[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-thinkpad
Subject: Re: [ltp] Enabling Serial Port?
From: Juan Pablo Martinez Sanchez <is04796 () salleURL ! edu>
Date: 2003-03-26 12:54:35
Message-ID: Pine.LNX.4.44.0303261348560.5864-100000 () cygnus ! salleURL ! edu
[Download RAW message or body]
Hello,
I have a ThinkPad 600x and i had the same problem, the serial port was
disabled by default to save energy and any linux didn't enable it at boot
time.
If i were you i would use directly the setpnp and lspnp utilities to
enable the serial port.
Good luck.
On Tue, 25 Mar 2003, Huntress Gary B NPRI wrote:
> Thinkpad 600e running RH 7.3
>
> I have never tried to use the serial port on the back before and tonight I tried to \
> sync my palm pilot using gpilot. I used setserial to lock the speed at 56k and I \
> verified on the palm that it was set to 56k too. I'm assuming the serial port is \
> /dev/ttyS0.
> I appear to get no communication at all (no hotsync) but there really is no way to \
> tell.
> It seems unlikely to me but could the serial port be disabled? If so would I use \
> tpctl to enable it?
> Thanks,
>
> Gary H.
> --
> The linux-thinkpad mailing list home page is at:
> http://mailman.linux-thinkpad.org/mailman/listinfo/linux-thinkpad
>
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic