[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-usb-users
Subject: [Linux-usb-users] internal usb card reader
From: Cornelius_Kölbel <cornelius.koelbel () gmx ! de>
Date: 2003-10-10 15:18:58
[Download RAW message or body]
Hello List,
I installed the internal card reader ucr-61s2b on my asus a7v board.
I guess I can see it:
cat /proc/scsi/scsi says:_
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: DCAS-34330 Rev: S65A
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: PLEXTOR Model: CD-R PX-R412C Rev: 1.04
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: IC Model: USB Storage-CFC Rev: 301b
Type: Direct-Access ANSI SCSI revision: 02
But, is this the right vendor etc?
From my /proc/partitions I see
--snip--
8 0 4233600 sda 40346 97361 1101642 455190 4588 29315 271608
611680 0 395720 1067870
8 1 4233200 sda1 40345 97358 1101634 455180 4588 29315 271608
611680 0 395710 1067860
8 16 15744 sdb 1 3 8 10 0 0 0 0 0 10 10
8 17 15664 sdb1 0 0 0 0 0 0 0 0 0 0 0
--snip--
That it is the device /dev/sdb...
But, how do I have to mount it?
When I try to mount /dev/sdb or /dev/sdb1 the mount commant hangs.
When I try to use the sg3_utils sg_scan or sg_map they are hanging, too.
I am using the rh9 kernel 2.4.20-8
Thanks
Cornelius
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
SourceForge.net hosts over 70,000 Open Source Projects.
See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
_______________________________________________
Linux-usb-users@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic