[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-usb-users
Subject: [Linux-usb-users] Konica kd-200z Digital camera
From: Jarno Saarinen <jape () evonet ! fi>
Date: 2002-01-28 9:51:42
[Download RAW message or body]
This camera claims to be usb-mass storage.
kernel detects camera fine, but there are some errors and
mounting sda1 fails, it just complains that
mount: /dev/sda1 is not a valid block device
here's some clips I thought would help solving this problem
first /proc/bus/usb/drivers looks fine for me
<clip>
usbdevfs
hub
usb-storage
</clip>
/proc/bus/usb/devices is also something I expected
<clip>
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=1820
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0451 ProdID=2036 Rev= 1.01
S: Product=General Purpose USB Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04c8 ProdID=0723 Rev= 1.00
S: Manufacturer=Konica
S: Product=KD-200Z
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
</clip>
and /proc/scsi/usb-storage-0/0 makes sence
<clip>
Host scsi0: usb-storage
Vendor: Konica
Product: KD-200Z
Serial Number: None
Protocol: Transparent SCSI
Transport: Bulk
GUID: 04c807230000000000000000
Attached: Yes
</clip>
as /proc/scsi/scsi
<clip>
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: Konica Model: KD-200Z Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
</clip>
and here's my var/log messages ....
<clip>
Jan 28 10:24:18 stonehill kernel: usb.c: registered new driver usbdevfs
Jan 28 10:24:18 stonehill kernel: usb.c: registered new driver hub
Jan 28 10:24:18 stonehill kernel: usb-uhci.c: $Revision: 1.268 $ time
10:07:52 Jan 28 2002
Jan 28 10:24:18 stonehill tammi 28 10:24:18 autofs: automount startup
succeededJan 28 10:24:18 stonehill kernel: usb-uhci.c: High bandwidth
mode enabled
Jan 28 10:24:18 stonehill kernel: PCI: Found IRQ 11 for device 00:07.2
Jan 28 10:24:18 stonehill kernel: usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 11
Jan 28 10:24:18 stonehill kernel: usb-uhci.c: Detected 2 ports
Jan 28 10:24:18 stonehill kernel: usb.c: new USB bus registered,
assigned bus number 1
Jan 28 10:24:18 stonehill kernel: Product: USB UHCI Root Hub
Jan 28 10:24:18 stonehill kernel: SerialNumber: 1820
Jan 28 10:24:18 stonehill kernel: hub.c: USB hub found
Jan 28 10:24:18 stonehill kernel: hub.c: 2 ports detected
Jan 28 10:24:19 stonehill tammi 28 10:24:18 atd: atd startup succeeded
Jan 28 10:24:19 stonehill kernel: usb-uhci.c: v1.268:USB Universal Host
Controller Interface driver
.
.
.Jan 28 10:25:53 stonehill kernel: hub.c: USB new device connect on
bus1/1, assigned device number 2
Jan 28 10:25:53 stonehill kernel: Product: General Purpose USB Hub
Jan 28 10:25:53 stonehill kernel: hub.c: USB hub found
Jan 28 10:25:53 stonehill kernel: hub.c: 2 ports detected
Jan 28 10:25:53 stonehill /sbin/hotplug: arguments (usb) env
(PWD=/etc/hotplug HOSTNAME=stonehill.localdomain
DEVICE=/proc/bus/usb/001/002 ACTION=add DEBUG=kernel
MACHTYPE=i386-redhat-linux-gnu OLDPWD=/ DEVFS=/proc/bus/usb TYPE=9/0/0
SHLVL=1 SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux-gnu HOME=/ TERM=dumb
PATH=/bin:/sbin:/usr/sbin:/usr/bin PRODUCT=451/2036/101 _=/usr/bin/env)
Jan 28 10:25:53 stonehill /sbin/hotplug: invoke /etc/hotplug/usb.agent ()
Jan 28 10:25:53 stonehill kernel: hub.c: USB new device connect on
bus1/1/1, assigned device number 3
Jan 28 10:25:53 stonehill kernel: Manufacturer: Konica
Jan 28 10:25:53 stonehill kernel: Product: KD-200Z
Jan 28 10:25:53 stonehill kernel: usb.c: USB device 3 (vend/prod
0x4c8/0x723) is not claimed by any active driver.
Jan 28 10:25:53 stonehill kernel: Length = 18
Jan 28 10:25:53 stonehill kernel: DescriptorType = 01
Jan 28 10:25:53 stonehill kernel: USB version = 1.10
Jan 28 10:25:53 stonehill kernel: Vendor:Product = 04c8:0723
Jan 28 10:25:53 stonehill kernel: MaxPacketSize0 = 64
Jan 28 10:25:53 stonehill kernel: NumConfigurations = 1
Jan 28 10:25:53 stonehill kernel: Device version = 1.00
Jan 28 10:25:53 stonehill kernel: Device Class:SubClass:Protocol =
00:00:00
Jan 28 10:25:53 stonehill kernel: Per-interface classes
Jan 28 10:25:53 stonehill kernel: Configuration:
Jan 28 10:25:53 stonehill kernel: bLength = 9
Jan 28 10:25:53 stonehill kernel: bDescriptorType = 02
Jan 28 10:25:53 stonehill kernel: wTotalLength = 0020
Jan 28 10:25:53 stonehill kernel: bNumInterfaces = 01
Jan 28 10:25:53 stonehill /etc/hotplug/usb.agent: Modprobe and setup
usbcore for USB product 451/2036/101
Jan 28 10:25:53 stonehill kernel: bConfigurationValue = 01
Jan 28 10:25:53 stonehill kernel: iConfiguration = 03
Jan 28 10:25:53 stonehill kernel: bmAttributes = c0
Jan 28 10:25:53 stonehill kernel: MaxPower = 100mA
Jan 28 10:25:53 stonehill kernel:
Jan 28 10:25:53 stonehill kernel: Interface: 0
Jan 28 10:25:53 stonehill kernel: Alternate Setting: 0
Jan 28 10:25:53 stonehill kernel: bLength = 9
Jan 28 10:25:53 stonehill kernel: bDescriptorType = 04
Jan 28 10:25:53 stonehill kernel: bInterfaceNumber = 00
Jan 28 10:25:53 stonehill kernel: bAlternateSetting = 00
Jan 28 10:25:53 stonehill kernel: bNumEndpoints = 02
Jan 28 10:25:53 stonehill kernel: bInterface Class:SubClass:Protocol
= 08:06:50
Jan 28 10:25:53 stonehill kernel: iInterface = 04
Jan 28 10:25:53 stonehill /sbin/hotplug: arguments (usb) env
(PWD=/etc/hotplug HOSTNAME=stonehill.localdomain
DEVICE=/proc/bus/usb/001/003 INTERFACE=8/6/80 ACTION=add DEBUG=kernel
MACHTYPE=i386-redhat-linux-gnu OLDPWD=/ DEVFS=/proc/bus/usb TYPE=0/0/0
SHLVL=1 SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux-gnu HOME=/ TERM=dumb
PATH=/bin:/sbin:/usr/sbin:/usr/bin PRODUCT=4c8/723/100 _=/usr/bin/env)
Jan 28 10:25:53 stonehill kernel: Endpoint:
Jan 28 10:25:53 stonehill /etc/hotplug/usb.agent: Modprobe and setup
usbcore for USB product 451/2036/101
Jan 28 10:25:53 stonehill /sbin/hotplug: invoke /etc/hotplug/usb.agent ()
Jan 28 10:25:53 stonehill kernel: bLength = 7
Jan 28 10:25:53 stonehill kernel: bDescriptorType = 05
Jan 28 10:25:53 stonehill kernel: bEndpointAddress = 81 (in)
Jan 28 10:25:53 stonehill kernel: bmAttributes = 02 (Bulk)
Jan 28 10:25:53 stonehill kernel: wMaxPacketSize = 0040
Jan 28 10:25:53 stonehill kernel: bInterval = 00
Jan 28 10:25:53 stonehill kernel: Endpoint:
Jan 28 10:25:53 stonehill kernel: bLength = 7
Jan 28 10:25:53 stonehill kernel: bDescriptorType = 05
Jan 28 10:25:53 stonehill kernel: bEndpointAddress = 01 (out)
Jan 28 10:25:53 stonehill kernel: bmAttributes = 02 (Bulk)
Jan 28 10:25:53 stonehill kernel: wMaxPacketSize = 0040
Jan 28 10:25:53 stonehill kernel: bInterval = 00
Jan 28 10:25:53 stonehill kernel: usb-uhci.c: ENXIO 80000280, flags 0,
urb cb26f2f0, burb cb26f370
Jan 28 10:25:53 stonehill kernel: hub.c: get_port_status failed (err = -6)
Jan 28 10:25:53 stonehill kernel: usb-uhci.c: ENXIO 80000280, flags 0,
urb cb26f2f0, burb cb26f370
Jan 28 10:25:53 stonehill kernel: hub.c: get_hub_status failed
Jan 28 10:25:53 stonehill /etc/hotplug/usb.agent: Modprobe and setup
usb-storage for USB product 4c8/723/100
Jan 28 10:25:54 stonehill kernel: SCSI subsystem driver Revision: 1.00
Jan 28 10:25:54 stonehill kernel: Initializing USB Mass Storage driver...
Jan 28 10:25:54 stonehill kernel: usb.c: registered new driver usb-storage
Jan 28 10:25:54 stonehill kernel: scsi0 : SCSI emulation for USB Mass
Storage devices
Jan 28 10:25:54 stonehill kernel: Vendor: Konica Model: KD-200Z
Rev: 1.00
Jan 28 10:25:54 stonehill kernel: Type: Direct-Access
ANSI SCSI revision: 02
Jan 28 10:25:54 stonehill kernel: USB Mass Storage support registered.
Jan 28 10:27:10 stonehill kernel: Attached scsi removable disk sda at
scsi0, channel 0, id 0, lun 0
Jan 28 10:27:10 stonehill kernel: SCSI device sda: 15569 512-byte hdwr
sectors (8 MB)
Jan 28 10:27:10 stonehill kernel: sda: Write Protect is off
Jan 28 10:27:10 stonehill kernel: sda:<7>usb-storage: queuecommand() called
Jan 28 10:27:10 stonehill kernel: sda1
Jan 28 10:27:10 stonehill kernel: SCSI error: host 0 id 0 lun 0 return
code = 8000002
Jan 28 10:27:10 stonehill kernel: ^ISense class 7, sense error 0,
extended sense 3
Jan 28 10:27:10 stonehill kernel: SCSI device sda: 15569 512-byte hdwr
sectors (8 MB)
Jan 28 10:27:10 stonehill kernel: sda: Write Protect is off
Jan 28 10:27:10 stonehill kernel: sda: I/O error: dev 08:00, sector 0
Jan 28 10:27:10 stonehill kernel: I/O error: dev 08:00, sector 0
Jan 28 10:27:10 stonehill kernel: unable to read partition table
</clip>
I hope someone could help me.
thanks Jarno
--
Jarno Saarinen
p. +358 40 552 4004
s154994@cc.tut.fi
_______________________________________________
Linux-usb-users@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic