[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-virtual-server
Subject: RE: Client access through nat to LVS (reused ports)
From: Matthias Krauss <MKrauss () hitchhiker ! com>
Date: 2004-01-20 14:38:04
Message-ID: C0DC00899F8CD411BA6700508B44E4D20151555F () mars ! intern
[Download RAW message or body]
François:
>> IP 59:57 NONE 212.166.x.y:0 0.0.0.5:0 10.0.1.31:0
>This is what you have to look at. If I understood everything well, those
are the persistent IP
>classes. Now, Using wrr with a big persistent timeout is not a good
solution, I advise you to switch >to wlc (least connection), which will do a
better job, I think.
Yes, thats the persistent class.
I agree, load is much more equal now using wlc but the problems with my NAT
clients
ais still the same.
Is there anything else what i can do with clients which ip source addresses
appearing many
times in the connection table using different source ports and a high
persistance timeout?
this pointed me to:
http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.ipvsadm.html#reusing_
ports
think thats all i can do, or ?
many thanks
Matthias
_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@LinuxVirtualServer.org
Send requests to lvs-users-request@LinuxVirtualServer.org
or go to http://www.in-addr.de/mailman/listinfo/lvs-users
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic