[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-smp
Subject: WARNING: unexpected IO-APIC
From: Erwin Lemmers <elem () kabelfoon ! nl>
Date: 2000-11-17 15:14:06
[Download RAW message or body]
Attached the ouput of dmesg.
Cheers, Erwin
["kernel.txt" (text/plain)]
Linux version 2.4.0-test11 (root@sys4.pe1nmb.ampr.org) (gcc version egcs-2.91.66 \
19990314/Linux (egcs-1.1.2 release)) #1 SMP Wed Nov 15 01:47:53 CET 2000 \
BIOS-provided physical RAM map: BIOS-e820: 000000000009d400 @ 0000000000000000 \
(usable) BIOS-e820: 0000000000002c00 @ 000000000009d400 (reserved)
BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved)
BIOS-e820: 0000000007efc000 @ 0000000000100000 (usable)
BIOS-e820: 0000000000003000 @ 0000000007ffc000 (ACPI data)
BIOS-e820: 0000000000001000 @ 0000000007fff000 (ACPI NVS)
BIOS-e820: 0000000000001000 @ 00000000fec00000 (reserved)
BIOS-e820: 0000000000001000 @ 00000000fee00000 (reserved)
BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved)
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at 000f4820
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
On node 0 totalpages: 32764
zone(0): 4096 pages.
zone(1): 28668 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
Bootup CPU
Processor #0 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
Bus #0 is PCI
Bus #1 is PCI
Bus #2 is PCI
Bus #3 is ISA
I/O APIC #2 Version 17 at 0xFEC00000.
Int: type 3, pol 0, trig 0, bus 3, IRQ 00, APIC ID 2, APIC INT 00
Int: type 0, pol 0, trig 0, bus 3, IRQ 01, APIC ID 2, APIC INT 01
Int: type 0, pol 0, trig 0, bus 3, IRQ 00, APIC ID 2, APIC INT 02
Int: type 0, pol 0, trig 0, bus 3, IRQ 03, APIC ID 2, APIC INT 03
Int: type 0, pol 0, trig 0, bus 3, IRQ 04, APIC ID 2, APIC INT 04
Int: type 0, pol 0, trig 0, bus 3, IRQ 06, APIC ID 2, APIC INT 06
Int: type 0, pol 0, trig 0, bus 3, IRQ 07, APIC ID 2, APIC INT 07
Int: type 0, pol 0, trig 0, bus 3, IRQ 08, APIC ID 2, APIC INT 08
Int: type 0, pol 0, trig 0, bus 3, IRQ 09, APIC ID 2, APIC INT 09
Int: type 0, pol 0, trig 0, bus 3, IRQ 0c, APIC ID 2, APIC INT 0c
Int: type 0, pol 0, trig 0, bus 3, IRQ 0e, APIC ID 2, APIC INT 0e
Int: type 0, pol 0, trig 0, bus 3, IRQ 0f, APIC ID 2, APIC INT 0f
Int: type 0, pol 3, trig 3, bus 3, IRQ 0b, APIC ID 2, APIC INT 10
Int: type 0, pol 3, trig 3, bus 3, IRQ 05, APIC ID 2, APIC INT 11
Int: type 0, pol 3, trig 3, bus 3, IRQ 0a, APIC ID 2, APIC INT 13
Lint: type 3, pol 1, trig 1, bus 3, IRQ 00, APIC ID ff, APIC LINT 00
Lint: type 1, pol 1, trig 1, bus 3, IRQ 00, APIC ID ff, APIC LINT 01
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Kernel command line: BOOT_IMAGE=Linux ro root=301 idebus=66 maxcpus=2
ide_setup: idebus=66
Initializing CPU#0
Detected 602.574 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1202.59 BogoMIPS
Memory: 126540k/131056k available (1349k kernel code, 4120k reserved, 79k data, 200k \
init, 0k highmem) Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel Pentium III (Coppermine) stepping 01
per-CPU timeslice cutoff: 731.56 usecs.
Getting VERSION: 40011
Getting VERSION: 40011
Getting ID: 1000000
Getting ID: e000000
Getting LVT0: 8700
Getting LVT1: 400
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
CPU present map: 3
Booting processor 1/0 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Waiting for send to finish...
+Deasserting INIT.
Waiting for send to finish...
+#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Startup point 1.
Waiting for send to finish...
+Initializing CPU#1
CPU#1 (phys ID: 0) waiting for CALLOUT
Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 1.
After Callout 1.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1202.59 BogoMIPS
Stack at about c7ff1fbc
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
Intel machine check reporting enabled on CPU#1.
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
OK.
CPU1: Intel Pentium III (Coppermine) stepping 01
CPU has booted.
Before bogomips.
Total of 2 processors activated (2405.17 BogoMIPS).
Before bogocount - setting activated=1.
Boot done.
ENABLING IO-APIC IRQs
...changing IO-APIC physical APIC ID to 2 ... ok.
Synchronizing Arb IDs.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-13, 2-18, 2-20, 2-21, 2-22, 2-23 not \
connected.
..TIMER: vector=49 pin1=2 pin2=0
activating NMI Watchdog ... done.
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00170020
....... : max redirection entries: 0017
....... : IO APIC version: 0020
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 003 03 0 0 0 0 0 1 1 51
07 003 03 0 0 0 0 0 1 1 59
08 003 03 0 0 0 0 0 1 1 61
09 003 03 0 0 0 0 0 1 1 69
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 003 03 0 0 0 0 0 1 1 71
0d 000 00 1 0 0 0 0 0 0 00
0e 003 03 0 0 0 0 0 1 1 79
0f 003 03 0 0 0 0 0 1 1 81
10 003 03 1 1 0 1 0 1 1 89
11 003 03 1 1 0 1 0 1 1 91
12 000 00 1 0 0 0 0 0 0 00
13 003 03 1 1 0 1 0 1 1 99
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 17
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 19
IRQ11 -> 16
IRQ12 -> 12
IRQ14 -> 14
IRQ15 -> 15
.................................... done.
calibrating APIC timer ...
..... CPU clock speed is 602.5682 MHz.
..... host bus clock speed is 133.9040 MHz.
cpu: 0, clocks: 1339040, slice: 446346
CPU0<T0:1339040,T1:892688,D:6,S:446346,C:1339040>
cpu: 1, clocks: 1339040, slice: 446346
CPU1<T0:1339040,T1:446336,D:12,S:446346,C:1339040>
checking TSC synchronization across CPUs: passed.
Setting commenced=1, go go go
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xf0770, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router PIIX [8086/122e] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
P6 Microcode Update Driver v1.07
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 66MHz system bus speed for PIO modes
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 2
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x9800-0x9807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x9808-0x980f, BIOS settings: hdc:DMA, hdd:pio
PDC20262: IDE controller on PCI bus 02 dev 48
PDC20262: chipset revision 1
PDC20262: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xb000-0xb007, BIOS settings: hde:pio, hdf:pio
hda: IBM-DTLA-307045, ATA DISK drive
hdc: ASUS CD-S500/A, ATAPI CDROM drive
hde: IBM-DPTA-372050, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xd400-0xd407,0xd002 on irq 5
hda: 90069840 sectors (46116 MB) w/1916KiB Cache, CHS=5606/255/63, UDMA(33)
hde: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=39770/16/63
hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.11
Partition check:
hda: hda1 hda2 hda3 hda4
hde: [PTBL] [2495/255/63] hde1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10d
i810_rng hardware driver 0.9.2 loaded
3c59x.c:LK1.1.11 13 Nov 2000 Donald Becker and others. \
http://www.scyld.com/network/vortex.html $Revision: 1.102.2.46 $ See \
Documentation/networking/vortex.txt
eth0: 3Com PCI 3c905B Cyclone 100baseTx at 0xd800, 00:10:5a:17:25:83, IRQ 11
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 786d.
MII transceiver found at address 0, status 786d.
Enabling bus-master transmits and whole-frame receives.
Creative EMU10K1 PCI Audio Driver, version 0.7, 01:49:06 Nov 15 2000
emu10k1: EMU10K1 rev 7 model 0x8040 found, IO at 0xa800-0xa81f, IRQ 10
AX.25: bpqether driver version 0.01
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: G4KLX/GW4PTS AX.25 for Linux. Version 0.37 for Linux NET4.0
kmem_create: Forcing size word alignment - nfs_fh
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 200k freed
Adding Swap: 1028152k swap-space (priority -1)
eth0: using NWAY autonegotiation
xastir uses obsolete (PF_INET,SOCK_PACKET)
-
To unsubscribe from this list: send the line "unsubscribe linux-smp" in
the body of a message to majordomo@vger.kernel.org
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic