[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-sparc
Subject: Don't get T2000 Enterprise booting (with any? kernel)
From: Denny Schierz <linuxmail () 4lin ! net>
Date: 2012-02-27 7:25:12
Message-ID: B80DFA69-6F19-48DE-A39E-D9B32904BD60 () 4lin ! net
[Download RAW message or body]
hi,
I have a Sun Enterprise T2000 and I try to get Debian onto the disks, but it fails \
with kernel 2.6.32, 2.6.30, 3.2 and the latest stable kernel. I have build for my \
Sunfire v245 a NFS rescue system and I was 3 or 4 times able to boot into my NFS root \
from the T2000. But in most cases it fails:
[ 60.554011] IP-Config: Got DHCP answer from 192.168.1.1, my address is \
192.168.1.12 [ 61.137949] IP-Config: Complete:
[ 61.138047] device=eth3, addr=192.168.1.12, mask=255.255.255.0, \
gw=192.168.1.1, [ 61.138243] host=e01, domain=foo, nis-domain=(none),
[ 61.138428] bootserver=192.168.1.1, rootserver=192.168.1.1, \
rootpath=/srv/fai-sparc/nfsroot [ 61.138774] Warning: unable to open an initial \
console. [ 61.144119] Kernel panic - not syncing: Attempted to kill init!
[ 61.144242] Call Trace:
[ 61.144294] [000000000045b8f8] do_exit+0xa8/0x6bc
[ 61.144344] [000000000045bf7c] do_group_exit+0x70/0xa8
[ 61.144405] [000000000045bfcc] SyS_exit_group+0x18/0x28
[ 61.144472] [0000000000405fd4] linux_sparc_syscall32+0x34/0x40
[ 61.144583] Press Stop-A (L1-A) to return to the boot prom
[ 83.503215] rtc-sun4v rtc-sun4v: setting system clock to 2012-02-25 11:06:56 UTC \
(1330168016) [ 85.678958] e1000e: eth3 NIC Link is Up 100 Mbps Full Duplex, Flow \
Control: Rx/Tx [ 85.679152] e1000e 0001:07:00.1: eth3: 10/100 speed: disabling TSO
[ 85.693972] Sending DHCP requests ., OK
[ 87.202052] IP-Config: Got DHCP answer from 192.168.1.1, my address is \
192.168.1.12 [ 87.786547] IP-Config: Complete:
[ 87.786669] device=eth3, addr=192.168.1.12, mask=255.255.255.0, \
gw=192.168.1.1, [ 87.786865] host=e01, domain=foo, nis-domain=(none),
[ 87.786950] bootserver=192.168.1.1, rootserver=192.168.1.1, \
rootpath=/srv/fai-sparc/nfsroot [ 87.787123] Warning: unable to open an initial \
console. [ 87.792121] Kernel panic - not syncing: Attempted to kill init!
[ 87.792197] Call Trace:
[ 87.792249] [000000000045b8f8] do_exit+0xa8/0x6bc
[ 87.792299] [000000000045bf7c] do_group_exit+0x70/0xa8
[ 87.792360] [000000000045bfcc] SyS_exit_group+0x18/0x28
[ 87.792427] [0000000000405fd4] linux_sparc_syscall32+0x34/0x40
[ 87.792539] Press Stop-A (L1-A) to return to the boot prom
Complete boot dmesg : http://pastebin.com/NWp79bG3
I also tried different Debian installer, but older Lenny images and new Squeeze, \
fails:
┌────────────────────┤ Loading additional \
components ├────────────────────┐ │ \
│ │ 16% │
│ │
│ [ 1753.931851] Unable to handle kernel paging request at virtual address \
000000f203204000 [ 1753.932033] tsk->{mm,active_mm}->context = 000000000000018d \
│ [ 1753.932134] tsk->{mm,active_mm}->pgd = \
fffff801fd52a000──────────────────┘ [ \
1753.932670] Kernel panic - not syncing: Aiee, killing interrupt handler! [ \
1753.933114] Press Stop-A (L1-A) to return to the boot prom
mostly accessing the hardware/ or detection from it.
So, I need some suggestions to get it working.
If it helps, I can make this host public for some people, to try out, what is the \
problem.
Also, I put the latest firmware on it, but it helps only a few times to get booting \
into the NFSroot.
cu denny
["signature.asc" (signature.asc)]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG/MacGPG2 v2.0.17 (Darwin)
iEYEARECAAYFAk9LL9gACgkQKlzhkqt9P+CxmwCfTlYU/Gqp0W+lpHaHY/AaTvtm
HAsAoIzr0Bw4RsAHdEEt1kOeGrSpPwob
=wSFB
-----END PGP SIGNATURE-----
--
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic