriate sources and then compiled and installed the
linux-wlan-ng-0.1.8-pre13 driver. When inserting the card I get the following:


Jan 31 10:36:24 linux cardmgr[4330]: initializing socket 1
Jan 31 10:36:24 linux cardmgr[4330]: socket 1: Intersil Siemens I-Gate
11Mbit PC Card
Jan 31 10:36:24 linux cardmgr[4330]: executing: 'insmod -v
/lib/modules/2.4.10//pcmcia/prism2_cs.o'
Jan 31 10:36:24 linux cardmgr[4330]: + Using
/lib/modules/2.4.10//pcmcia/prism2_cs.o
Jan 31 10:36:24 linux cardmgr[4330]: + Symbol version prefix ''
Jan 31 10:36:24 linux kernel: init_module: prism2_cs.o: 0.1.8-pre12 Loaded
Jan 31 10:36:24 linux kernel: init_module: dev_info is: prism2_cs
Jan 31 10:36:24 linux kernel: prism2_cs: CardServices release does not
match!
Jan 31 10:36:24 linux cardmgr[4330]: +
/lib/modules/2.4.10//pcmcia/prism2_cs.o: init_module: Operation not permitted
Jan 31 10:36:24 linux cardmgr[4330]: + Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ parameters
Jan 31 10:36:24 linux cardmgr[4330]: insmod exited with status 1
Jan 31 10:36:24 linux cardmgr[4330]: executing: 'modprobe -v prism2_cs'
Jan 31 10:36:24 linux cardmgr[4330]: + /sbin/insmod
/lib/modules/2.4.10/pcmcia/prism2_cs.o
Jan 31 10:36:24 linux cardmgr[4330]: + Using
/lib/modules/2.4.10/pcmcia/prism2_cs.o
Jan 31 10:36:24 linux cardmgr[4330]: + Symbol version prefix ''
Jan 31 10:36:24 linux kernel: init_module: prism2_cs.o: 0.1.8-pre12 Loaded
Jan 31 10:36:24 linux kernel: init_module: dev_info is: prism2_cs
Jan 31 10:36:24 linux kernel: prism2_cs: CardServices release does not
match!
Jan 31 10:36:24 linux cardmgr[4330]: +
/lib/modules/2.4.10/pcmcia/prism2_cs.o: init_module: Operation not permitted
Jan 31 10:36:24 linux cardmgr[4330]: +
/lib/modules/2.4.10/pcmcia/prism2_cs.o: insmod /lib/modules/2.4.10/pcmcia/prism2_cs.o failed
Jan 31 10:36:24 linux cardmgr[4330]: +
/lib/modules/2.4.10/pcmcia/prism2_cs.o: insmod prism2_cs failed
Jan 31 10:36:24 linux cardmgr[4330]: + Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ parameters
Jan 31 10:36:24 linux cardmgr[4330]: modprobe exited with status 255
Jan 31 10:36:25 linux cardmgr[4330]: get dev info on socket 1 failed:
Resource temporarily unavailable


Cause I did it once on a SuSE 7.2 Installation I think my settings in
/etc/pcmcia/wlan-ng.conf are correct for the card.
When I´m using a Cisco Aironet 340 Card everything is working well.

thanks for help

Björn




-- 
-- 

Björn Haje
mailto:bhaje@gmx.de
PGP-KeyID: 0xB3A620BB
Fingerprint: CB9B 6447 E8EC 0BA7 A1A9 0EE3 B865 931F B3A6 
20BB



[prev in list] [next in list] [prev in thread] [next in thread]