[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-video
Subject: Re: [V4L] unloading modules fails
From: Marcel Janssen <mphm.janssen () home ! nl>
Date: 2001-07-23 16:55:38
[Download RAW message or body]
On Sunday 22 July 2001 23:36, you wrote:
> Marcel Janssen wrote:
> > Hi,
> >
> > I'm using kernel 2.4.4.
> > When I load the bttv modules and also the ov511 module, I can't unload
> > the bttv modules anymore.
I upgraded to the 2.4.7 kernel and I found the problem is still there and
only occurs in the following case :
1) load the bttv modules
2) start xawtv -device /dev/video0 (bttv card)
3) load the ov511 module
4) start xawtv -device /dev/video1 (webcam)
5) close xawtv that is displaying the webcam image
6) unload the ov511 module (no problem).
7) close xawtv that is using the bttv card.
After this I can't unload the bttv modules anymore.
(they report being busy)
I used the drivers that come with the 2.4.7 kernel.
In case I first unload the bttv modules, everything seems ok.
--
Marcel Janssen
_______________________________________________
Video4linux-list mailing list
Video4linux-list@redhat.com
https://listman.redhat.com/mailman/listinfo/video4linux-list
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic