[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-smp
Subject: Re: heya, WARNING: unexpected IO-APIC on boot
From: Tal Lancaster <talrmr () pacbell ! net>
Date: 2001-04-27 14:07:10
[Download RAW message or body]
I have the same board, setup, and same problem.
You should be able to boot up by adding the NOAPIC boot option:
append="noapic"
in lilo.conf
Tal
Slug wrote:
>
> In case you really wanted mail about this.
>
> I just installed RedHat 7.1 which shipped with 2.4.2
> Boots fine with non-SMP, but fails to boot with SMP
>
> mobo: ASUS CUV4X-D dual socket 370
> cpus: two intel pIII 1GHz
>
> the final few lines of boot output
>
> ================================================
> ENABLING IO-APIC IRQs
> ...changing IO-APIC physical APIC ID to 2 ... ok.
> Synchronizing Arb IDs.
> ..TIMER: vector=49 pin1=2 pin2=0
> testing the IO APIC.......................
>
> WARNING: unexpected IO-APIC, please mail
> to linux-smp@vger.kernel.org
> .................................... done.
> calibrating APIC timer ...
> ..... CPU clock speed is 1004.4442 MHz.
> ..... host bus clock speed is 133.9257 MHz.
> cpu: 0, clocks: 1339257, slice: 446419
> CPU0<T0:1339248,T1:892816,D:13,S:446419,C:1339257>
> ===================================================
>
> at this point, it hangs indefinitely, it's dead. no keyboard input.
> this behavior is consistent.
>
> If you want anymore info about this, let me know, meanwhile I'll attempt
> to build 2.4.3 in case that helps.
>
> -slug
> slug@pbase.com
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-smp" in
> the body of a message to majordomo@vger.kernel.org
--
Tal Lancaster (talrmr@pacbell.net)
The RenderMan Repository http://www.renderman.org/RMR/
-
To unsubscribe from this list: send the line "unsubscribe linux-smp" in
the body of a message to majordomo@vger.kernel.org
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic