[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-wireless
Subject: [PATCH v3 1/2] ath10k: add refcount for ath10k_core_restart
From: Wen Gong <wgong () codeaurora ! org>
Date: 2019-12-31 9:28:05
Message-ID: 20191231092806.6247-2-wgong () codeaurora ! org
[Download RAW message or body]
When it has more than one restart_work queued meanwhile, the 2nd
restart_work is very esay to break the 1st restart work and lead
recovery fail.
Add a ref count to allow only one restart work running untill
device successfully recovered.
Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/core.c | 8 ++++++++
drivers/net/wireless/ath/ath10k/core.h | 2 ++
drivers/net/wireless/ath/ath10k/mac.c | 1 +
3 files changed, 11 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 91f131b87efc..9439e575ec63 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2199,6 +2199,14 @@ static void ath10k_core_restart(struct work_struct *work)
{
struct ath10k *ar = container_of(work, struct ath10k, restart_work);
int ret;
+ int restart_count;
+
+ restart_count = atomic_add_return(1, &ar->restart_count);
+ if (restart_count > 1) {
+ ath10k_warn(ar, "can not restart, count: %d\n", restart_count);
+ atomic_dec(&ar->restart_count);
+ return;
+ }
set_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags);
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index e57b2e7235e3..810c99f2dc0e 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -982,6 +982,8 @@ struct ath10k {
/* protected by conf_mutex */
u8 ps_state_enable;
+ atomic_t restart_count;
+
bool nlo_enabled;
bool p2p;
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 3856edba7915..bc1574145e66 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7208,6 +7208,7 @@ static void ath10k_reconfig_complete(struct ieee80211_hw *hw,
ath10k_info(ar, "device successfully recovered\n");
ar->state = ATH10K_STATE_ON;
ieee80211_wake_queues(ar->hw);
+ atomic_dec(&ar->restart_count);
}
mutex_unlock(&ar->conf_mutex);
--
2.23.0
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic