[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-usb
Subject: [PATCH v3 1/2] ARM : OMAP: MUSB : Pass board specific data using a structure
From: Maulik Mankad <x0082077 () ti ! com>
Date: 2009-12-31 13:34:36
Message-ID: 1262265756-17634-1-git-send-email-x0082077 () ti ! com
[Download RAW message or body]
ARM : OMAP: MUSB :Pass board specific data from board file
This patch proposes to pass board specific data for MUSB
(like interface_type, mode etc) from board file by defining
board specific structure.
Each board file can define this structure based on
its requirement and pass this information to the
driver.
Signed-off-by: Maulik Mankad <x0082077@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Gupta Ajay Kumar <ajay.gupta@ti.com>
---
arch/arm/mach-omap2/board-2430sdp.c | 8 +++++++-
arch/arm/mach-omap2/board-3430sdp.c | 8 +++++++-
arch/arm/mach-omap2/board-cm-t35.c | 8 +++++++-
arch/arm/mach-omap2/board-igep0020.c | 8 +++++++-
arch/arm/mach-omap2/board-ldp.c | 8 +++++++-
arch/arm/mach-omap2/board-omap3beagle.c | 8 +++++++-
arch/arm/mach-omap2/board-omap3evm.c | 8 +++++++-
arch/arm/mach-omap2/board-omap3pandora.c | 8 +++++++-
arch/arm/mach-omap2/board-omap3touchbook.c | 8 +++++++-
arch/arm/mach-omap2/board-overo.c | 8 +++++++-
arch/arm/mach-omap2/board-rx51.c | 8 +++++++-
arch/arm/mach-omap2/board-zoom-peripherals.c | 8 +++++++-
arch/arm/mach-omap2/usb-musb.c | 9 +++++----
arch/arm/plat-omap/include/plat/usb.h | 10 +++++++++-
include/linux/usb/musb.h | 3 +++
15 files changed, 101 insertions(+), 17 deletions(-)
Index: felipe_musb/arch/arm/mach-omap2/board-2430sdp.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-2430sdp.c
+++ felipe_musb/arch/arm/mach-omap2/board-2430sdp.c
@@ -195,6 +195,12 @@ static struct twl4030_hsmmc_info mmc[] _
{} /* Terminator */
};
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+}
+
static void __init omap_2430sdp_init(void)
{
int ret;
@@ -204,7 +210,7 @@ static void __init omap_2430sdp_init(voi
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
omap_serial_init();
twl4030_mmc_init(mmc);
- usb_musb_init(MUSB_OTG, 100);
+ usb_musb_init(&musb_board_data);
board_smc91x_init();
/* Turn off secondary LCD backlight */
Index: felipe_musb/arch/arm/mach-omap2/board-3430sdp.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-3430sdp.c
+++ felipe_musb/arch/arm/mach-omap2/board-3430sdp.c
@@ -651,6 +651,12 @@ static struct omap_board_mux board_mux[]
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap_3430sdp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -665,7 +671,7 @@ static void __init omap_3430sdp_init(voi
ARRAY_SIZE(sdp3430_spi_board_info));
ads7846_dev_init();
omap_serial_init();
- usb_musb_init(MUSB_OTG, 100);
+ usb_musb_init(&musb_board_data);
board_smc91x_init();
sdp3430_display_init();
enable_board_wakeup_source();
Index: felipe_musb/arch/arm/mach-omap2/board-cm-t35.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-cm-t35.c
+++ felipe_musb/arch/arm/mach-omap2/board-cm-t35.c
@@ -576,6 +576,12 @@ static struct omap_board_mux board_mux[]
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init cm_t35_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
@@ -586,7 +592,7 @@ static void __init cm_t35_init(void)
cm_t35_init_ethernet();
cm_t35_init_led();
- usb_musb_init(MUSB_OTG, 100);
+ usb_musb_init(&musb_board_data);
}
MACHINE_START(CM_T35, "Compulab CM-T35")
Index: felipe_musb/arch/arm/mach-omap2/board-igep0020.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-igep0020.c
+++ felipe_musb/arch/arm/mach-omap2/board-igep0020.c
@@ -212,12 +212,18 @@ static struct omap_board_mux board_mux[]
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init igep2_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
igep2_i2c_init();
omap_serial_init();
- usb_musb_init(MUSB_OTG, 100);
+ usb_musb_init(&musb_board_data);
igep2_init_smsc911x();
Index: felipe_musb/arch/arm/mach-omap2/board-ldp.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-ldp.c
+++ felipe_musb/arch/arm/mach-omap2/board-ldp.c
@@ -384,6 +384,12 @@ static struct omap_board_mux board_mux[]
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap_ldp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -395,7 +401,7 @@ static void __init omap_ldp_init(void)
ARRAY_SIZE(ldp_spi_board_info));
ads7846_dev_init();
omap_serial_init();
- usb_musb_init(MUSB_OTG, 100);
+ usb_musb_init(&musb_board_data);
twl4030_mmc_init(mmc);
/* link regulators to MMC adapters */
Index: felipe_musb/arch/arm/mach-omap2/board-omap3beagle.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-omap3beagle.c
+++ felipe_musb/arch/arm/mach-omap2/board-omap3beagle.c
@@ -431,6 +431,12 @@ static struct omap_board_mux board_mux[]
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap3_beagle_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -444,7 +450,7 @@ static void __init omap3_beagle_init(voi
/* REVISIT leave DVI powered down until it's needed ... */
gpio_direction_output(170, true);
- usb_musb_init(MUSB_OTG, 100);
+ usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
omap3beagle_flash_init();
Index: felipe_musb/arch/arm/mach-omap2/board-omap3evm.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-omap3evm.c
+++ felipe_musb/arch/arm/mach-omap2/board-omap3evm.c
@@ -431,6 +431,12 @@ static struct omap_board_mux board_mux[]
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap3_evm_init(void)
{
omap3_evm_get_revision();
@@ -470,7 +476,7 @@ static void __init omap3_evm_init(void)
omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
ehci_pdata.reset_gpio_port[1] = 135;
}
- usb_musb_init(MUSB_OTG, 100);
+ usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
ads7846_dev_init();
omap3evm_init_smsc911x();
Index: felipe_musb/arch/arm/mach-omap2/board-omap3pandora.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-omap3pandora.c
+++ felipe_musb/arch/arm/mach-omap2/board-omap3pandora.c
@@ -402,6 +402,12 @@ static struct omap_board_mux board_mux[]
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap3pandora_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -414,7 +420,7 @@ static void __init omap3pandora_init(voi
omap3pandora_ads7846_init();
usb_ehci_init(&ehci_pdata);
pandora_keys_gpio_init();
- usb_musb_init(MUSB_OTG, 100);
+ usb_musb_init(&musb_board_data);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
Index: felipe_musb/arch/arm/mach-omap2/board-omap3touchbook.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-omap3touchbook.c
+++ felipe_musb/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -528,6 +528,12 @@ static void __init early_touchbook_revis
}
__early_param("tbr=", early_touchbook_revision);
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap3_touchbook_init(void)
{
pm_power_off = omap3_touchbook_poweroff;
@@ -546,7 +552,7 @@ static void __init omap3_touchbook_init(
spi_register_board_info(omap3_ads7846_spi_board_info,
ARRAY_SIZE(omap3_ads7846_spi_board_info));
omap3_ads7846_init();
- usb_musb_init(MUSB_OTG, 100);
+ usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
omap3touchbook_flash_init();
Index: felipe_musb/arch/arm/mach-omap2/board-overo.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-overo.c
+++ felipe_musb/arch/arm/mach-omap2/board-overo.c
@@ -414,6 +414,12 @@ static struct omap_board_mux board_mux[]
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init overo_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -421,7 +427,7 @@ static void __init overo_init(void)
platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
omap_serial_init();
overo_flash_init();
- usb_musb_init(MUSB_OTG, 100);
+ usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
overo_ads7846_init();
overo_init_smsc911x();
Index: felipe_musb/arch/arm/mach-omap2/board-rx51.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-rx51.c
+++ felipe_musb/arch/arm/mach-omap2/board-rx51.c
@@ -79,11 +79,17 @@ static struct omap_board_mux board_mux[]
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_PERIPHERAL,
+ .power = 0,
+};
+
static void __init rx51_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
- usb_musb_init(MUSB_PERIPHERAL, 0);
+ usb_musb_init(&musb_board_data);
rx51_peripherals_init();
/* Ensure SDRC pins are mux'd for self-refresh */
Index: felipe_musb/arch/arm/mach-omap2/board-zoom-peripherals.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ felipe_musb/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -264,9 +264,15 @@ static int __init omap_i2c_init(void)
return 0;
}
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
void __init zoom_peripherals_init(void)
{
omap_i2c_init();
omap_serial_init();
- usb_musb_init(MUSB_OTG, 100);
+ usb_musb_init(&musb_board_data);
}
Index: felipe_musb/arch/arm/mach-omap2/usb-musb.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/usb-musb.c
+++ felipe_musb/arch/arm/mach-omap2/usb-musb.c
@@ -75,7 +75,7 @@ static struct platform_device musb_devic
.resource = musb_resources,
};
-void __init usb_musb_init(enum musb_mode mode, unsigned power)
+void __init usb_musb_init(struct omap_musb_board_data *board_data)
{
if (cpu_is_omap243x())
musb_resources[0].start = OMAP243X_HS_BASE;
@@ -88,15 +88,16 @@ void __init usb_musb_init(enum musb_mode
* musb_core.c have been converted to use use clkdev.
*/
musb_plat.clock = "ick";
- musb_plat.power = power >> 1;
- musb_plat.mode = mode;
+ musb_plat.board_data = board_data;
+ musb_plat.power = board_data->power >> 1;
+ musb_plat.mode = board_data->mode;
if (platform_device_register(&musb_device) < 0)
printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
}
#else
-void __init usb_musb_init(enum musb_mode mode, unsigned power)
+void __init usb_musb_init(struct omap_musb_board_data *board_data)
{
}
#endif /* CONFIG_USB_MUSB_SOC */
Index: felipe_musb/arch/arm/plat-omap/include/plat/usb.h
===================================================================
--- felipe_musb.orig/arch/arm/plat-omap/include/plat/usb.h
+++ felipe_musb/arch/arm/plat-omap/include/plat/usb.h
@@ -43,7 +43,15 @@ struct ehci_hcd_omap_platform_data {
#define UDC_BASE OMAP2_UDC_BASE
#define OMAP_OHCI_BASE OMAP2_OHCI_BASE
-extern void usb_musb_init(enum musb_mode mode, unsigned power);
+struct omap_musb_board_data {
+ u8 interface_type;
+ u8 mode;
+ u8 power;
+};
+
+enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
+
+extern void usb_musb_init(struct omap_musb_board_data *board_data);
extern void usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata);
Index: felipe_musb/include/linux/usb/musb.h
===================================================================
--- felipe_musb.orig/include/linux/usb/musb.h
+++ felipe_musb/include/linux/usb/musb.h
@@ -84,6 +84,9 @@ struct musb_hdrc_platform_data {
/* MUSB configuration-specific details */
struct musb_hdrc_config *config;
+
+ /* Architecture specific board data */
+ void *board_data;
};
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic