[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-virtual-server
Subject: mac adress problem ?
From: Cyrille Mertes <cyrille () iwebgroup ! com>
Date: 2003-01-24 17:54:32
[Download RAW message or body]
Hi,
I use a temporary load balancer, LBtemp, redhat 7.3, kernel 2.4.18-14,
IPVS 1.0.4 (source) and piranha 0.7.0-3 (source). No hidden patch on
this LB.
All my web servers are redhat 7.2, kernel 2.4.19 with hidden patch
(hidden-2.4.19pre5-1.diff).
Everything is working fine with my current setup. I use direct routing.
Right now, I setup two new load balancer LB1 and LB2. One primary and on
secondary : redhat 8.0, kernel 2.4.19 with hidden patch
(hidden-2.4.19pre5-1.diff) and ipvs-patch
(linux-2.4.19-ipvs-1.0.7.patch), ipvsadm-1.21 (source) and
piranha-0.7.0-3 (source).
So, here is my problem....
If LB temp is working and I stop pulse on it, then start pulse on LB1
in order to swap on it, the load balancing is working fine.
If LB temp is working and I stop pulse on it, then start pulse on LB2
in order to swap on it, the load balancing doesn't work
If LB1 is working and I stop pulse on it, then start pulse on LB2 in
order to swap on it, the load balancing doesn't work (so the failover
will not work if my primary fail).
I think I found the problem on LB2. If I changed the ip of all the
virtual server (in lvs.conf for piranha on LB2 and the loop back adress
on all my web server) LB2 is working fine !!!!
So the problem is due to the mac adress ?? But how can you explain that
I'm able to swith from to LBtemp to LB1 (no mac adress problem) but not
from LBtemp to LB2 (mac adress problem ?) ??
Thanks for your help.
Cyrille.
_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@LinuxVirtualServer.org
Send requests to lvs-users-request@LinuxVirtualServer.org
or go to http://www.in-addr.de/mailman/listinfo/lvs-users
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic