[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-wireless
Subject: [PATCH] net: wireless: marvell: libertas: Use new structure for SPI transfer delays
From: Sergiu Cuciurean <sergiu.cuciurean () analog ! com>
Date: 2020-02-27 14:06:34
Message-ID: 20200227140634.9286-1-sergiu.cuciurean () analog ! com
[Download RAW message or body]
In a recent change to the SPI subsystem [1], a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.
The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).
[1] commit bebcfd272df6 ("spi: introduce `delay` field for
`spi_transfer` + spi_transfer_delay_exec()")
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
---
drivers/net/wireless/marvell/libertas/if_spi.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/marvell/libertas/if_spi.c \
b/drivers/net/wireless/marvell/libertas/if_spi.c index d07fe82c557e..3c3f266bf116 \
100644
--- a/drivers/net/wireless/marvell/libertas/if_spi.c
+++ b/drivers/net/wireless/marvell/libertas/if_spi.c
@@ -235,8 +235,9 @@ static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, \
int len) spi_message_add_tail(&dummy_trans, &m);
} else {
/* Busy-wait while the SPU fills the FIFO */
- reg_trans.delay_usecs =
+ reg_trans.delay.value =
DIV_ROUND_UP((100 + (delay * 10)), 1000);
+ reg_trans.delay.unit = SPI_DELAY_UNIT_USECS;
}
/* read in data */
--
2.17.1
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic