[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-usb
Subject: USB suspend - usb wifi start act weird
From: okias <d.okias () gmail ! com>
Date: 2011-02-21 19:54:12
Message-ID: AANLkTi=KoKQ4sxEqERM3k+avqEJ2cLUYy6kJ3YYHghdJ () mail ! gmail ! com
[Download RAW message or body]
Hello.
Wifi goes wrong in last lines...
Other (but I guess it's related) is that, sometimes after connecting
USB device, whole USB subsystem fail and I have to reboot laptop.
Wifi started had problems around 2.6.38, usb problem is here almost
from beggining.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-rc5-00100-g0cc9d52-dirty (@) (gcc
version 4.5.2 (Gentoo 4.5.2 p1.0, pie-0.4.5) ) #2 SMP Sun Feb 20
02:21:22 CET 2011
[ 0.000000] Command line: root=/dev/sda2 quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000057e70000 (usable)
[ 0.000000] BIOS-e820: 0000000057e70000 - 0000000057e82000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000057e82000 - 0000000057e84000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000057e84000 - 0000000060000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: TOSHIBA Satellite A210/SB600, BIOS 1.80 08/04/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x57e70 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f83b0] f83b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000057e70000
[ 0.000000] 0000000000 - 0057e00000 page 2M
[ 0.000000] 0057e00000 - 0057e70000 page 4k
[ 0.000000] kernel direct mapping tables up to 57e70000 @ 1fffc000-20000000
[ 0.000000] ACPI: RSDP 00000000000f82f0 00024 (v02 TOSINV)
[ 0.000000] ACPI: XSDT 0000000057e7a3ae 00054 (v01 TOSINV TOSINV00
06040000 INV 00000000)
[ 0.000000] ACPI: FACP 0000000057e81a8c 000F4 (v03 ATI Herring
06040000 ATI 000F4240)
[ 0.000000] ACPI: DSDT 0000000057e7a402 0768A (v01 TOSINV SB600
06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0000000057e83fc0 00040
[ 0.000000] ACPI: SSDT 0000000057e81bf4 001CE (v01 PTLTD POWERNOW
06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 0000000057e81dc2 00054 (v01 TOSINV ? APIC
06040000 INV 00000000)
[ 0.000000] ACPI: SLIC 0000000057e81e16 00176 (v01 TOSINV TOSINV00
06040000 INV 00000000)
[ 0.000000] ACPI: MCFG 0000000057e81f8c 0003C (v01 TOSINV MCFG
06040000 INV 00000000)
[ 0.000000] ACPI: HPET 0000000057e81fc8 00038 (v01 PTLTD HPETTBL
06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea00013fffff] PMD ->
[ffff880056000000-ffff8800573fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00057e70
[ 0.000000] On node 0 totalpages: 359933
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3919 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 4867 pages used for memmap
[ 0.000000] DMA32 zone: 351085 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 60000000 (gap:
60000000:80000000)
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 23 pages/cpu @ffff880057c00000 s73472
r0 d20736 u1048576
[ 0.000000] pcpu-alloc: s73472 r0 d20736 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 355004
[ 0.000000] Kernel command line: root=/dev/sda2 quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 6e8000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 1406060k/1440192k available (6233k kernel code,
460k absent, 33672k reserved, 2603k data, 440k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1795.857 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.001005] Calibrating delay loop (skipped), value calculated
using timer frequency.. 3591.71 BogoMIPS (lpj=1795857)
[ 0.001010] pid_max: default: 32768 minimum: 301
[ 0.002046] Mount-cache hash table entries: 256
[ 0.002194] Initializing cgroup subsys ns
[ 0.002196] ns_cgroup deprecated: consider using the
'clone_children' flag without the ns_cgroup.
[ 0.002200] Initializing cgroup subsys cpuacct
[ 0.002205] Initializing cgroup subsys freezer
[ 0.002233] tseg: 0057f00000
[ 0.002235] CPU: Physical Processor ID: 0
[ 0.002237] CPU: Processor Core ID: 0
[ 0.002239] mce: CPU supports 5 MCE banks
[ 0.002249] using C1E aware idle routine
[ 0.002291] ACPI: Core revision 20110112
[ 0.002295] TOSHIBA Satellite detected - force copy of DSDT to local memory
[ 0.002412] ACPI: Forced DSDT copy: length 0x0768A copied locally,
original unmapped
[ 0.006060] Setting APIC routing to flat
[ 0.006377] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.006999] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.006999] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.006999] ..... (found apic 0 pin 0) ...
[ 0.017030] ....... works.
[ 0.017032] CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 stepping 01
[ 0.017998] Performance Events: AMD PMU driver.
[ 0.017998] ... version: 0
[ 0.017998] ... bit width: 48
[ 0.017998] ... generic registers: 4
[ 0.017998] ... value mask: 0000ffffffffffff
[ 0.017998] ... max period: 00007fffffffffff
[ 0.017998] ... fixed-purpose events: 0
[ 0.017998] ... event mask: 000000000000000f
[ 0.017998] MCE: In-kernel MCE decoding enabled.
[ 0.017998] Booting Node 0, Processors #1 Ok.
[ 0.001999] System has AMD C1E enabled
[ 0.001999] Switch to broadcast mode on CPU1
[ 0.088075] Brought up 2 CPUs
[ 0.088077] Total of 2 processors activated (7183.14 BogoMIPS).
[ 0.088213] Switch to broadcast mode on CPU0
[ 0.088213] NET: Registered protocol family 16
[ 0.089043] node 0 link 0: io port [1000, fffff]
[ 0.089043] TOM: 0000000060000000 aka 1536M
[ 0.089043] node 0 link 0: mmio [f8100000, ffffffff]
[ 0.089043] node 0 link 0: mmio [f8000000, f80fffff]
[ 0.089043] node 0 link 0: mmio [f8000000, f7ffffff]
[ 0.089043] node 0 link 0: mmio [f0000000, f7ffffff]
[ 0.089043] node 0 link 0: mmio [a0000, bffff]
[ 0.089043] node 0 link 0: mmio [f0000000, efffffff]
[ 0.089043] node 0 link 0: mmio [e0000000, efffffff]
[ 0.089044] node 0 link 0: mmio [60000000, dfffffff]
[ 0.089047] bus: [00, ff] on node 0 link 0
[ 0.089051] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.089053] bus: 00 index 1 [mem 0x60000000-0xfcffffffff]
[ 0.089056] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.089080] ACPI: bus type pci registered
[ 0.089094] PCI: MMCONFIG for domain 0000 [bus 00-18] at [mem
0xe0000000-0xe18fffff] (base 0xe0000000)
[ 0.089094] PCI: MMCONFIG at [mem 0xe0000000-0xe18fffff] reserved in E820
[ 0.091636] PCI: Using configuration type 1 for base access
[ 0.105046] bio: create slab <bio-0> at 0
[ 0.105181] ACPI: EC: Look up EC in DSDT
[ 0.107575] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.260001] ACPI: Interpreter enabled
[ 0.260005] ACPI: (supports S0 S3 S4 S5)
[ 0.260026] ACPI: Using IOAPIC for interrupt routing
[ 0.281036] ACPI: Power Resource [PFA1] (off)
[ 0.281111] ACPI: EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62
[ 0.281111] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.282354] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.284087] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.284092] pci_root PNP0A08:00: host bridge window [mem
0x000d0000-0x000d1fff]
[ 0.284095] pci_root PNP0A08:00: host bridge window [mem
0x000d2000-0x000d3fff]
[ 0.284098] pci_root PNP0A08:00: host bridge window [mem
0x000d4000-0x000d5fff]
[ 0.284101] pci_root PNP0A08:00: host bridge window [mem
0x000d6000-0x000d7fff]
[ 0.284104] pci_root PNP0A08:00: host bridge window [mem
0x000d8000-0x000d9fff]
[ 0.284107] pci_root PNP0A08:00: host bridge window [mem
0x000da000-0x000dbfff]
[ 0.284110] pci_root PNP0A08:00: host bridge window [mem
0x000dc000-0x000ddfff]
[ 0.284113] pci_root PNP0A08:00: host bridge window [mem
0x000de000-0x000dffff]
[ 0.284116] pci_root PNP0A08:00: host bridge window [mem
0x60000000-0xdfffffff]
[ 0.284119] pci_root PNP0A08:00: host bridge window [mem
0xf0000000-0xffffffff]
[ 0.284123] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.284126] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.284142] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600
[ 0.284173] pci 0000:00:01.0: [1002:7912] type 1 class 0x000604
[ 0.284211] pci 0000:00:04.0: [1002:7914] type 1 class 0x000604
[ 0.284237] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.284241] pci 0000:00:04.0: PME# disabled
[ 0.284255] pci 0000:00:05.0: [1002:7915] type 1 class 0x000604
[ 0.284281] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.284284] pci 0000:00:05.0: PME# disabled
[ 0.284298] pci 0000:00:06.0: [1002:7916] type 1 class 0x000604
[ 0.284324] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.284327] pci 0000:00:06.0: PME# disabled
[ 0.284363] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101
[ 0.284383] pci 0000:00:12.0: reg 10: [io 0x8440-0x8447]
[ 0.284394] pci 0000:00:12.0: reg 14: [io 0x8434-0x8437]
[ 0.284406] pci 0000:00:12.0: reg 18: [io 0x8438-0x843f]
[ 0.284417] pci 0000:00:12.0: reg 1c: [io 0x8430-0x8433]
[ 0.284428] pci 0000:00:12.0: reg 20: [io 0x8400-0x840f]
[ 0.284440] pci 0000:00:12.0: reg 24: [mem 0xf8609000-0xf86093ff]
[ 0.284463] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.284494] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
[ 0.284510] pci 0000:00:13.0: reg 10: [mem 0xf8604000-0xf8604fff]
[ 0.284581] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
[ 0.284596] pci 0000:00:13.1: reg 10: [mem 0xf8605000-0xf8605fff]
[ 0.284667] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
[ 0.284682] pci 0000:00:13.2: reg 10: [mem 0xf8606000-0xf8606fff]
[ 0.284752] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
[ 0.284768] pci 0000:00:13.3: reg 10: [mem 0xf8607000-0xf8607fff]
[ 0.284838] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
[ 0.284853] pci 0000:00:13.4: reg 10: [mem 0xf8608000-0xf8608fff]
[ 0.284929] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
[ 0.284951] pci 0000:00:13.5: reg 10: [mem 0xf8609400-0xf86094ff]
[ 0.285034] pci 0000:00:13.5: supports D1 D2
[ 0.285037] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.285042] pci 0000:00:13.5: PME# disabled
[ 0.285066] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.285091] pci 0000:00:14.0: reg 10: [io 0x8410-0x841f]
[ 0.285174] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
[ 0.285189] pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7]
[ 0.285201] pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7]
[ 0.285212] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.285223] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.285235] pci 0000:00:14.1: reg 20: [io 0x8420-0x842f]
[ 0.285276] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.285301] pci 0000:00:14.2: reg 10: [mem 0xf8600000-0xf8603fff 64bit]
[ 0.285365] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.285370] pci 0000:00:14.2: PME# disabled
[ 0.285386] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
[ 0.285469] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.285519] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.285538] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.285554] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.285571] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.285618] pci 0000:01:05.0: [1002:791f] type 0 class 0x000300
[ 0.285629] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.285637] pci 0000:01:05.0: reg 18: [mem 0xf8100000-0xf810ffff 64bit]
[ 0.285643] pci 0000:01:05.0: reg 20: [io 0x9000-0x90ff]
[ 0.285649] pci 0000:01:05.0: reg 24: [mem 0xf8000000-0xf80fffff]
[ 0.285662] pci 0000:01:05.0: supports D1 D2
[ 0.285678] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.285682] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.285686] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf81fffff]
[ 0.285691] pci 0000:00:01.0: bridge window [mem
0xf0000000-0xf7ffffff 64bit pref]
[ 0.285716] pci 0000:00:04.0: PCI bridge to [bus 02-07]
[ 0.285720] pci 0000:00:04.0: bridge window [io 0x0000-0x0000] (disabled)
[ 0.285724] pci 0000:00:04.0: bridge window [mem
0x00000000-0x000fffff] (disabled)
[ 0.285729] pci 0000:00:04.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.285771] pci 0000:08:00.0: [10ec:8136] type 0 class 0x000200
[ 0.285787] pci 0000:08:00.0: reg 10: [io 0xa000-0xa0ff]
[ 0.285814] pci 0000:08:00.0: reg 18: [mem 0xf8200000-0xf8200fff 64bit]
[ 0.285844] pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.285882] pci 0000:08:00.0: supports D1 D2
[ 0.285885] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.285890] pci 0000:08:00.0: PME# disabled
[ 0.285905] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 0.285915] pci 0000:00:05.0: PCI bridge to [bus 08-0d]
[ 0.285919] pci 0000:00:05.0: bridge window [io 0xa000-0xafff]
[ 0.285923] pci 0000:00:05.0: bridge window [mem 0xf8200000-0xf82fffff]
[ 0.285927] pci 0000:00:05.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.285952] pci 0000:00:06.0: PCI bridge to [bus 0e-13]
[ 0.285956] pci 0000:00:06.0: bridge window [io 0x0000-0x0000] (disabled)
[ 0.285960] pci 0000:00:06.0: bridge window [mem
0x00000000-0x000fffff] (disabled)
[ 0.285965] pci 0000:00:06.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.286004] pci 0000:14:06.0: [1180:0832] type 0 class 0x000c00
[ 0.286021] pci 0000:14:06.0: proprietary Ricoh MMC controller
disabled (via firewire function)
[ 0.286024] pci 0000:14:06.0: MMC cards are now supported by
standard SDHCI controller
[ 0.286042] pci 0000:14:06.0: reg 10: [mem 0xf8300000-0xf83007ff]
[ 0.286133] pci 0000:14:06.0: supports D1 D2
[ 0.286136] pci 0000:14:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.286141] pci 0000:14:06.0: PME# disabled
[ 0.286165] pci 0000:14:06.1: [1180:0822] type 0 class 0x000805
[ 0.286189] pci 0000:14:06.1: reg 10: [mem 0xf8300800-0xf83008ff]
[ 0.286280] pci 0000:14:06.1: supports D1 D2
[ 0.286282] pci 0000:14:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.286288] pci 0000:14:06.1: PME# disabled
[ 0.286311] pci 0000:14:06.2: [1180:0592] type 0 class 0x000880
[ 0.286335] pci 0000:14:06.2: reg 10: [mem 0xf8301000-0xf83010ff]
[ 0.286427] pci 0000:14:06.2: supports D1 D2
[ 0.286429] pci 0000:14:06.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.286435] pci 0000:14:06.2: PME# disabled
[ 0.286459] pci 0000:14:06.3: [1180:0852] type 0 class 0x000880
[ 0.286482] pci 0000:14:06.3: reg 10: [mem 0xf8301400-0xf83014ff]
[ 0.286574] pci 0000:14:06.3: supports D1 D2
[ 0.286577] pci 0000:14:06.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.286582] pci 0000:14:06.3: PME# disabled
[ 0.286639] pci 0000:00:14.4: PCI bridge to [bus 14-19] (subtractive decode)
[ 0.286645] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.286651] pci 0000:00:14.4: bridge window [mem 0xf8300000-0xf83fffff]
[ 0.286656] pci 0000:00:14.4: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.286659] pci 0000:00:14.4: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[ 0.286663] pci 0000:00:14.4: bridge window [mem
0x000d0000-0x000d1fff] (subtractive decode)
[ 0.286666] pci 0000:00:14.4: bridge window [mem
0x000d2000-0x000d3fff] (subtractive decode)
[ 0.286669] pci 0000:00:14.4: bridge window [mem
0x000d4000-0x000d5fff] (subtractive decode)
[ 0.286672] pci 0000:00:14.4: bridge window [mem
0x000d6000-0x000d7fff] (subtractive decode)
[ 0.286676] pci 0000:00:14.4: bridge window [mem
0x000d8000-0x000d9fff] (subtractive decode)
[ 0.286679] pci 0000:00:14.4: bridge window [mem
0x000da000-0x000dbfff] (subtractive decode)
[ 0.286682] pci 0000:00:14.4: bridge window [mem
0x000dc000-0x000ddfff] (subtractive decode)
[ 0.286686] pci 0000:00:14.4: bridge window [mem
0x000de000-0x000dffff] (subtractive decode)
[ 0.286689] pci 0000:00:14.4: bridge window [mem
0x60000000-0xdfffffff] (subtractive decode)
[ 0.286692] pci 0000:00:14.4: bridge window [mem
0xf0000000-0xffffffff] (subtractive decode)
[ 0.286695] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.286699] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.286717] pci_bus 0000:00: on NUMA node 0
[ 0.286722] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.286817] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.286860] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.286902] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.286947] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB4_._PRT]
[ 0.287019] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT]
[ 0.287108] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.287142] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.287178] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.293070] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.293121] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.293167] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.293219] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.293264] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.293311] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.293356] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.293403] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.294039] vgaarb: device added:
PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.294039] vgaarb: loaded
[ 0.294103] SCSI subsystem initialized
[ 0.294103] libata version 3.00 loaded.
[ 0.294103] usbcore: registered new interface driver usbfs
[ 0.294103] usbcore: registered new interface driver hub
[ 0.294103] usbcore: registered new device driver usb
[ 0.295021] wmi: Mapper loaded
[ 0.295021] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.295021] PCI: Using ACPI for IRQ routing
[ 0.295021] PCI: pci_cache_line_size set to 64 bytes
[ 0.295132] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.295135] reserve RAM buffer: 0000000057e70000 - 0000000057ffffff
[ 0.295156] Bluetooth: Core ver 2.15
[ 0.295156] NET: Registered protocol family 31
[ 0.295156] Bluetooth: HCI device and connection manager initialized
[ 0.295156] Bluetooth: HCI socket layer initialized
[ 0.296068] cfg80211: Calling CRDA to update world regulatory domain
[ 0.296240] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.296240] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.298009] Switching to clocksource hpet
[ 0.298071] FS-Cache: Loaded
[ 0.298111] CacheFiles: Loaded
[ 0.298161] pnp: PnP ACPI init
[ 0.298177] ACPI: bus type pnp registered
[ 0.298385] Switched to NOHz mode on CPU #1
[ 0.298387] Switched to NOHz mode on CPU #0
[ 0.299992] pnp 00:00: [bus 00-ff]
[ 0.299996] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.299999] pnp 00:00: [mem 0x000c0000-0x000c1fff window]
[ 0.300014] pnp 00:00: [mem 0x000c2000-0x000c3fff window]
[ 0.300017] pnp 00:00: [mem 0x000c4000-0x000c5fff window]
[ 0.300020] pnp 00:00: [mem 0x000c6000-0x000c7fff window]
[ 0.300023] pnp 00:00: [mem 0x000c8000-0x000c9fff window]
[ 0.300026] pnp 00:00: [mem 0x000ca000-0x000cbfff window]
[ 0.300029] pnp 00:00: [mem 0x000cc000-0x000cdfff window]
[ 0.300032] pnp 00:00: [mem 0x000ce000-0x000cffff window]
[ 0.300035] pnp 00:00: [mem 0x000d0000-0x000d1fff window]
[ 0.300038] pnp 00:00: [mem 0x000d2000-0x000d3fff window]
[ 0.300041] pnp 00:00: [mem 0x000d4000-0x000d5fff window]
[ 0.300044] pnp 00:00: [mem 0x000d6000-0x000d7fff window]
[ 0.300047] pnp 00:00: [mem 0x000d8000-0x000d9fff window]
[ 0.300050] pnp 00:00: [mem 0x000da000-0x000dbfff window]
[ 0.300054] pnp 00:00: [mem 0x000dc000-0x000ddfff window]
[ 0.300057] pnp 00:00: [mem 0x000de000-0x000dffff window]
[ 0.300060] pnp 00:00: [mem 0x000e0000-0x000e1fff window]
[ 0.300063] pnp 00:00: [mem 0x000e2000-0x000e3fff window]
[ 0.300066] pnp 00:00: [mem 0x000e4000-0x000e5fff window]
[ 0.300069] pnp 00:00: [mem 0x000e6000-0x000e7fff window]
[ 0.300073] pnp 00:00: [mem 0x000e8000-0x000e9fff window]
[ 0.300076] pnp 00:00: [mem 0x000ea000-0x000ebfff window]
[ 0.300079] pnp 00:00: [mem 0x000ec000-0x000edfff window]
[ 0.300082] pnp 00:00: [mem 0x000ee000-0x000effff window]
[ 0.300085] pnp 00:00: [mem 0x60000000-0xdfffffff window]
[ 0.300088] pnp 00:00: [mem 0xf0000000-0xffffffff window]
[ 0.300092] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.300095] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.300098] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.300258] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08
PNP0a03 (active)
[ 0.300321] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.300324] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.300466] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.300470] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.300474] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.300878] pnp 00:02: [io 0x0000-0x001f]
[ 0.300881] pnp 00:02: [io 0x0080-0x008f]
[ 0.300884] pnp 00:02: [io 0x00c0-0x00df]
[ 0.300887] pnp 00:02: [dma 4]
[ 0.300996] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.301047] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.301060] pnp 00:03: [irq 13]
[ 0.301161] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.301176] pnp 00:04: [io 0x0070-0x0071]
[ 0.301182] pnp 00:04: [irq 8]
[ 0.301278] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.301290] pnp 00:05: [io 0x0061]
[ 0.301390] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.301404] pnp 00:06: [io 0x0060]
[ 0.301406] pnp 00:06: [io 0x0064]
[ 0.301412] pnp 00:06: [irq 1]
[ 0.301512] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.301527] pnp 00:07: [irq 12]
[ 0.301633] pnp 00:07: Plug and Play ACPI device, IDs SYN1909
SYN1900 SYN0002 PNP0f13 (active)
[ 0.301655] pnp 00:08: [io 0x0022-0x0023]
[ 0.301658] pnp 00:08: [io 0x002e-0x002f]
[ 0.301661] pnp 00:08: [io 0x0072-0x0073]
[ 0.301663] pnp 00:08: [io 0x1080]
[ 0.301666] pnp 00:08: [io 0x00b0-0x00b1]
[ 0.301668] pnp 00:08: [io 0x0092]
[ 0.301670] pnp 00:08: [io 0x0068]
[ 0.301673] pnp 00:08: [io 0x006c]
[ 0.301675] pnp 00:08: [io 0x0220-0x022f]
[ 0.301678] pnp 00:08: [io 0x040b]
[ 0.301680] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.301683] pnp 00:08: [io 0x04d6]
[ 0.301685] pnp 00:08: [io 0x0530-0x0537]
[ 0.301688] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.301690] pnp 00:08: [io 0x0c14]
[ 0.301693] pnp 00:08: [io 0x0c50-0x0c52]
[ 0.301696] pnp 00:08: [io 0x0c6c]
[ 0.301698] pnp 00:08: [io 0x0c6f]
[ 0.301700] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.301703] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.301705] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.301708] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.301711] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.301713] pnp 00:08: [io 0xfe00]
[ 0.301716] pnp 00:08: [io 0x8000-0x805f]
[ 0.301719] pnp 00:08: [io 0x8100-0x81ff window]
[ 0.301722] pnp 00:08: [io 0x8200-0x82ff window]
[ 0.301725] pnp 00:08: [io 0x0f40-0x0f47]
[ 0.301727] pnp 00:08: [io 0x087f]
[ 0.301906] system 00:08: [io 0x1080] has been reserved
[ 0.301910] system 00:08: [io 0x0220-0x022f] has been reserved
[ 0.301914] system 00:08: [io 0x040b] has been reserved
[ 0.301917] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.301921] system 00:08: [io 0x04d6] has been reserved
[ 0.301924] system 00:08: [io 0x0530-0x0537] has been reserved
[ 0.301928] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.301934] system 00:08: [io 0x0c14] has been reserved
[ 0.301937] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 0.301940] system 00:08: [io 0x0c6c] has been reserved
[ 0.301943] system 00:08: [io 0x0c6f] has been reserved
[ 0.301946] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.301950] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.301953] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.301956] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.301959] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.301962] system 00:08: [io 0xfe00] has been reserved
[ 0.301966] system 00:08: [io 0x8000-0x805f] has been reserved
[ 0.301969] system 00:08: [io 0x8100-0x81ff window] has been reserved
[ 0.301973] system 00:08: [io 0x8200-0x82ff window] has been reserved
[ 0.301976] system 00:08: [io 0x0f40-0x0f47] has been reserved
[ 0.301979] system 00:08: [io 0x087f] has been reserved
[ 0.301983] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.302073] pnp 00:09: [mem 0x000e0000-0x000fffff]
[ 0.302079] pnp 00:09: [mem 0xff800000-0xff80ffff]
[ 0.302082] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.302084] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.302243] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.302247] system 00:09: [mem 0xff800000-0xff80ffff] has been reserved
[ 0.302251] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.302255] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.302373] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[ 0.302488] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.303988] pnp: PnP ACPI: found 11 devices
[ 0.303990] ACPI: ACPI bus type pnp unregistered
[ 0.315135] pci 0000:00:04.0: BAR 8: assigned [mem 0x60000000-0x601fffff]
[ 0.315143] pci 0000:00:04.0: BAR 9: assigned [mem
0x60200000-0x603fffff 64bit pref]
[ 0.315149] pci 0000:00:05.0: BAR 9: assigned [mem
0x60400000-0x604fffff pref]
[ 0.315154] pci 0000:00:06.0: BAR 8: assigned [mem 0x60500000-0x606fffff]
[ 0.315160] pci 0000:00:06.0: BAR 9: assigned [mem
0x60700000-0x608fffff 64bit pref]
[ 0.315166] pci 0000:00:04.0: BAR 7: assigned [io 0x2000-0x2fff]
[ 0.315171] pci 0000:00:06.0: BAR 7: assigned [io 0x3000-0x3fff]
[ 0.315175] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.315178] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.315182] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf81fffff]
[ 0.315186] pci 0000:00:01.0: bridge window [mem
0xf0000000-0xf7ffffff 64bit pref]
[ 0.315190] pci 0000:00:04.0: PCI bridge to [bus 02-07]
[ 0.315193] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.315197] pci 0000:00:04.0: bridge window [mem 0x60000000-0x601fffff]
[ 0.315201] pci 0000:00:04.0: bridge window [mem
0x60200000-0x603fffff 64bit pref]
[ 0.315206] pci 0000:08:00.0: BAR 6: assigned [mem
0x60400000-0x6041ffff pref]
[ 0.315209] pci 0000:00:05.0: PCI bridge to [bus 08-0d]
[ 0.315213] pci 0000:00:05.0: bridge window [io 0xa000-0xafff]
[ 0.315216] pci 0000:00:05.0: bridge window [mem 0xf8200000-0xf82fffff]
[ 0.315220] pci 0000:00:05.0: bridge window [mem
0x60400000-0x604fffff pref]
[ 0.315224] pci 0000:00:06.0: PCI bridge to [bus 0e-13]
[ 0.315227] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff]
[ 0.315231] pci 0000:00:06.0: bridge window [mem 0x60500000-0x606fffff]
[ 0.315235] pci 0000:00:06.0: bridge window [mem
0x60700000-0x608fffff 64bit pref]
[ 0.315241] pci 0000:00:14.4: PCI bridge to [bus 14-19]
[ 0.315243] pci 0000:00:14.4: bridge window [io disabled]
[ 0.315252] pci 0000:00:14.4: bridge window [mem 0xf8300000-0xf83fffff]
[ 0.315257] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.315273] pci 0000:00:04.0: enabling device (0000 -> 0003)
[ 0.315277] pci 0000:00:04.0: setting latency timer to 64
[ 0.315282] pci 0000:00:05.0: setting latency timer to 64
[ 0.315287] pci 0000:00:06.0: enabling device (0000 -> 0003)
[ 0.315291] pci 0000:00:06.0: setting latency timer to 64
[ 0.315300] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
[ 0.315303] pci_bus 0000:00: resource 5 [mem 0x000d0000-0x000d1fff]
[ 0.315306] pci_bus 0000:00: resource 6 [mem 0x000d2000-0x000d3fff]
[ 0.315308] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d5fff]
[ 0.315311] pci_bus 0000:00: resource 8 [mem 0x000d6000-0x000d7fff]
[ 0.315314] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000d9fff]
[ 0.315316] pci_bus 0000:00: resource 10 [mem 0x000da000-0x000dbfff]
[ 0.315319] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000ddfff]
[ 0.315322] pci_bus 0000:00: resource 12 [mem 0x000de000-0x000dffff]
[ 0.315325] pci_bus 0000:00: resource 13 [mem 0x60000000-0xdfffffff]
[ 0.315328] pci_bus 0000:00: resource 14 [mem 0xf0000000-0xffffffff]
[ 0.315330] pci_bus 0000:00: resource 15 [io 0x0000-0x0cf7]
[ 0.315333] pci_bus 0000:00: resource 16 [io 0x0d00-0xffff]
[ 0.315336] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.315340] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf81fffff]
[ 0.315342] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff
64bit pref]
[ 0.315346] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.315348] pci_bus 0000:02: resource 1 [mem 0x60000000-0x601fffff]
[ 0.315352] pci_bus 0000:02: resource 2 [mem 0x60200000-0x603fffff
64bit pref]
[ 0.315355] pci_bus 0000:08: resource 0 [io 0xa000-0xafff]
[ 0.315358] pci_bus 0000:08: resource 1 [mem 0xf8200000-0xf82fffff]
[ 0.315361] pci_bus 0000:08: resource 2 [mem 0x60400000-0x604fffff pref]
[ 0.315364] pci_bus 0000:0e: resource 0 [io 0x3000-0x3fff]
[ 0.315367] pci_bus 0000:0e: resource 1 [mem 0x60500000-0x606fffff]
[ 0.315370] pci_bus 0000:0e: resource 2 [mem 0x60700000-0x608fffff
64bit pref]
[ 0.315373] pci_bus 0000:14: resource 1 [mem 0xf8300000-0xf83fffff]
[ 0.315376] pci_bus 0000:14: resource 4 [mem 0x000a0000-0x000bffff]
[ 0.315379] pci_bus 0000:14: resource 5 [mem 0x000d0000-0x000d1fff]
[ 0.315381] pci_bus 0000:14: resource 6 [mem 0x000d2000-0x000d3fff]
[ 0.315384] pci_bus 0000:14: resource 7 [mem 0x000d4000-0x000d5fff]
[ 0.315387] pci_bus 0000:14: resource 8 [mem 0x000d6000-0x000d7fff]
[ 0.315390] pci_bus 0000:14: resource 9 [mem 0x000d8000-0x000d9fff]
[ 0.315392] pci_bus 0000:14: resource 10 [mem 0x000da000-0x000dbfff]
[ 0.315395] pci_bus 0000:14: resource 11 [mem 0x000dc000-0x000ddfff]
[ 0.315398] pci_bus 0000:14: resource 12 [mem 0x000de000-0x000dffff]
[ 0.315401] pci_bus 0000:14: resource 13 [mem 0x60000000-0xdfffffff]
[ 0.315404] pci_bus 0000:14: resource 14 [mem 0xf0000000-0xffffffff]
[ 0.315406] pci_bus 0000:14: resource 15 [io 0x0000-0x0cf7]
[ 0.315409] pci_bus 0000:14: resource 16 [io 0x0d00-0xffff]
[ 0.315449] NET: Registered protocol family 2
[ 0.315495] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.316118] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[ 0.319606] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.320488] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.320492] TCP reno registered
[ 0.320497] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.320527] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.320663] NET: Registered protocol family 1
[ 0.320796] pci 0000:01:05.0: Boot video device
[ 0.320814] PCI: CLS 32 bytes, default 64
[ 0.322975] audit: initializing netlink socket (disabled)
[ 0.322989] type=2000 audit(1298315313.321:1): initialized
[ 0.323486] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.329480] VFS: Disk quotas dquot_6.5.2
[ 0.329608] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.331270] fuse init (API version 7.16)
[ 0.331550] msgmni has been set to 2746
[ 0.332399] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 0.332404] io scheduler noop registered
[ 0.332406] io scheduler deadline registered
[ 0.332515] io scheduler cfq registered (default)
[ 0.332687] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.332721] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 0.332833] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.332857] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 0.332959] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.332982] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
[ 0.336093] ACPI: AC Adapter [ADP0] (on-line)
[ 0.337696] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.337703] ACPI: Power Button [PWRB]
[ 0.337848] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.338587] ACPI: Lid Switch [LID]
[ 0.338704] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.338708] ACPI: Power Button [PWRF]
[ 0.338918] ACPI: Fan [FAN1] (off)
[ 0.343323] acpi device:1f: registered as cooling_device1
[ 0.343461] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1d/LNXVIDEO:00/input/input3
[ 0.343468] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 0.343536] ACPI: acpi_idle registered with cpuidle
[ 0.343572] ACPI: processor limited to max C-state 1
[ 0.365854] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.365858] ACPI: Thermal Zone [TZCR] (38 C)
[ 0.369593] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.375238] ACPI: Battery Slot [BAT0] (battery present)
[ 0.424367] Initializing Nozomi driver 2.1d (build date: Feb 20
2011 01:22:48)
[ 0.424874] Non-volatile memory driver v1.3
[ 0.424989] [drm] Initialized drm 1.1.0 20060810
[ 0.425086] [drm] radeon defaulting to kernel modesetting.
[ 0.425088] [drm] radeon kernel modesetting enabled.
[ 0.425181] radeon 0000:01:05.0: power state changed by ACPI to D0
[ 0.425185] radeon 0000:01:05.0: power state changed by ACPI to D0
[ 0.425206] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.429437] [drm] initializing kernel modesetting (RS690 0x1002:0x791F).
[ 0.429466] [drm] register mmio base: 0xF8100000
[ 0.429468] [drm] register mmio size: 65536
[ 0.429587] ATOM BIOS: ATI
[ 0.429608] radeon 0000:01:05.0: VRAM: 128M 0x0000000058000000 -
0x000000005FFFFFFF (128M used)
[ 0.429612] radeon 0000:01:05.0: GTT: 512M 0x0000000060000000 -
0x000000007FFFFFFF
[ 0.429633] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.429635] [drm] Driver supports precise vblank timestamp query.
[ 0.429666] [drm] radeon: irq initialized.
[ 0.429824] [drm] Detected VRAM RAM=128M, BAR=128M
[ 0.429830] [drm] RAM width 128bits DDR
[ 0.429936] [TTM] Zone kernel: Available graphics memory: 703030 kiB.
[ 0.429939] [TTM] Initializing pool allocator.
[ 0.429964] [drm] radeon: 128M of VRAM memory ready
[ 0.429966] [drm] radeon: 512M of GTT memory ready.
[ 0.429991] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 0.435105] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 0.444268] radeon 0000:01:05.0: WB enabled
[ 0.444425] [drm] Loading RS690/RS740 Microcode
[ 0.444638] [drm] radeon: ring at 0x0000000060001000
[ 0.444657] [drm] ring test succeeded in 1 usecs
[ 0.444809] [drm] radeon: ib pool ready.
[ 0.444879] [drm] ib test succeeded in 0 usecs
[ 0.444887] [drm] Enabling audio support
[ 0.445796] [drm] Radeon Display Connectors
[ 0.445799] [drm] Connector 0:
[ 0.445801] [drm] VGA
[ 0.445804] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48
0x7e5c 0x7e4c
[ 0.445806] [drm] Encoders:
[ 0.445808] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 0.445810] [drm] Connector 1:
[ 0.445811] [drm] LVDS
[ 0.445814] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58
0x7e4c 0x7e5c
[ 0.445816] [drm] Encoders:
[ 0.445818] [drm] LCD1: INTERNAL_LVTM1
[ 0.445819] [drm] Connector 2:
[ 0.445821] [drm] S-video
[ 0.445823] [drm] Encoders:
[ 0.445824] [drm] TV1: INTERNAL_KLDSCP_DAC1
[ 1.073229] [drm] fb mappable at 0xF0040000
[ 1.073231] [drm] vram apper at 0xF0000000
[ 1.073233] [drm] size 4096000
[ 1.073234] [drm] fb depth is 24
[ 1.073236] [drm] pitch is 5120
[ 1.405309] Console: switching to colour frame buffer device 160x50
[ 1.414926] fb0: radeondrmfb frame buffer device
[ 1.414928] drm: registered panic notifier
[ 1.414941] [drm] Initialized radeon 2.8.0 20080528 for
0000:01:05.0 on minor 0
[ 1.418300] brd: module loaded
[ 1.419923] loop: module loaded
[ 1.420279] ahci 0000:00:12.0: version 3.0
[ 1.420306] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.420341] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.420456] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3
Gbps 0xf impl SATA mode
[ 1.420460] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp
pio slum part ccc
[ 1.422259] scsi0 : ahci
[ 1.422601] scsi1 : ahci
[ 1.422833] scsi2 : ahci
[ 1.423117] scsi3 : ahci
[ 1.423390] ata1: SATA max UDMA/133 abar m1024@0xf8609000 port
0xf8609100 irq 22
[ 1.423394] ata2: SATA max UDMA/133 abar m1024@0xf8609000 port
0xf8609180 irq 22
[ 1.423398] ata3: SATA max UDMA/133 abar m1024@0xf8609000 port
0xf8609200 irq 22
[ 1.423403] ata4: SATA max UDMA/133 abar m1024@0xf8609000 port
0xf8609280 irq 22
[ 1.423727] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
[ 1.423778] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.424730] scsi4 : pata_atiixp
[ 1.424968] scsi5 : pata_atiixp
[ 1.425646] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[ 1.425649] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[ 1.426230] PPP generic driver version 2.4.2
[ 1.426422] PPP Deflate Compression module registered
[ 1.426425] PPP BSD Compression module registered
[ 1.426543] PPP MPPE Compression module registered
[ 1.426547] NET: Registered protocol family 24
[ 1.426591] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.426628] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.426674] r8169 0000:08:00.0: setting latency timer to 64
[ 1.426734] r8169 0000:08:00.0: irq 43 for MSI/MSI-X
[ 1.427089] r8169 0000:08:00.0: eth0: RTL8101e at
0xffffc90000010000, 00:a0:d1:84:f0:e3, XID 94200000 IRQ 43
[ 1.431179] usbcore: registered new interface driver cdc_ether
[ 1.431240] usbcore: registered new interface driver cdc_eem
[ 1.431299] usbcore: registered new interface driver cdc_subset
[ 1.431370] usbcore: registered new interface driver rtl8187
[ 1.431487] firewire_ohci 0000:14:06.0: PCI INT A -> GSI 20 (level,
low) -> IRQ 20
[ 1.482127] firewire_ohci: Added fw-ohci device 0000:14:06.0, OHCI
v1.10, 4 IR + 4 IT contexts, quirks 0x1
[ 1.482674] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.482678] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 1.482776] ehci_hcd 0000:00:13.5: power state changed by ACPI to D0
[ 1.482784] ehci_hcd 0000:00:13.5: power state changed by ACPI to D0
[ 1.482805] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.482832] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 1.482840] ehci_hcd 0000:00:13.5: new USB bus registered, assigned
bus number 1
[ 1.486053] ehci_hcd 0000:00:13.5: reset hcs_params 0x10520a dbg=1
cc=5 pcc=2 ordered !ppc ports=10
[ 1.486058] ehci_hcd 0000:00:13.5: reset hcc_params a072 thresh 7
uframes 256/512/1024
[ 1.486088] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB
freeze workaround
[ 1.486103] ehci_hcd 0000:00:13.5: debug port 1
[ 1.486110] ehci_hcd 0000:00:13.5: reset command 0080032 (park)=0
ithresh=8 Async Periodic period=1024 Reset HALT
[ 1.486120] ehci_hcd 0000:00:13.5: MWI active
[ 1.486122] ehci_hcd 0000:00:13.5: supports USB remote wakeup
[ 1.486145] ehci_hcd 0000:00:13.5: irq 19, io mem 0xf8609400
[ 1.486151] ehci_hcd 0000:00:13.5: reset command 0080002 (park)=0
ithresh=8 period=1024 Reset HALT
[ 1.486160] ehci_hcd 0000:00:13.5: init command 0010005 (park)=0
ithresh=1 period=512 RUN
[ 1.492038] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.492076] usb usb1: default language 0x0409
[ 1.492085] usb usb1: udev 1, busnum 1, minor = 0
[ 1.492088] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.492092] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.492096] usb usb1: Product: EHCI Host Controller
[ 1.492099] usb usb1: Manufacturer: Linux
2.6.38-rc5-00100-g0cc9d52-dirty ehci_hcd
[ 1.492102] usb usb1: SerialNumber: 0000:00:13.5
[ 1.492260] usb usb1: usb_probe_device
[ 1.492264] usb usb1: configuration #1 chosen from 1 choice
[ 1.492274] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.492356] hub 1-0:1.0: usb_probe_interface
[ 1.492359] hub 1-0:1.0: usb_probe_interface - got id
[ 1.492362] hub 1-0:1.0: USB hub found
[ 1.492368] hub 1-0:1.0: 10 ports detected
[ 1.492371] hub 1-0:1.0: standalone hub
[ 1.492373] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.492375] hub 1-0:1.0: individual port over-current protection
[ 1.492378] hub 1-0:1.0: power on to power good time: 20ms
[ 1.492383] hub 1-0:1.0: local power source is good
[ 1.492386] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1.492556] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.492559] ohci_hcd: block sizes: ed 80 td 96
[ 1.492586] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.492610] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.492617] ohci_hcd 0000:00:13.0: new USB bus registered, assigned
bus number 2
[ 1.499057] ohci_hcd 0000:00:13.0: created debug files
[ 1.499060] ohci_hcd 0000:00:13.0: supports USB remote wakeup
[ 1.499083] ohci_hcd 0000:00:13.0: irq 16, io mem 0xf8604000
[ 1.550047] ohci_hcd 0000:00:13.0: OHCI controller state
[ 1.550051] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
[ 1.550058] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3
[ 1.550063] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
[ 1.550069] ohci_hcd 0000:00:13.0: intrstatus 0x00000000
[ 1.550073] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 1.550085] ohci_hcd 0000:00:13.0: hcca frame #0000
[ 1.550090] ohci_hcd 0000:00:13.0: roothub.a 00000202 POTPGT=0 NPS NDP=2(2)
[ 1.550095] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 1.550100] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
[ 1.550105] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
[ 1.550110] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
[ 1.550124] usb usb2: default language 0x0409
[ 1.550133] usb usb2: udev 1, busnum 2, minor = 128
[ 1.550136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.550138] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.550141] usb usb2: Product: OHCI Host Controller
[ 1.550144] usb usb2: Manufacturer: Linux
2.6.38-rc5-00100-g0cc9d52-dirty ohci_hcd
[ 1.550147] usb usb2: SerialNumber: 0000:00:13.0
[ 1.550276] usb usb2: usb_probe_device
[ 1.550280] usb usb2: configuration #1 chosen from 1 choice
[ 1.550289] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 1.550375] hub 2-0:1.0: usb_probe_interface
[ 1.550377] hub 2-0:1.0: usb_probe_interface - got id
[ 1.550380] hub 2-0:1.0: USB hub found
[ 1.550389] hub 2-0:1.0: 2 ports detected
[ 1.550391] hub 2-0:1.0: standalone hub
[ 1.550393] hub 2-0:1.0: no power switching (usb 1.0)
[ 1.550395] hub 2-0:1.0: global over-current protection
[ 1.550398] hub 2-0:1.0: power on to power good time: 0ms
[ 1.550404] hub 2-0:1.0: local power source is good
[ 1.550406] hub 2-0:1.0: no over-current condition exists
[ 1.550409] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 1.550473] ehci_hcd 0000:00:13.5: HS companion for 0000:00:13.0
[ 1.550503] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.550520] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.550527] ohci_hcd 0000:00:13.1: new USB bus registered, assigned
bus number 3
[ 1.555056] ohci_hcd 0000:00:13.1: created debug files
[ 1.555058] ohci_hcd 0000:00:13.1: supports USB remote wakeup
[ 1.555078] ohci_hcd 0000:00:13.1: irq 17, io mem 0xf8605000
[ 1.592050] ehci_hcd 0000:00:13.5: GetStatus port:6 status 001803 0
ACK POWER sig=j CSC CONNECT
[ 1.592054] hub 1-0:1.0: port 6: status 0501 change 0001
[ 1.592065] ehci_hcd 0000:00:13.5: GetStatus port:7 status 001803 0
ACK POWER sig=j CSC CONNECT
[ 1.592068] hub 1-0:1.0: port 7: status 0501 change 0001
[ 1.592078] ehci_hcd 0000:00:13.5: GetStatus port:8 status 001803 0
ACK POWER sig=j CSC CONNECT
[ 1.592082] hub 1-0:1.0: port 8: status 0501 change 0001
[ 1.595506] ata5.00: ATAPI: TSSTcorp CDDVDW TS-L632H, TO01, max UDMA/33
[ 1.606046] ohci_hcd 0000:00:13.1: OHCI controller state
[ 1.606051] ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
[ 1.606058] ohci_hcd 0000:00:13.1: control 0x283 RWC HCFS=operational CBSR=3
[ 1.606063] ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
[ 1.606070] ohci_hcd 0000:00:13.1: intrstatus 0x00000000
[ 1.606074] ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 1.606086] ohci_hcd 0000:00:13.1: hcca frame #0000
[ 1.606091] ohci_hcd 0000:00:13.1: roothub.a 00000202 POTPGT=0 NPS NDP=2(2)
[ 1.606095] ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
[ 1.606100] ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
[ 1.606105] ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS
[ 1.606110] ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
[ 1.606124] usb usb3: default language 0x0409
[ 1.606132] usb usb3: udev 1, busnum 3, minor = 256
[ 1.606135] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.606138] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.606141] usb usb3: Product: OHCI Host Controller
[ 1.606144] usb usb3: Manufacturer: Linux
2.6.38-rc5-00100-g0cc9d52-dirty ohci_hcd
[ 1.606146] usb usb3: SerialNumber: 0000:00:13.1
[ 1.606295] usb usb3: usb_probe_device
[ 1.606299] usb usb3: configuration #1 chosen from 1 choice
[ 1.606310] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 1.606394] hub 3-0:1.0: usb_probe_interface
[ 1.606396] hub 3-0:1.0: usb_probe_interface - got id
[ 1.606400] hub 3-0:1.0: USB hub found
[ 1.606408] hub 3-0:1.0: 2 ports detected
[ 1.606411] hub 3-0:1.0: standalone hub
[ 1.606413] hub 3-0:1.0: no power switching (usb 1.0)
[ 1.606415] hub 3-0:1.0: global over-current protection
[ 1.606418] hub 3-0:1.0: power on to power good time: 0ms
[ 1.606424] hub 3-0:1.0: local power source is good
[ 1.606426] hub 3-0:1.0: no over-current condition exists
[ 1.606429] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 1.606499] ehci_hcd 0000:00:13.5: HS companion for 0000:00:13.1
[ 1.606535] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.606557] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 1.606564] ohci_hcd 0000:00:13.2: new USB bus registered, assigned
bus number 4
[ 1.611063] ohci_hcd 0000:00:13.2: created debug files
[ 1.611066] ohci_hcd 0000:00:13.2: supports USB remote wakeup
[ 1.611077] ohci_hcd 0000:00:13.2: irq 18, io mem 0xf8606000
[ 1.617447] ata5.00: configured for UDMA/33
[ 1.650067] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 1.662054] ohci_hcd 0000:00:13.2: OHCI controller state
[ 1.662058] ohci_hcd 0000:00:13.2: OHCI 1.0, NO legacy support registers
[ 1.662065] ohci_hcd 0000:00:13.2: control 0x283 RWC HCFS=operational CBSR=3
[ 1.662070] ohci_hcd 0000:00:13.2: cmdstatus 0x00000 SOC=0
[ 1.662075] ohci_hcd 0000:00:13.2: intrstatus 0x00000000
[ 1.662080] ohci_hcd 0000:00:13.2: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 1.662092] ohci_hcd 0000:00:13.2: hcca frame #0000
[ 1.662097] ohci_hcd 0000:00:13.2: roothub.a 00000202 POTPGT=0 NPS NDP=2(2)
[ 1.662101] ohci_hcd 0000:00:13.2: roothub.b 00000000 PPCM=0000 DR=0000
[ 1.662106] ohci_hcd 0000:00:13.2: roothub.status 00008000 DRWE
[ 1.662111] ohci_hcd 0000:00:13.2: roothub.portstatus [0] 0x00000100 PPS
[ 1.662116] ohci_hcd 0000:00:13.2: roothub.portstatus [1] 0x00000100 PPS
[ 1.662130] usb usb4: default language 0x0409
[ 1.662138] usb usb4: udev 1, busnum 4, minor = 384
[ 1.662141] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.662144] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.662147] usb usb4: Product: OHCI Host Controller
[ 1.662150] usb usb4: Manufacturer: Linux
2.6.38-rc5-00100-g0cc9d52-dirty ohci_hcd
[ 1.662152] usb usb4: SerialNumber: 0000:00:13.2
[ 1.662296] usb usb4: usb_probe_device
[ 1.662300] usb usb4: configuration #1 chosen from 1 choice
[ 1.662310] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 1.662396] hub 4-0:1.0: usb_probe_interface
[ 1.662399] hub 4-0:1.0: usb_probe_interface - got id
[ 1.662402] hub 4-0:1.0: USB hub found
[ 1.662411] hub 4-0:1.0: 2 ports detected
[ 1.662413] hub 4-0:1.0: standalone hub
[ 1.662415] hub 4-0:1.0: no power switching (usb 1.0)
[ 1.662417] hub 4-0:1.0: global over-current protection
[ 1.662420] hub 4-0:1.0: power on to power good time: 0ms
[ 1.662425] hub 4-0:1.0: local power source is good
[ 1.662428] hub 4-0:1.0: no over-current condition exists
[ 1.662430] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 1.662502] ehci_hcd 0000:00:13.5: HS companion for 0000:00:13.2
[ 1.662538] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.662559] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 1.662566] ohci_hcd 0000:00:13.3: new USB bus registered, assigned
bus number 5
[ 1.667054] ohci_hcd 0000:00:13.3: created debug files
[ 1.667057] ohci_hcd 0000:00:13.3: supports USB remote wakeup
[ 1.667068] ohci_hcd 0000:00:13.3: irq 17, io mem 0xf8607000
[ 1.692050] hub 1-0:1.0: state 7 ports 10 chg 01c0 evt 0000
[ 1.692064] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
[ 1.718045] ohci_hcd 0000:00:13.3: OHCI controller state
[ 1.718051] ohci_hcd 0000:00:13.3: OHCI 1.0, NO legacy support registers
[ 1.718056] ohci_hcd 0000:00:13.3: control 0x283 RWC HCFS=operational CBSR=3
[ 1.718061] ohci_hcd 0000:00:13.3: cmdstatus 0x00000 SOC=0
[ 1.718067] ohci_hcd 0000:00:13.3: intrstatus 0x00000000
[ 1.718073] ohci_hcd 0000:00:13.3: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 1.718085] ohci_hcd 0000:00:13.3: hcca frame #0000
[ 1.718090] ohci_hcd 0000:00:13.3: roothub.a 00000202 POTPGT=0 NPS NDP=2(2)
[ 1.718094] ohci_hcd 0000:00:13.3: roothub.b 00000000 PPCM=0000 DR=0000
[ 1.718099] ohci_hcd 0000:00:13.3: roothub.status 00008000 DRWE
[ 1.718104] ohci_hcd 0000:00:13.3: roothub.portstatus [0] 0x00000100 PPS
[ 1.718109] ohci_hcd 0000:00:13.3: roothub.portstatus [1] 0x00000100 PPS
[ 1.718121] usb usb5: default language 0x0409
[ 1.718133] usb usb5: udev 1, busnum 5, minor = 512
[ 1.718136] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.718139] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.718142] usb usb5: Product: OHCI Host Controller
[ 1.718144] usb usb5: Manufacturer: Linux
2.6.38-rc5-00100-g0cc9d52-dirty ohci_hcd
[ 1.718147] usb usb5: SerialNumber: 0000:00:13.3
[ 1.718297] usb usb5: usb_probe_device
[ 1.718300] usb usb5: configuration #1 chosen from 1 choice
[ 1.718309] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 1.718392] hub 5-0:1.0: usb_probe_interface
[ 1.718395] hub 5-0:1.0: usb_probe_interface - got id
[ 1.718398] hub 5-0:1.0: USB hub found
[ 1.718406] hub 5-0:1.0: 2 ports detected
[ 1.718408] hub 5-0:1.0: standalone hub
[ 1.718410] hub 5-0:1.0: no power switching (usb 1.0)
[ 1.718412] hub 5-0:1.0: global over-current protection
[ 1.718415] hub 5-0:1.0: power on to power good time: 0ms
[ 1.718421] hub 5-0:1.0: local power source is good
[ 1.718424] hub 5-0:1.0: no over-current condition exists
[ 1.718426] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 1.718497] ehci_hcd 0000:00:13.5: HS companion for 0000:00:13.3
[ 1.718527] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.718548] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 1.718554] ohci_hcd 0000:00:13.4: new USB bus registered, assigned
bus number 6
[ 1.723058] ohci_hcd 0000:00:13.4: created debug files
[ 1.723068] ohci_hcd 0000:00:13.4: irq 18, io mem 0xf8608000
[ 1.728050] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.728106] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.728141] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.743038] ehci_hcd 0000:00:13.5: port 6 high speed
[ 1.743044] ehci_hcd 0000:00:13.5: GetStatus port:6 status 001005 0
ACK POWER sig=se0 PE CONNECT
[ 1.774048] ohci_hcd 0000:00:13.4: OHCI controller state
[ 1.774054] ohci_hcd 0000:00:13.4: OHCI 1.0, NO legacy support registers
[ 1.774059] ohci_hcd 0000:00:13.4: control 0x083 HCFS=operational CBSR=3
[ 1.774064] ohci_hcd 0000:00:13.4: cmdstatus 0x00000 SOC=0
[ 1.774070] ohci_hcd 0000:00:13.4: intrstatus 0x00000000
[ 1.774077] ohci_hcd 0000:00:13.4: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 1.774088] ohci_hcd 0000:00:13.4: hcca frame #0000
[ 1.774093] ohci_hcd 0000:00:13.4: roothub.a 00000202 POTPGT=0 NPS NDP=2(2)
[ 1.774098] ohci_hcd 0000:00:13.4: roothub.b 00000000 PPCM=0000 DR=0000
[ 1.774102] ohci_hcd 0000:00:13.4: roothub.status 00008000 DRWE
[ 1.774107] ohci_hcd 0000:00:13.4: roothub.portstatus [0] 0x00000100 PPS
[ 1.774112] ohci_hcd 0000:00:13.4: roothub.portstatus [1] 0x00000100 PPS
[ 1.774126] usb usb6: default language 0x0409
[ 1.774134] usb usb6: udev 1, busnum 6, minor = 640
[ 1.774137] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.774140] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.774143] usb usb6: Product: OHCI Host Controller
[ 1.774145] usb usb6: Manufacturer: Linux
2.6.38-rc5-00100-g0cc9d52-dirty ohci_hcd
[ 1.774148] usb usb6: SerialNumber: 0000:00:13.4
[ 1.774292] usb usb6: usb_probe_device
[ 1.774296] usb usb6: configuration #1 chosen from 1 choice
[ 1.774304] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 1.774389] hub 6-0:1.0: usb_probe_interface
[ 1.774392] hub 6-0:1.0: usb_probe_interface - got id
[ 1.774395] hub 6-0:1.0: USB hub found
[ 1.774404] hub 6-0:1.0: 2 ports detected
[ 1.774406] hub 6-0:1.0: standalone hub
[ 1.774408] hub 6-0:1.0: no power switching (usb 1.0)
[ 1.774410] hub 6-0:1.0: global over-current protection
[ 1.774413] hub 6-0:1.0: power on to power good time: 0ms
[ 1.774419] hub 6-0:1.0: local power source is good
[ 1.774422] hub 6-0:1.0: no over-current condition exists
[ 1.774424] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 1.774506] ehci_hcd 0000:00:13.5: HS companion for 0000:00:13.4
[ 1.774597] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.774889] usbcore: registered new interface driver usblp
[ 1.774891] Initializing USB Mass Storage driver...
[ 1.774978] usbcore: registered new interface driver usb-storage
[ 1.774980] USB Mass Storage support registered.
[ 1.775086] usbcore: registered new interface driver libusual
[ 1.775247] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0]
at 0x60,0x64 irq 1,12
[ 1.778234] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.778240] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.778576] mousedev: PS/2 mouse device common for all mice
[ 1.779188] rtc_cmos 00:04: RTC can wake from S4
[ 1.782147] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.782178] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.782243] i2c /dev entries driver
[ 1.782814] piix4_smbus 0000:00:14.0: SMBus Host Controller at
0x8410, revision 0
[ 1.783062] Linux video capture interface: v2.00
[ 1.783208] usbcore: registered new interface driver uvcvideo
[ 1.783210] USB Video Class driver (v1.0.0)
[ 1.783225] k8temp 0000:00:18.3: Temperature readouts might be
wrong - check erratum #141
[ 1.783381] Bluetooth: Virtual HCI driver ver 1.3
[ 1.783464] Bluetooth: HCI UART driver ver 2.2
[ 1.783467] Bluetooth: HCI H4 protocol initialized
[ 1.783469] Bluetooth: HCI BCSP protocol initialized
[ 1.783471] Bluetooth: HCILL protocol initialized
[ 1.783473] Bluetooth: Broadcom Blutonium firmware driver ver 1.2
[ 1.783540] usbcore: registered new interface driver bcm203x
[ 1.783543] Bluetooth: Digianswer Bluetooth USB driver ver 0.10
[ 1.783609] usbcore: registered new interface driver bpa10x
[ 1.783612] Bluetooth: BlueFRITZ! USB driver ver 1.2
[ 1.783675] usbcore: registered new interface driver bfusb
[ 1.783678] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 1.783745] usbcore: registered new interface driver btusb
[ 1.783863] cpuidle: using governor ladder
[ 1.783866] cpuidle: using governor menu
[ 1.783932] sdhci: Secure Digital Host Controller Interface driver
[ 1.783934] sdhci: Copyright(c) Pierre Ossman
[ 1.783962] sdhci-pci 0000:14:06.1: SDHCI controller found
[1180:0822] (rev 22)
[ 1.783989] sdhci-pci 0000:14:06.1: PCI INT B -> GSI 21 (level,
low) -> IRQ 21
[ 1.785051] sdhci-pci 0000:14:06.1: Will use DMA mode even though
HW doesn't fully claim to support it.
[ 1.785059] sdhci-pci 0000:14:06.1: setting latency timer to 64
[ 1.786195] Registered led device: mmc0::
[ 1.787357] mmc0: SDHCI controller on PCI [0000:14:06.1] using DMA
[ 1.788487] usbcore: registered new interface driver usbhid
[ 1.788490] usbhid: USB HID core driver
[ 1.788493] zram: num_devices not specified. Using default: 1
[ 1.788495] zram: Creating 1 devices ...
[ 1.789573] Detected Toshiba ACPI Bluetooth device - installing
RFKill handler
[ 1.795702] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[ 1.799039] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 1.809996] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
[ 1.814296] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input4
[ 1.851092] ehci_hcd 0000:00:13.5: port 6 high speed
[ 1.851099] ehci_hcd 0000:00:13.5: GetStatus port:6 status 001005 0
ACK POWER sig=se0 PE CONNECT
[ 1.852558] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 1.852561] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.852563] hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 1.852565] mono: mono_out=0x0
[ 1.852567] inputs:
[ 1.852981] realtek: No valid SSID, checking pincfg 0x4015812d for NID 0x1d
[ 1.852984] realtek: Enabling init ASM_ID=0x812d CODEC_ID=10ec0268
[ 1.855689] input: HDA ATI SB Mic as
/devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 1.855872] input: HDA ATI SB Headphone as
/devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 1.857037] ALSA device list:
[ 1.857040] #0: HDA ATI SB at 0xf8600000 irq 16
[ 1.857043] Netfilter messages via NETLINK v0.30.
[ 1.857065] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.857461] ctnetlink v0.93: registering with nfnetlink.
[ 1.857636] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.857688] TCP cubic registered
[ 1.857692] NET: Registered protocol family 17
[ 1.857755] Bluetooth: L2CAP ver 2.15
[ 1.857757] Bluetooth: L2CAP socket layer initialized
[ 1.857762] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.857764] Bluetooth: SCO socket layer initialized
[ 1.857840] Bluetooth: RFCOMM TTY layer initialized
[ 1.857855] Bluetooth: RFCOMM socket layer initialized
[ 1.857858] Bluetooth: RFCOMM ver 1.11
[ 1.857860] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.857863] Bluetooth: BNEP filters: protocol multicast
[ 1.857866] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.857976] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core
Processor TK-55 (2 cpu cores) (version 2.20.00)
[ 1.858072] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x13
[ 1.858074] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x14
[ 1.858077] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1a
[ 1.915983] usb 1-6: default language 0x0409
[ 1.929235] usb 1-6: udev 2, busnum 1, minor = 1
[ 1.929238] usb 1-6: New USB device found, idVendor=0bda, idProduct=8197
[ 1.929241] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.929245] usb 1-6: Manufacturer: Manufacturer_Realtek
[ 1.929247] usb 1-6: SerialNumber: 00e04c000001
[ 1.929429] usb 1-6: usb_probe_device
[ 1.929433] usb 1-6: configuration #1 chosen from 1 choice
[ 1.930233] usb 1-6: adding 1-6:1.0 (config #1, interface 0)
[ 1.941539] rtl8187 1-6:1.0: usb_probe_interface
[ 1.941542] rtl8187 1-6:1.0: usb_probe_interface - got id
[ 1.983166] firewire_core: created device fw0: GUID 00080da0d184f0e3, S400
[ 2.089026] ata1: softreset failed (device not ready)
[ 2.089109] ata1: applying SB600 PMP SRST workaround and retrying
[ 2.244043] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.244874] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 2.245573] ieee80211 phy0: hwaddr 00:c0:a8:ff:54:49, RTL8187BvE V0
+ rtl8225z2, rfkill mask 2
[ 2.267042] rtl8187: Customer ID is 0x04
[ 2.267141] Registered led device: rtl8187-phy0::radio
[ 2.267221] Registered led device: rtl8187-phy0::tx
[ 2.267297] Registered led device: rtl8187-phy0::rx
[ 2.268038] rtl8187: wireless switch is on
[ 2.268241] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s
[ 2.319035] ehci_hcd 0000:00:13.5: port 7 full speed --> companion
[ 2.319041] ehci_hcd 0000:00:13.5: GetStatus port:7 status 003801 0
ACK POWER OWNER sig=j CONNECT
[ 2.319096] hub 1-0:1.0: port 7 not reset yet, waiting 50ms
[ 2.370032] ehci_hcd 0000:00:13.5: GetStatus port:7 status 003002 0
ACK POWER OWNER sig=se0 CSC
[ 2.370056] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s
[ 2.421053] ehci_hcd 0000:00:13.5: port 8 high speed
[ 2.421058] ehci_hcd 0000:00:13.5: GetStatus port:8 status 001005 0
ACK POWER sig=se0 PE CONNECT
[ 2.432045] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1,
caps: 0xa04713/0x204000/0x0
[ 2.432052] synaptics: Toshiba Satellite A210 detected, limiting
rate to 40pps.
[ 2.466343] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input7
[ 2.472036] usb 1-8: new high speed USB device using ehci_hcd and address 4
[ 2.523078] ehci_hcd 0000:00:13.5: port 8 high speed
[ 2.523083] ehci_hcd 0000:00:13.5: GetStatus port:8 status 001005 0
ACK POWER sig=se0 PE CONNECT
[ 2.576736] ata1.00: ATA-7: TOSHIBA MK1237GSX, DL130M, max UDMA/100
[ 2.576739] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.576745] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.577667] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.577670] ata1.00: configured for UDMA/100
[ 2.577854] scsi 0:0:0:0: Direct-Access ATA TOSHIBA
MK1237GS DL13 PQ: 0 ANSI: 5
[ 2.578204] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks:
(120 GB/111 GiB)
[ 2.578253] sd 0:0:0:0: [sda] Write Protect is off
[ 2.578256] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.578277] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.578315] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.582263] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW
TS-L632H TO01 PQ: 0 ANSI: 5
[ 2.590291] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 2.590296] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.590532] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.590782] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 2.595331] usb 1-8: skipped 1 descriptor after configuration
[ 2.595335] usb 1-8: skipped 5 descriptors after interface
[ 2.595338] usb 1-8: skipped 1 descriptor after endpoint
[ 2.595341] usb 1-8: skipped 10 descriptors after interface
[ 2.595824] usb 1-8: default language 0x0409
[ 2.600449] usb 1-8: udev 4, busnum 1, minor = 3
[ 2.600452] usb 1-8: New USB device found, idVendor=04f2, idProduct=b008
[ 2.600455] usb 1-8: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.600458] usb 1-8: Product: Chicony USB 2.0 Camera
[ 2.600460] usb 1-8: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.600462] usb 1-8: SerialNumber: SN0001
[ 2.600592] usb 1-8: usb_probe_device
[ 2.600596] usb 1-8: configuration #1 chosen from 1 choice
[ 2.600829] usb 1-8: adding 1-8:1.0 (config #1, interface 0)
[ 2.601589] sda: sda1 sda2 sda3 sda4
[ 2.602351] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.602553] uvcvideo 1-8:1.0: usb_probe_interface
[ 2.602558] uvcvideo 1-8:1.0: usb_probe_interface - got id
[ 2.602577] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera
(04f2:b008)
[ 2.605805] input: Chicony USB 2.0 Camera as
/devices/pci0000:00/0000:00:13.5/usb1/1-8/1-8:1.0/input/input8
[ 2.605927] usb 1-8: adding 1-8:1.1 (config #1, interface 1)
[ 2.606072] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.606081] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.606086] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 2.606095] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [0]
= 0x00010101 CSC PPS CCS
[ 2.606100] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[ 2.625118] registered taskstats version 1
[ 2.665797] EXT4-fs (sda2): mounted filesystem with ordered data
mode. Opts: (null)
[ 2.665814] VFS: Mounted root (ext2 filesystem) readonly on device 8:2.
[ 2.666736] Freeing unused kernel memory: 440k freed
[ 2.704036] ohci_hcd 0000:00:13.0: auto-stop root hub
[ 2.704052] ohci_hcd 0000:00:13.1: auto-stop root hub
[ 2.704066] ohci_hcd 0000:00:13.2: auto-stop root hub
[ 2.710040] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms
status 0x101
[ 2.731091] ohci_hcd 0000:00:13.3: port[0] reset timeout, stat 00000111
[ 2.782036] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [0]
= 0x00100103 PRSC PPS PES CCS
[ 2.833046] usb 5-1: new full speed USB device using ohci_hcd and address 2
[ 2.860086] ohci_hcd 0000:00:13.3: port[0] reset timeout, stat 00000113
[ 2.911037] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [0]
= 0x00100103 PRSC PPS PES CCS
[ 2.954050] ohci_hcd 0000:00:13.4: auto-stop root hub
[ 3.007083] usb 5-1: skipped 1 descriptor after interface
[ 3.007089] usb 5-1: udev 2, busnum 5, minor = 513
[ 3.007092] usb 5-1: New USB device found, idVendor=0930, idProduct=0508
[ 3.007095] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.007292] usb 5-1: usb_probe_device
[ 3.007297] usb 5-1: configuration #1 chosen from 1 choice
[ 3.010071] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
[ 3.010178] btusb 5-1:1.0: usb_probe_interface
[ 3.010181] btusb 5-1:1.0: usb_probe_interface - got id
[ 3.010533] usb 5-1: adding 5-1:1.1 (config #1, interface 1)
[ 3.010653] usb 5-1: adding 5-1:1.2 (config #1, interface 2)
[ 3.010752] btusb 5-1:1.2: usb_probe_interface
[ 3.010755] btusb 5-1:1.2: usb_probe_interface - got id
[ 3.010789] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.010796] hub 1-0:1.0: state 7 ports 10 chg 0000 evt f880
[ 3.010812] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 3.496562] firewire_net: firewire0: IPv4 over FireWire on device
00080da0d184f0e3
[ 3.496629] firewire_core: refreshed device fw0
[ 3.704036] hub 2-0:1.0: hub_suspend
[ 3.704047] usb usb2: bus auto-suspend
[ 3.704053] ohci_hcd 0000:00:13.0: suspend root hub
[ 4.704046] usb 1-8: usb auto-suspend
[ 4.704058] hub 3-0:1.0: hub_suspend
[ 4.704066] usb usb3: bus auto-suspend
[ 4.704070] ohci_hcd 0000:00:13.1: suspend root hub
[ 4.704078] hub 4-0:1.0: hub_suspend
[ 4.704082] usb usb4: bus auto-suspend
[ 4.704085] ohci_hcd 0000:00:13.2: suspend root hub
[ 5.712051] usb 5-1: usb auto-suspend
[ 5.712062] hub 6-0:1.0: hub_suspend
[ 5.712068] usb usb6: bus auto-suspend
[ 5.712074] ohci_hcd 0000:00:13.4: suspend root hub
[ 6.087998] udev[1173]: starting version 164
[ 6.421195] usb 1-8: usb auto-resume
[ 6.447056] ehci_hcd 0000:00:13.5: GetStatus port:8 status 001005 0
ACK POWER sig=se0 PE CONNECT
[ 6.458034] usb 1-8: finish resume
[ 6.459365] usb 1-8: link qh4-0001/ffff8800526a5b00 start 1 [1/0 us]
[ 6.459456] usb 1-8: unlink qh4-0001/ffff8800526a5b00 start 1 [1/0 us]
[ 7.723047] hub 5-0:1.0: hub_suspend
[ 7.723057] usb usb5: bus auto-suspend
[ 7.723063] ohci_hcd 0000:00:13.3: suspend root hub
[ 8.704045] usb 1-8: usb auto-suspend
[ 9.291304] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 9.478490] EXT4-fs (sda4): mounted filesystem with ordered data
mode. Opts: (null)
[ 9.586738] Adding 2000088k swap on /dev/sda3. Priority:-1
extents:1 across:2000088k
[ 14.944194] r8169 0000:08:00.0: eth0: link down
[ 18.718486] ieee80211 phy0: device now idle
[ 18.912963] ieee80211 phy0: device no longer idle - scanning
[ 20.899280] ieee80211 phy0: device now idle
[ 40.002325] ieee80211 phy0: device no longer idle - scanning
[ 41.861325] ieee80211 phy0: device now idle
[ 65.536833] start_kdeinit (2196): /proc/2196/oom_adj is deprecated,
please use /proc/2196/oom_score_adj instead.
[ 71.001633] ieee80211 phy0: device no longer idle - scanning
[ 72.868465] ieee80211 phy0: device now idle
[ 73.529789] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 81.400983] ieee80211 phy0: device no longer idle - scanning
[ 83.262352] ieee80211 phy0: device now idle
[ 83.367409] ieee80211 phy0: device no longer idle - working
[ 83.431368] wlan0: authenticate with 00:25:86:d5:ba:d6 (try 1)
[ 83.631045] wlan0: authenticate with 00:25:86:d5:ba:d6 (try 2)
[ 83.831052] wlan0: authenticate with 00:25:86:d5:ba:d6 (try 3)
[ 83.833173] wlan0: authenticated
[ 83.833191] ieee80211 phy0: device now idle
[ 83.884930] ieee80211 phy0: device no longer idle - working
[ 83.936437] wlan0: associate with 00:25:86:d5:ba:d6 (try 1)
[ 83.938444] wlan0: RX AssocResp from 00:25:86:d5:ba:d6 (capab=0x431
status=0 aid=23)
[ 83.938447] wlan0: associated
[ 83.938460] ieee80211 phy0: Allocated STA 00:25:86:d5:ba:d6
[ 83.938709] ieee80211 phy0: Inserted STA 00:25:86:d5:ba:d6
[ 104.839517] usb 1-8: usb auto-resume
[ 104.865056] ehci_hcd 0000:00:13.5: GetStatus port:8 status 001005 0
ACK POWER sig=se0 PE CONNECT
[ 104.876038] usb 1-8: finish resume
[ 104.877365] ehci_hcd 0000:00:13.5: reused qh ffff8800526a5b00 schedule
[ 104.877373] usb 1-8: link qh4-0001/ffff8800526a5b00 start 1 [1/0 us]
[ 104.895759] usb 1-8: unlink qh4-0001/ffff8800526a5b00 start 1 [1/0 us]
[ 106.895080] usb 1-8: usb auto-suspend
[ 521.272040] ieee80211 phy0: wlan0: No probe response from AP
00:25:86:d5:ba:d6 after 500ms, try 1
[ 648.704048] wlan0: detected beacon loss from AP - sending probe request
[ 648.726127] wlan0: cancelling probereq poll due to a received beacon
[ 963.284040] ieee80211 phy0: wlan0: No probe response from AP
00:25:86:d5:ba:d6 after 500ms, try 1
[ 1068.159606] CE: hpet increased min_delta_ns to 20113 nsec
[ 1426.106090] usb 1-8: usb auto-resume
[ 1426.132071] ehci_hcd 0000:00:13.5: GetStatus port:8 status 001005 0
ACK POWER sig=se0 PE CONNECT
[ 1426.143044] usb 1-8: finish resume
[ 1426.144675] ehci_hcd 0000:00:13.5: reused qh ffff8800526a5b00 schedule
[ 1426.144682] usb 1-8: link qh4-0001/ffff8800526a5b00 start 1 [1/0 us]
[ 1426.145429] usb 1-8: unlink qh4-0001/ffff8800526a5b00 start 1 [1/0 us]
[ 1428.704087] usb 1-8: usb auto-suspend
[ 1488.363033] ieee80211 phy0: wlan0: No probe response from AP
00:25:86:d5:ba:d6 after 500ms, try 1
[ 1731.769038] ieee80211 phy0: wlan0: No probe response from AP
00:25:86:d5:ba:d6 after 500ms, try 1
[ 2214.357034] ieee80211 phy0: wlan0: No probe response from AP
00:25:86:d5:ba:d6 after 500ms, try 1
[ 2336.426041] ieee80211 phy0: wlan0: No probe response from AP
00:25:86:d5:ba:d6 after 500ms, try 1
Any ideas what could I try or where is problem?
Thanks
David
--
Jabber/XMPP: okias@isgeek.info
Skype: okiasxxx
ICQ: 283-633-094
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic