[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-virtual-server
Subject:    Re: what's behind the curtain?
From:       Joseph Mack <mack.joseph () epa ! gov>
Date:       2002-01-31 11:17:51
[Download RAW message or body]

Michael Cunningham wrote:

> I have been looking over the howtos and other scripts. I am confused
> as the what is going on behind the scenes with all these different setup
> scripts.
> (Like configure). I want to be able to set everything up without the
> help of a script.

setting up an LVS is not difficult. I didn't look at all your commands,
but you seem to have the idea:- add services on the director, handle
the arp problem on the realservers, setup the gateway(s).

The problem is doing it many times for different services and different
setups. Then you need a script. The various scripts also check the
network etc and setup health checking and failover.

I doubt if you're missing anything

Joe

-- 
Joseph Mack PhD, Senior Systems Engineer, Lockheed Martin
contractor to the National Environmental Supercomputer Center, 
mailto:mack.joseph@epa.gov ph# 919-541-0007, RTP, NC, USA

_______________________________________________
LinuxVirtualServer.org mailing list - lvs-users@LinuxVirtualServer.org
Send requests to lvs-users-request@LinuxVirtualServer.org
or go to http://www.in-addr.de/mailman/listinfo/lvs-users
[prev in list] [next in list] [prev in thread] [next in thread]