[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-smp
Subject: unexpected ip-apic
From: Philip Dodd <philip.dodd () free ! fr>
Date: 2000-08-12 14:09:00
[Download RAW message or body]
running an asus p3c-d dual coppermine board,
enclosed attachment of /var/log/boot.msg, hope it is of use to you. no
particular stability issues on my setup, though.
["boot.msg" (text/plain)]
Inspecting /boot/System.map
Loaded 6224 symbols from /boot/System.map.
Symbols match kernel version 2.2.15.
Loaded 10 symbols from 2 modules.
klogd 1.3-3, log source = ksyslog started.
<4>Linux version 2.2.15 (root@gandalf) (gcc version egcs-2.91.66 19990314/Linux \
(egcs-1.1.2 release)) #4 SMP Mon Jun 19 10:27:00 CEST 2000 <4>Scan SMP from c0000000 \
for 1024 bytes. <4>Scan SMP from c009fc00 for 1024 bytes.
<4>Scan SMP from c00f0000 for 65536 bytes.
<4>Intel MultiProcessor Specification v1.4
<4> Virtual Wire compatibility mode.
<4>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
<4>Processor #1 Pentium(tm) Pro APIC version 17
<4> Floating point unit present.
<4> Machine Exception supported.
<4> 64 bit compare & exchange supported.
<4> Internal APIC present.
<4> Bootup CPU
<4>Processor #0 Pentium(tm) Pro APIC version 17
<4> Floating point unit present.
<4> Machine Exception supported.
<4> 64 bit compare & exchange supported.
<4> Internal APIC present.
<4>Bus #0 is PCI
<4>Bus #1 is PCI
<4>Bus #2 is PCI
<4>Bus #3 is ISA
<4>I/O APIC #2 Version 17 at 0xFEC00000.
<4>Processors: 2
<4>mapped APIC to ffffe000 (fee00000)
<4>mapped IOAPIC to ffffd000 (fec00000)
<4>Detected 602567066 Hz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 1202.59 BogoMIPS
<4>Memory: 257916k/262080k available (860k kernel code, 420k reserved, 2832k data, \
52k init) <4>Dentry hash table entries: 32768 (order 6, 256k)
<4>Buffer cache hash table entries: 262144 (order 8, 1024k)
<4>Page cache hash table entries: 65536 (order 6, 256k)
<6>Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
<4>per-CPU timeslice cutoff: 50.04 usecs.
<4>CPU1: Intel Pentium III (Coppermine) stepping 03
<4>Getting VERSION: 40011
<4>Getting VERSION: 40011
<4>Getting LVT0: 8700
<4>Getting LVT1: 400
<4>setup_APIC_clock() called.
<4>calibrating APIC timer ...
<4>..... 6025595 CPU clocks in 1 timer chip tick.
<4>..... 1339019 APIC bus clocks in 1 timer chip tick.
<4>..... CPU clock speed is 602.5595 MHz.
<4>..... system bus clock speed is 133.9019 MHz.
<4>CPU map: 3
<4>Booting processor 0 eip 2000
<4>Setting warm reset code and vector.
<4>1.
<4>2.
<4>3.
<4>Asserting INIT.
<4>Deasserting INIT.
<4>Sending STARTUP #1.
<4>After apic_write.
<4>Before start apic_write.
<4>Startup point 1.
<4>Waiting for send to finish...
<4>+CPU#0 waiting for CALLOUT
<4>Sending STARTUP #2.
<4>After apic_write.
<4>Before start apic_write.
<4>Startup point 1.
<4>Waiting for send to finish...
<4>+After Startup.
<4>Before Callout 0.
<4>After Callout 0.
<4>CALLIN, before enable_local_APIC().
<4>setup_APIC_clock() called.
<4>waiting for other CPU calibrating APIC ... done, continuing.
<4>Calibrating delay loop... 1202.59 BogoMIPS
<4>Stack at about cffebfbc
<4>OK.
<4>CPU0: Intel Pentium III (Coppermine) stepping 03
<4>CPU has booted.
<4>Before bogomips.
<6>Total of 2 processors activated (2405.17 BogoMIPS).
<4>Before bogocount - setting activated=1.
<4>Boot done.
<4>enabling symmetric IO mode... ...done.
<4>ENABLING IO-APIC IRQs
<4>init IO_APIC IRQs
<4> IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-13, 2-18, 2-20, 2-21, 2-22, 2-23 not \
connected. <4>number of MP IRQ sources: 16.
<4>number of IO-APIC #2 registers: 24.
<4>testing the IO APIC.......................
<4>
<4>IO APIC #2......
<4>.... register #00: 02000000
<4>....... : physical APIC id: 02
<4>.... register #01: 00170020
<4>....... : max redirection entries: 0017
<4>....... : IO APIC version: 0020
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.rutgers.edu
<4>.... register #02: 00000000
<4>....... : arbitration: 00
<4>.... IRQ redirection table:
<4> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<4> 00 000 00 1 0 0 0 0 0 0 00
<4> 01 000 00 0 0 0 0 0 1 1 59
<4> 02 0FF 0F 0 0 0 0 0 1 1 51
<4> 03 000 00 0 0 0 0 0 1 1 61
<4> 04 000 00 0 0 0 0 0 1 1 69
<4> 05 000 00 1 0 0 0 0 0 0 00
<4> 06 000 00 0 0 0 0 0 1 1 71
<4> 07 000 00 0 0 0 0 0 1 1 79
<4> 08 000 00 0 0 0 0 0 1 1 81
<4> 09 000 00 0 0 0 0 0 1 1 89
<4> 0a 000 00 1 0 0 0 0 0 0 00
<4> 0b 000 00 1 0 0 0 0 0 0 00
<4> 0c 000 00 0 0 0 0 0 1 1 91
<4> 0d 000 00 1 0 0 0 0 0 0 00
<4> 0e 000 00 0 0 0 0 0 1 1 99
<4> 0f 000 00 0 0 0 0 0 1 1 A1
<4> 10 0FF 0F 1 1 0 1 0 1 1 A9
<4> 11 0FF 0F 1 1 0 1 0 1 1 B1
<4> 12 000 00 1 0 0 0 0 0 0 00
<4> 13 0FF 0F 1 1 0 1 0 1 1 B9
<4> 14 000 00 1 0 0 0 0 0 0 00
<4> 15 000 00 1 0 0 0 0 0 0 00
<4> 16 000 00 1 0 0 0 0 0 0 00
<4> 17 000 00 1 0 0 0 0 0 0 00
<7>IRQ to pin mappings:
<7>IRQ0 -> 2
<7>IRQ1 -> 1
<7>IRQ3 -> 3
<7>IRQ4 -> 4
<7>IRQ6 -> 6
<7>IRQ7 -> 7
<7>IRQ8 -> 8
<7>IRQ9 -> 9
<7>IRQ12 -> 12
<7>IRQ14 -> 14
<7>IRQ15 -> 15
<7>IRQ16 -> 16
<7>IRQ17 -> 17
<7>IRQ19 -> 19
<4>.................................... done.
<4>checking TSC synchronization across CPUs: passed.
<4>Setting commenced=1, go go go
<4>PCI: PCI BIOS revision 2.10 entry at 0xf0770
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<4>PCI->APIC IRQ transform: (B0,I31,P3) -> 19
<4>PCI->APIC IRQ transform: (B0,I31,P1) -> 17
<4>PCI->APIC IRQ transform: (B1,I0,P0) -> 16
<4>PCI->APIC IRQ transform: (B2,I9,P0) -> 17
<6>Linux NET4.0 for Linux 2.2
<6>Based upon Swansea University Computer Society NET3.039
<6>NET4: Unix domain sockets 1.0 for Linux NET4.0.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP
<4>TCP: Hash tables configured (ehash 262144 bhash 65536)
<4>Starting kswapd v 1.5
<6>Detected PS/2 Mouse Port.
<6>Serial driver version 4.27 with MANY_PORTS SHARE_IRQ enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<4>pty: 256 Unix98 ptys configured
<6>Uniform Multi-Platform E-IDE driver Revision: 6.30
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>PIIX4: IDE controller on PCI bus 00 dev f9
<4>PIIX4: not 100% native mode: will probe irqs later
<4> ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
<4> ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA
<4>hda: ST320430A, ATA DISK drive
<4>hdc: PCCD048, ATAPI CDROM drive
<4>hdd: RICOH CD-R/RW MP7060A, ATAPI CDROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hda: ST320430A, 19569MB w/512kB Cache, CHS=2494/255/63, UDMA(66)
<4>hdc: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33)
<6>Uniform CDROM driver Revision: 2.56
<4>hdd: ATAPI 24X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a National Semiconductor PC87306
<6>PPP: version 2.3.7 (demand dialling)
<6>TCP compression code copyright 1989 Regents of the University of California
<6>PPP line discipline registered.
<4>Partition check:
<4> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
<4>VFS: Mounted root (ext2 filesystem) readonly.
<4>Freeing unused kernel memory: 52k freed
<6>Adding Swap: 136544k swap-space (priority -1)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/dmentre/smp-howto/
To Unsubscribe: send "unsubscribe linux-smp" to majordomo@vger.rutgers.edu
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic