[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-tegra
Subject:    Re: [PATCH V5 08/18] clk: tegra: Add suspend resume support for DFLL
From:       Dmitry Osipenko <digetx () gmail ! com>
Date:       2019-06-29 21:45:39
Message-ID: e641e95e-57e5-4654-c951-a3b63d3b37c4 () gmail ! com
[Download RAW message or body]

29.06.2019 16:28, Dmitry Osipenko пишет:
> 28.06.2019 5:12, Sowjanya Komatineni пишет:
>> This patch creates APIs for supporting Tegra210 clock driver to
>> perform DFLL suspend and resume operation.
>>
>> During suspend, DFLL mode is saved and on resume Tegra210 clock driver
>> invokes DFLL resume API to re-initialize DFLL to enable target device
>> clock in open loop mode or closed loop mode.
>>
>> Acked-by: Thierry Reding <treding@nvidia.com>
>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>> ---
>>  drivers/clk/tegra/clk-dfll.c | 78 ++++++++++++++++++++++++++++++++++++++++++++
>>  drivers/clk/tegra/clk-dfll.h |  2 ++
>>  2 files changed, 80 insertions(+)
>>
>> diff --git a/drivers/clk/tegra/clk-dfll.c b/drivers/clk/tegra/clk-dfll.c
>> index f8688c2ddf1a..a1f37cf99b00 100644
>> --- a/drivers/clk/tegra/clk-dfll.c
>> +++ b/drivers/clk/tegra/clk-dfll.c
>> @@ -277,6 +277,7 @@ struct tegra_dfll {
>>  	unsigned long			dvco_rate_min;
>>  
>>  	enum dfll_ctrl_mode		mode;
>> +	enum dfll_ctrl_mode		resume_mode;
>>  	enum dfll_tune_range		tune_range;
>>  	struct dentry			*debugfs_dir;
>>  	struct clk_hw			dfll_clk_hw;
>> @@ -1864,6 +1865,83 @@ static int dfll_fetch_common_params(struct tegra_dfll *td)
>>  }
>>  
>>  /*
>> + * tegra_dfll_suspend
>> + * @pdev: DFLL instance
>> + *
>> + * dfll controls clock/voltage to other devices, including CPU. Therefore,
>> + * dfll driver pm suspend callback does not stop cl-dvfs operations.
>> + */
>> +void tegra_dfll_suspend(struct platform_device *pdev)
>> +{
>> +	struct tegra_dfll *td = dev_get_drvdata(&pdev->dev);
>> +
>> +	if (!td)
>> +		return;
>> +
>> +	if (td->mode <= DFLL_DISABLED)
>> +		return;
>> +
>> +	td->resume_mode = td->mode;
>> +	switch (td->mode) {
>> +	case DFLL_CLOSED_LOOP:
>> +		dfll_set_mode(td, DFLL_CLOSED_LOOP);
>> +		dfll_set_frequency_request(td, &td->last_req);
>> +
>> +		dfll_unlock(td);
>> +		break;
>> +	default:
>> +		break;
>> +	}
>> +}
>> +
>> +/**
>> + * tegra_dfll_resume - reprogram the DFLL after context-loss
>> + * @pdev: DFLL instance
>> + *
>> + * Re-initialize and enable target device clock in open loop mode. Called
>> + * directly from SoC clock resume syscore operation. Closed loop will be
>> + * re-entered in platform syscore ops as well after CPU clock source is
>> + * switched to DFLL in open loop.
>> + */
>> +void tegra_dfll_resume(struct platform_device *pdev, bool on_dfll)
>> +{
>> +	struct tegra_dfll *td = dev_get_drvdata(&pdev->dev);
>> +
>> +	if (!td)
>> +		return;
>> +
>> +	if (on_dfll) {
>> +		if (td->resume_mode == DFLL_CLOSED_LOOP)
>> +			dfll_lock(td);
>> +		td->resume_mode = DFLL_DISABLED;
>> +		return;
>> +	}
>> +
>> +	reset_control_deassert(td->dvco_rst);
>> +
>> +	pm_runtime_get(td->dev);
> 
> pm_runtime_get_sync()?
> 
> Otherwise looks like you're risking a lot here because pm_runtime_get() is an
> asynchronous request.

It looks like DFLL driver should be masked as IRQ-safe using pm_runtime_irq_safe()
and then the synchronous resume could be used..
[prev in list] [next in list] [prev in thread] [next in thread]