[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-video
Subject:    Re: Support for Medion CTX953
From:       Benjamin Adler <benadler () gmx ! net>
Date:       2007-08-09 20:13:11
Message-ID: 200708092213.11198.benadler () gmx ! net
[Download RAW message or body]

Am Donnerstag, 9. August 2007 21:30 schrieb hermann pitton:
> Firmware revision 20 should _not_ be used on recent cards, always latest
> fetchable with the script from LifeView or where available.
> Anyway, if the firmware eeprom is correctly configured, firmware will
> always be loaded from there, regardless what is in /lib/firmware.
>
> Benjamin, can you give card=109 a try and report for analog TV?
> Also send all relevant dmesg for it, also concerning tuner is at 0x60.

"modprobe saa7134 card=109" does NOT lock up my keyboard and produces:

saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:04:01.0, rev: 209, irq: 22, latency: 64, mmio: 
0xff9ff800
saa7133[0]: subsystem: 16be:0010, board: Philips Tiger - S Reference design 
[card=109,insmod option]
saa7133[0]: board init: gpio is 0
saa7133[0]: i2c eeprom 00: be 16 10 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 2c 02 51 96 2b
saa7133[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
saa7133[0]: i2c eeprom 40: ff 21 00 c0 96 10 03 22 15 00 fd 79 44 9f c2 8f
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
DVB: registering new adapter (saa7133[0]).
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock

After tvtime-scanner did NOT find any channels, dmesg also said:

tda1004x: found firmware revision 26 -- ok
tda827x_probe_version: could not read from tuner at addr: 0xc2

If you like, I'd offer you to log in to my machine to see all this yourself.

I'll try to take a few images of the card tonight and post them.

thanks a lot!
ben

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
[prev in list] [next in list] [prev in thread] [next in thread]