[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-sound
Subject:    Re: Yamaha opl3
From:       Bill Nottingham <notting () redhat ! com>
Date:       1999-01-13 16:18:31
[Download RAW message or body]

Eric Barendt (ebarendt@speedchoice.com) said: 
> Ok... I've been fighting with this on-board sound card since I installed
> linux a few months ago.. It's on my Tyan 1696 motherboard.  What do I
> need to do to get this sound card working? I've found things about
> compiling the opti something or other drivers into the kernel, but that
> didn't work (unless I did it wrong).  I also had some 3rd party
> software, which worked.. but I'd prefer to just have the kernel control
> everything.

Assuming it's an OPL3-SA2/3/x (most likely), you should be able
to configure the card with isapnptools and use the OPL3-SAx driver
in 2.1.late/2.2.0pre. (If you're using 2.2.0pre, you'd want to get
at least 2.2.0pre6, as that fixes bugs in the detection code, IIRC.)

Bill

[prev in list] [next in list] [prev in thread] [next in thread]