[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-smp
Subject: Load related OOPS on 2.4.2-pre6 SMP and another "unexpected
From: amep () softhome ! net
Date: 2001-03-22 1:57:48
[Download RAW message or body]
[Attachment #2 (Multipart/Mixed)]
I am having a OOPS on my system when I am using both processor
heavily. I have captured and traced 5 OOPSes. I have been reproducing
it using "make -j2" on the kernel. The compile runs fine for 30 sec or
so and then the kernel goes belly-up. Sometimes it won't OOPS and
instead will print "Unable to handle kernel paging request" or
something like that and nothing else. The crashes are hard
freezes. I've been using a null modem cable to log console messages on
another computer. My system is:
TYAN Tiger 230
two Pentium III 1GHz CPUs (133MHz bus, Socket 370)
a 256MB Micron SDRAM DIMM
Voodoo 3 graphics card
Soundblaster Live! Value (most of the modules where not loaded when
the OOPSes where captured. I think soundcore.o may have been loaded.)
an RTL-8139 ethernet card (driver builtin to the kernel)
It may be of interest that I am getting the "unexpected IO-APIC"
message at boot time. You can find it in either of the attached boot
logs (oops1.log and oops3.log). Also I this system ran for a little
while with a kernel that had been compiled for a single Pentium 133
(no MMX) and I had some crashes of a similar nature, but I didn't log
any of them.
I understand that this may be a hardware problem, but it seemed to
match up with other problems people had mentioned on this list, so I
thought I'd give software a try first.
I've attached 2 of the 5 OOPSes, their associated logs, /proc/pci and
/proc/cpuinfo. Two of the other oopses were very similar to oops1, so
I think that may be closer to the truth since it was repeated. I'll be
glad to give any info you need (more OOPSes, anything), just drop me a
mail.
Any recommendations, work-arounds or fixes would be greatly
appreciated. Thank you.
-Arthur
PS: Please tell me if I should send the logs as part of the text
instead of as MIME attachments.
["oops1-trace.txt" (Text/Plain)]
ksymoops 2.3.7 on i686 2.4.3-pre6. Options used
-v /usr/src/kernel-source-2.4.2/vmlinux (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.3-pre6/ (default)
-m /usr/src/kernel-source-2.4.2/System.map (specified)
WARNING: unexpected IO-APIC, please mail
cpu: 0, clocks: 1332944, slice: 444314
cpu: 1, clocks: 1332944, slice: 444314
8139too Fast Ethernet driver 0.9.15 loaded
CPU: 0
EIP: 0010:[<c01164d0>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010007
eax: 00000018 ebx: 00000007 ecx: 0000002c edx: 0000000a
esi: cf4f8000 edi: c15cd960 ebp: c146bfc8 esp: c146bf88
ds: 0018 es: 0018 ss: 0018
Process bdflush (pid: 5, stackpage=c146b000)
Stack: 00000000 cb630000 00000000 00000001 c146a000 0000002c 00000000 c146a000
c032a440 00000000 00000000 00000002 00000001 c146a000 00000002 00000001
00000007 c013c301 c145bf74 c0105000 0008e000 00000000 00010f00 c145bf74
Call Trace: [<c013c301>] [<c0105000>] [<c0105000>] [<c0107566>] [<c013c210>]
Code: 8b 5a f4 8d 72 c4 85 db 0f 84 32 03 00 00 8b 12 81 fa a0 1b
>>EIP; c01164d0 <schedule+160/630> <=====
Trace; c013c301 <bdflush+f1/100>
Trace; c0105000 <empty_bad_page+0/1000>
Trace; c0105000 <empty_bad_page+0/1000>
Trace; c0107566 <kernel_thread+26/30>
Trace; c013c210 <bdflush+0/100>
Code; c01164d0 <schedule+160/630>
00000000 <_EIP>:
Code; c01164d0 <schedule+160/630> <=====
0: 8b 5a f4 mov 0xfffffff4(%edx),%ebx <=====
Code; c01164d3 <schedule+163/630>
3: 8d 72 c4 lea 0xffffffc4(%edx),%esi
Code; c01164d6 <schedule+166/630>
6: 85 db test %ebx,%ebx
Code; c01164d8 <schedule+168/630>
8: 0f 84 32 03 00 00 je 340 <_EIP+0x340> c0116810 <schedule+4a0/630>
Code; c01164de <schedule+16e/630>
e: 8b 12 mov (%edx),%edx
Code; c01164e0 <schedule+170/630>
10: 81 fa a0 1b 00 00 cmp $0x1ba0,%edx
["oops1.log" (Text/Plain)]
Linux version 2.4.3-pre6 (amp@newbie) (gcc version 2.97 20010108 (experimental)) #2 \
SMP Wed Mar 21 01:20:30 CST 2001 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at 000f5450
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Intel MunltiProcessor Spification v1.1
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
SEP present.
MTRR prsesent.
PGEpresent.
MCA n present.
V present.
Bootup CPU
Processor #1 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
SEP present.
MTRR present.
PGE present.
MCA present.
CMOV present.
Bus #0 is PCI
Bus #1 is PCI
Bus #2 is ISA
I/O APIC #2 Version 17 at 0xFEC00000.
Int: type 3, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 00
Int: type 0, pol 0, trig 0, bus 2, IRQ 01, APIC ID 2, APIC INT 01
Int: type 0, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 02
Int: type 0, pol 0, trig 0, bus 2, IRQ 03, APIC ID 2, APIC INT 03
Int: type 0, pol 0, trig 0, bus 2, IRQ 04, APIC ID 2, APIC INT 04
Int: type 0, pol 0, trig 0, bus 2, IRQ 06, APIC ID 2, APIC INT 06
Int: type 0, pol 0, trig 0, bus 2, IRQ 07, APIC ID 2, APIC INT 07
Int: type 0, pol 1, trig 1, bus 2, IRQ 08, APIC ID 2, APIC INT 08
Int: type 0, pol 0, trig 0, bus 2, IRQ 09, APIC ID 2, APIC INT 09
Int: type 0, pol 0, trig 0, bus 2, IRQ 0c, APIC ID 2, APIC INT 0c
Int: type 0, pol 0, trig 0, bus 2, IRQ 0d, APIC ID 2, APIC INT 0d
Int: type 0, pol 0, trig 0, bus 2, IRQ 0e, APIC ID 2, APIC INT 0e
Int: type 0, pol 0, trig 0, bus 2, IRQ 0f, APIC ID 2, APIC INT 0f
Int: type 0, pol 3, trig 3, bus 2, IRQ 05, APIC ID 2, APIC INT 05
Int: type 0, pol 3, trig 3, bus 2, IRQ 0b, APIC ID 2, APIC INT 0b
Int: type 0, pol 3, trig 3, bus 2, IRQ 0a, APIC ID 2, APIC INT 0a
Lint: type 3, pol 0, trig 0, bus 2, IRQ 00, APIC ID ff, APIC LINT 00
Lint: type 1, pol 0, trig 0, bus 2, IRQ 00, APIC ID ff, APIC LINT 01
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Kernel command line: BOOT_IMAGE=LinuxNEW ro root=302 BOOT_FILE=/vmlinuz.new \
console=ttyS0,38400N8 console=tty0 single Initializing CPU#0
Detected 999.687 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1992.29 BogoMIPS
Memory: 254808k/262080k available (1519k kernel code, 6884k reserved, 445k data, 224k \
init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0387fbff 00000000 00000000 00000000
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reportg enabled on CPU#0.
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel Pentium III (Coppermine) stepping 06
per-CPU timeslice cutoff: 731.73 usecs.
Getting VERSION: 40011
Getting VERSION: 40011
Getting ID: 0
Getting ID: f000000
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
CPU present map: 3
Booting processor 1/1 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Watiting for send
+Deasserting INIT.
Waiting for send to finish...
+#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Initializing CPU#1
StarStup point 1.
C#1 (phys ID: 1) waiting for CALLOUT
Waiting for send to finish...
+Sending STARTUP #2.
After apic_write.
Startup poi nt 1.
Waiting or send to finish...
+After Startup.
Before Callo ut 1.
After Caut 1.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1998.84 BogoMIPS
Stack at about c1449fb8
CPU: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#1.
CPU: After vendor init, caps: 0387fbff 00000000 00000000 00000000
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
OK.
CPU1: Inte
l Pentium III (ppermine) stepping 06
CPU has booted.
Before bogomips.
Total of 2 processors activated (3991.14 BogoMIPS).
Before bogocount - setting activated=1.
Boot done.
ENABLING IO-APIC IRQs
...changging IO-APIC phyPIC ID to 2 ... ok.
Synchronizing Arb IDs.
..TIMER: vector=49 pin1=2 pin2=0
testing the IO APIC.......................
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.................................... done.
calibrating APIC timer ...
..... CPU clock speed is 999.7088 MHz.
..... host bus clock speed is 133.2944 MHz.
cpu: 0, clocks: 1332944, slice: 444314
CPU0<T0:1332944,T1:888624,D:6,S:444314,C:1332944>
cpu: 1, clocks: 1332944, slice: 444314
CPU1<T0:1332944,T1:444304,D:12,S:444314,C:1332944>
checking TSC synchronization across CPUs: passed.
Setting commenced=1, go go go
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
isapnp: Scanning for Pnp cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
IA-32 Microcode Update Driver: v1.08 <tigran@veritas.com>
Starting kswapd v1.8
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
parport_pc: Via 686A parallel port: io=0x378, irq=7
pty: 256 Unix98 ptys configured
block: queued sectors max/low 169226kB/56408kB, 512 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD136AA, ATA DISK drive
hdc: GCD-R542B, ATAPI CD/DVD-ROM drive
hdc: set_drive_speed_status: status=0x10 { SeekComplete }
ide1: Drive 0 didn't accept speed setting. Oh, well.
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 26564832 sectors (13601 MB) w/2048KiB Cache, CHS=26354/16/63, UDMA(33)
hdc: ATAPI 4X CD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
FDC 0 is a post-1991 82077
Serial driver version 5.05 (2000-12-13) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP \
enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
gameport0: NS558 PCI at 0xe400 size 8 speed 1242 kHz
input0: Analog 4-axis 4-button joystick at gameport0.0 [TSC timer, 996 MHz clock, 831 \
ns res] Real Time Clock Driver v1.10d
8139too Fast Ethernet driver 0.9.15 loaded
eth0: RealTek RTL8139 Fast Ethernet at 0xd0800000, 00:50:fc:05:bc:27, IRQ 11
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB UHCI at I/O 0xd400, IRQ 10
uhci.c: detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB UHCI at I/O 0xd800, IRQ 10
uhci.c: detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hid
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
js0: Joystick device for input0
event0: Event device for input0
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
ACPI: Core Subsystem version [20010208]
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ACPI: Subsystem enabled
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
ACPI: Using ACPI idle
devfs: boot_options: 0x0
ACPI: If experiencing system slowness, try adding "acpi=no-idle" to cmdline
ACPI: System firmware supports: S0 S1 S5
EXT2-fs warning: feature flags set on rev 0 fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 224k freed
EXT2-fs warning: feature flags set on rev 0 fs, running e2fsck is recommended
EXT2-fs warning: feature flags set on rev 0 fs, running e2fsck is recommended
EXT2-fs warning: feature flags set on rev 0 fs, running e2fsck is recommended
Adding Swap: 131064k swap-space (priority -1)
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
general protection fault: 0000
CPU: 0
EIP: 0010:[<c01164d0>]
EFLAGS: 00010007
eax: 00000018 ebx: 00000007 ecx: 0000002c edx: 0000000a
esi: cf4f8000 edi: c15cd960 ebp: c146bfc8 esp: c146bf88
ds: 0018 es: 0018 ss: 0018
Process bdflush (pid: 5, stackpage=c146b000)
Stack: 00000000 cb630000 00000000 00000001 c146a000 0000002c 00000000 c146a000
c032a440 00000000 00000000 00000002 00000001 c146a000 00000002 00000001
00000007 c013c301 c145bf74 c0105000 0008e000 00000000 00010f00 c145bf74
Call Trace: [<c013c301>] [<c0105000>] [<c0105000>] [<c0107566>] [<c013c210>]
Code: 8b 5a f4 8d 72 c4 85 db 0f 84 32 03 00 00 8b 12 81 fa a0 1b
["oops3-trace.txt" (Text/Plain)]
ksymoops 2.3.7 on i686 2.4.3-pre6. Options used
-v /usr/src/kernel-source-2.4.2/vmlinux (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.3-pre6/ (default)
-m /usr/src/kernel-source-2.4.2/System.map (specified)
WARNING: unexpected IO-APIC, please mail
cpu: 0, clocks: 1332971, slice: 444323
cpu: 1, clocks: 1332971, slice: 444323
8139too Fast Ethernet driver 0.9.15 loaded
Unable to handle kernel paging request at virtual address fffffff4
c01164d0
*pde = 00003063
Oops: 0000
EIP: 0010:[<c01164de0>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00
eax: 0000000a ebx: 00000001 ecx: 0000001e edx: 00000000
esi: 6c2029e4 edi: c91ddac0 ebp: c4695fbc esp: c4695f7c
ds: 0018 es: 0018 ss: 0018
Process cc1 (pid: 1466, stackpage=c4695000)
Stack: c8f4e900 c4172000 00000000 00000001 c4694000 0000002e 00000000 c4694000
c032a440 0000000a c010ad9c 0000000a 00000000 c4694000 40127880 00000000
bfffe9e4 c0109281 00000000 40017000 00001000 40127880 00000000 bfffe9e4
Call Trace: [<c010ad9c>] [<c0109281>]
Code: 8b 5a f4 8d 72 c4 85 db 0f 84 32 03 00 00 8b 12 81 fa a0 1b
>>EIP; c01164de0 <END_OF_CODE+b3094ac00/????> <=====
Trace; c010ad9c <do_IRQ+bc/110>
Trace; c0109281 <reschedule+5/c>
Code; 01164de0 Before first symbol
00000000 <_EIP>:
Code; 01164de0 Before first symbol
0: 8b 5a f4 mov 0xfffffff4(%edx),%ebx
Code; 01164de3 Before first symbol
3: 8d 72 c4 lea 0xffffffc4(%edx),%esi
Code; 01164de6 Before first symbol
6: 85 db test %ebx,%ebx
Code; 01164de8 Before first symbol
8: 0f 84 32 03 00 00 je 340 <_EIP+0x340> 01165120 Before first symbol
Code; 01164dee Before first symbol
e: 8b 12 mov (%edx),%edx
Code; 01164df0 Before first symbol
10: 81 fa a0 1b 00 00 cmp $0x1ba0,%edx
["oops3.log" (Text/Plain)]
Linux version 2.4.3-pre6 (amp@newbie) (gcc version 2.97 20010108 (experimental)) #2 \
SMP Wed Mar 21 01:20:30 CST 2001 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at 000f5450
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
SEP present.
MTRR present.
I PGE present. MCA present.
CMOV present.
Bootup CPU
Processor #1 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
SEP present.
MTRR present.
PGE present.
MCA present.
CMOV present.T
Bus #0 is PCI
Bus #1 is PCI
Bus #2 is I
I/O APIC #2 VTersion 17 at 0xC00000.
Int: type 3, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 00
Int: type 0, pol 0, trig 0, bus 2, IRQ 01, APIC ID 2, APIC INT 01
Int: type 0, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 02
Int: type 0, pol 0, trig 0, bus 2, IRQ 03, APIC ID 2, APIC INT 03
Int: type 0, pol 0, trig 0, bus 2, IRQ 04, APIC ID 2, APIC INT 04
Int: type 0, pol 0, trig 0, bus 2, IRQ 06, APIC ID 2, APIC INT 06
Int: type 0, pol 0, trig 0, bus 2, IRQ 07, APIC ID 2, APIC INT 07
Int: type 0, pol 1, trig 1, bus 2, IRQ 08, APIC ID 2, APIC INT 08
Int: type 0, pol 0, trig 0, bus 2, IRQ 09, APIC ID 2, APIC INT 09
Int: type 0, pol 0, trig 0, bus 2, IRQ 0c, APIC ID 2, APIC INT 0c
Int: type 0, pol 0, trig 0, bus 2, IRQ 0d, APIC ID 2, APIC INT 0d
Int: type 0, pol 0, trig 0, bus 2, IRQ 0e, APIC ID 2, APIC INT 0e
Int: type 0, pol 0, trig 0, bus 2, IRQ 0f, APIC ID 2, APIC INT 0f
Int: type 0, pol 3, trig 3, bus 2, IRQ 05, APIC ID 2, APIC INT 05
Int: type 0, pol 3, trig 3, bus 2, IRQ 0b, APIC ID 2, APIC INT 0b
Int: type 0, pol 3, trig 3, bus 2, IRQ 0a, APIC ID 2, APIC INT 0a
Lint: type 3, pol 0, trig 0, bus 2, IRQ 00, APIC ID ff, APIC LINT 00
Lint: type 1, pol 0, trig 0, bus 2, IRQ 00, APIC ID ff, APIC LINT 01
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Kernel command line: BOOT_IMAGE=LinuxNEW ro root=302 BOOT_FILE=/vmlinuz.new \
console=ttyS0,38400N8 console=tty0 single Initializing CPU#0
Detected 999.690 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1992.29 BogoMIPS
Memory: 254808k/262080k available (1519k kernel code, 6884k reserved, 445k data, 224k \
init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0387fbff 00000000 00000000 00000000
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel Pentium III (Coppermine) stepping 06
per-CPU timeslice cutoff: 731.73 usecs.
Getting VERSION: 40011
Getting VERSION: 40011
Getting ID: 0
Getting ID: f000000
Getting LVT0: 700
Getting LVT1: 400
einabled ExtINT oCPU#0
ESR value tbefore enablingctor: 00000000
ESR value after enabling vector: 00000000
CPU present map: 3
Booting processor 1/1 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Waiting for send to finish...
+Deasserting INIT.
Waiting for send to finish...
+#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Initializing CPU#1
Starp point 1.
CPU#1 (phys ID: 1) waiting for CALLOUT
Waiting for send to finish...
+Sending STARTUP #2.
After apic_write.
Startup poi 1.
Waiting for nsend to finish.
+After Startup.
Before Callout 1.
After Callout 1.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1998.84 BogoMIPS
Stack at about c1449fb8
CPU: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#1.
CPU: After vendor init, caps: 0387fbff 00000000 00000000 00000000
CPU serial number disabled.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
OK.
CPU1: Intel Pentium III (Coppermine) stepping 06
CPU has booted.
Before bogomips.
Total of 2 processors activated (3991.14 BogoMIPS).
Before bogocount - setting activated=1.
Boot done.
ENABLING IO.-APIC IRQs
...anging IO-APIC physical APIC ID to 2 ... ok.
Synchronizing Arb IDs.
..TIMER: vector=49 pin1=2 pin2=0
testing the IO APIC.......................
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.................................... done.
calibrating APIC timer ...
..... CPU clock speed is 999.7293 MHz.
..... host bus clock speed is 133.2971 MHz.
cpu: 0, clocks: 1332971, slice: 444323
CPU0<T0:1332960,T1:888624,D:13,S:444323,C:1332971>
cpu: 1, clocks: 1332971, slice: 444323
CPU1<T0:1332960,T1:444304,D:10,S:444323,C:1332971>
checking TSC synchronization across CPUs: passed.
Setting commenced=1, go go go
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
isapnp: Scanning for Pnp cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
IA-32 Microcode Update Driver: v1.08 <tigran@veritas.com>
Starting kswapd v1.8
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
parport_pc: Via 686A parallel port: io=0x378, irq=7
pty: 256 Unix98 ptys configured
block: queued sectors max/low 169226kB/56408kB, 512 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD136AA, ATA DISK drive
hdc: GCD-R542B, ATAPI CD/DVD-ROM drive
hdc: set_drive_speed_status: status=0x10 { SeekComplete }
ide1: Drive 0 didn't accept speed setting. Oh, well.
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 26564832 sectors (13601 MB) w/2048KiB Cache, CHS=26354/16/63, UDMA(33)
hdc: ATAPI 4X CD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/hcost0/bus0/targe0/lun0: p1 p2 p3 p4
FDC 0 is a post-1991 82077
Serial driver version 5.05 (2000-12-13) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP \
enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
gameport0: NS558 PCI at 0xe400 size 8 speed 1242 kHz
input0: Analog 4-axis 4-button joystick at gameport0.0 [TSC timer, 996 MHz clock, 831 \
ns res] Real Time Clock Driver v1.10d
8139too Fast Ethernet driver 0.9.15 loaded
eth0: RealTek RTL8139 Fast Ethernet at 0xd0800000, 00:50:fc:05:bc:27, IRQ 11
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB UHCI at I/O 0xd400, IRQ 10
uhci.c: detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB UHCI at I/O 0xd800, IRQ 10
uhci.c: detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hid
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
js0: Joystick device for input0
event0: Event device for input0
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
ACPI: Core Subsystem version [20010208]
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ACPI: Subsystem enabled
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
ACPI: Using ACPI idle
devfs: boot_options: 0x0
ACPI: If experiencing system slowness, try adding "acpi=no-idle" to cmdline
ACPI: System firmware supports: S0 S1 S5
EXT2-fs warning: feature flags set on rev 0 fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 224k freed
EXT2-fs warning: feature flags set on rev 0 fs, running e2fsck is recommended
EXT2-fs warning: feature flags set on rev 0 fs, running e2fsck is recommended
EXT2-fs warning: feature flags set on rev 0 fs, running e2fsck is recommended
Adding Swap: 131064k swap-space (priority -1)
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
---- ALL DRIVES ARE STILL MOUNTED ----
Unable to handle kernel paging request at virtual address fffffff4
printing eip:
c01164d0
*pde = 00003063
*pte = 000000 00
Oops: 0000
U: 0
EIP: 0010:[<c01164de0>]
EFLAGS: 00
eax: 0000000a ebx: 00000001 ecx: 0000001e edx: 00000000
esi: 6c2029e4 edi: c91ddac0 ebp: c4695fbc esp: c4695f7c
ds: 0018 es: 0018 ss: 0018
Process cc1 (pid: 1466, stackpage=c4695000)
Stack: c8f4e900 c4172000 00000000 00000001 c4694000 0000002e 00000000 c4694000
c032a440 0000000a c010ad9c 0000000a 00000000 c4694000 40127880 00000000
bfffe9e4 c0109281 00000000 40017000 00001000 40127880 00000000 bfffe9e4
Call Trace: [<c010ad9c>] [<c0109281>]
Code: 8b 5a f4 8d 72 c4 85 db 0f 84 32 03 00 00 8b 12 81 fa a0 1b
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 999.696
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1992.29
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 999.696
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 3
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1998.84
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev 196).
Master Capable. Latency=8.
Prefetchable 32 bit memory at 0xd0000000 [0xd3ffffff].
Bus 0, device 1, function 0:
PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (rev 0).
Master Capable. No bursts. Min Gnt=4.
Bus 0, device 7, function 0:
ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 64).
Bus 0, device 7, function 1:
IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6).
Master Capable. Latency2.
I/O at 0xd000 [0xd00f].
Bus 0, device 7, function 2:
USB Controller: VIA Technologies, Inc. UHCI USB (rev 22).
IRQ 19.
Master Capable. Latency2.
I/O at 0xd400 [0xd41f].
Bus 0, device 7, function 3:
USB Controller: VIA Technologies, Inc. UHCI USB (#2) (rev 22).
IRQ 19.
Master Capable. Latency2.
I/O at 0xd800 [0xd81f].
Bus 0, device 7, function 4:
Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 64).
IRQ 9.
Bus 0, device 10, function 0:
VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 1).
IRQ 19.
Non-prefetchable 32 bit memory at 0xd4000000 [0xd5ffffff].
Prefetchable 32 bit memory at 0xd6000000 [0xd7ffffff].
I/O at 0xdc00 [0xdcff].
Bus 0, device 11, function 0:
Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 8).
IRQ 16.
Master Capable. Latency2. Min Gnt=2.Max Lat .
I/O at 0xe000 [0xe01f].
Bus 0, device 11, function 1:
Input device controller: Creative Labs SB Live! (rev 8).
Master Capable. Latency2.
I/O at 0xe400 [0xe407].
Bus 0, device 12, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 16).
IRQ 17.
Master Capable. Latency2. Min Gnt2.Max Latd.
I/O at 0xe800 [0xe8ff].
Non-prefetchable 32 bit memory at 0xd9000000 [0xd90000ff].
[Attachment #11 (application/pgp-signature)]
-
To unsubscribe from this list: send the line "unsubscribe linux-smp" in
the body of a message to majordomo@vger.kernel.org
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic