[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-smp
Subject: Linux Advanced Server Kernel Issue
From: "Pieart.Larry" <pieart.larry () palmcoastd ! com>
Date: 2002-10-21 21:57:50
[Download RAW message or body]
Hi,
I have an IBM x440 server that we have been setting up with Red Hat Advanced
Server 2.1 using the Summit Kernel (2.4.9-e.8summit). In scanning through
the /var/log/dmesg file, I noticed a couple warnings that requested us to
email the information to you. The attached file is the complete dmesg file.
Sorry if you've already received enough of these.
Please let me know if you need any further information. Also, note that
these same messages occur using the Enterprise Kernel (didn't check smp or
non-smp) and if Hyper-Threading is enabled or not.
The system has 4 XEON 1.4GHz processors and 6GB of ECC memory with the
following PCI adapters:
Slot 1: empty
Slot 2: IBM Fibre Gigabit Ethernet Adapter
Slot 3: Q Logic Fibre Host Bus Adapter
Slot 4: Q Logic Fibre Host Bus Adapter
Slot 5: IBM ServeRAID 4LX Controller
Slot 6: empty
I would appreciate it if you could please let me know if this is an issue
that I need to be concerned with. I have two of these servers and have not
put either into production yet. If this message indicates a problem that I
should wait for a fix on, I would prefer to do it now rather than get them
into production and find out I've got a problem to deal with later.
Thanks,
Larry D. Pieart
Director of Corporate Technology
Palm Coast Data LLC
11 Commerce Blvd
Palm Coast, FL 32164
(386) 447-2361
(386) 447-2464 (Fax)
<<dmesg.txt>>
["dmesg.txt" (text/plain)]
Linux version 2.4.9-e.8summit (bhcompile@daffy.perf.redhat.com) (gcc version 2.96 \
20000731 (Red Hat Linux 7.2 2.96-108.1)) #1 SMP Fri Jul 19 15:17:42 EDT 2002 \
BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c800 \
(usable) BIOS-e820: 000000000009c800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dffb7000 (usable)
BIOS-e820: 00000000dffb7000 - 00000000dffbf800 (ACPI data)
BIOS-e820: 00000000dffbf800 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 00000001a0000000 (usable)
Scanning bios EBDA for MXT signature
5760MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 0009c940
hm, page 0009c000 reserved twice.
hm, page 0009d000 reserved twice.
hm, page 0009d000 reserved twice.
hm, page 0009e000 reserved twice.
WARNING: MP table in the EBDA can be UNSAFE, contact linux-smp@vger.kernel.org if you \
experience SMP problems! On node 0 totalpages: 1703936
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 1474560 pages.
ACPI: Searched entire block, no RSDP was found.
ACPI: RSDP located at physical address c00fdba0
RSD PTR v0 [IBM ]
ACPI table found: RSDT v1 [IBM SERVIGIL 0.4096]
init.c:122: bad pte c0004ef0(00000000dffbf163).
init.c:122: bad pte c0004ef0(00000000dffbf163).
ACPI table found: FACP v1 [IBM SERVIGIL 0.4096]
init.c:122: bad pte c0004ef0(00000000dffbf163).
init.c:122: bad pte c0004ef0(00000000dffbf163).
ACPI table found: APIC v1 [IBM SERVIGIL 0.4096]
init.c:122: bad pte c0004ef0(00000000dffbf163).
LAPIC (acpi_id[0x0000] id[0x0] enabled[1])
CPU 0 (0x0000) enabledProcessor #0 Unknown CPU [15:1] APIC version 16
LAPIC (acpi_id[0x0001] id[0x2] enabled[1])
CPU 1 (0x0200) enabledProcessor #2 Unknown CPU [15:1] APIC version 16
LAPIC (acpi_id[0x0002] id[0x10] enabled[1])
CPU 2 (0x1000) enabledProcessor #16 Unknown CPU [15:1] APIC version 16
LAPIC (acpi_id[0x0003] id[0x12] enabled[1])
CPU 3 (0x1200) enabledProcessor #18 Unknown CPU [15:1] APIC version 16
LAPIC (acpi_id[0x0004] id[0x1] enabled[1])
CPU 4 (0x0100) enabledProcessor #1 Unknown CPU [15:1] APIC version 16
LAPIC (acpi_id[0x0005] id[0x3] enabled[1])
CPU 5 (0x0300) enabledProcessor #3 Unknown CPU [15:1] APIC version 16
LAPIC (acpi_id[0x0006] id[0x11] enabled[1])
CPU 6 (0x1100) enabledProcessor #17 Unknown CPU [15:1] APIC version 16
LAPIC (acpi_id[0x0007] id[0x13] enabled[1])
CPU 7 (0x1300) enabledProcessor #19 Unknown CPU [15:1] APIC version 16
IOAPIC (id[0xe] address[0xfec00000] global_irq_base[0x0])
IOAPIC (id[0xd] address[0xfec01000] global_irq_base[0x33])
INT_SRC_OVR (bus[0] irq[0x8] global_irq[0x8] polarity[0x3] trigger[0x1])
INT_SRC_OVR (bus[0] irq[0xe] global_irq[0xe] polarity[0x1] trigger[0x0])
INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x24] polarity[0x0] trigger[0x0])
LAPIC_NMI (acpi_id[0x0000] polarity[0x0] trigger[0x0] lint[0x1])
LAPIC_NMI (acpi_id[0x0001] polarity[0x0] trigger[0x0] lint[0x1])
LAPIC_NMI (acpi_id[0x0002] polarity[0x0] trigger[0x0] lint[0x1])
LAPIC_NMI (acpi_id[0x0003] polarity[0x0] trigger[0x0] lint[0x1])
LAPIC_NMI (acpi_id[0x0004] polarity[0x0] trigger[0x0] lint[0x1])
LAPIC_NMI (acpi_id[0x0005] polarity[0x0] trigger[0x0] lint[0x1])
LAPIC_NMI (acpi_id[0x0006] polarity[0x0] trigger[0x0] lint[0x1])
LAPIC_NMI (acpi_id[0x0007] polarity[0x0] trigger[0x0] lint[0x1])
8 CPUs total
Local APIC address fee00000
init.c:122: bad pte c0004ef0(00000000dffbf163).
init.c:122: bad pte c0004ef0(00000000dffbf163).
ACPI table found: SRAT v1 [IBM SERVIGIL 0.4096]
Enabling the CPU's according to the ACPI table
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: IBM ENSW Product ID: VIGIL SMP APIC at: 0xFEE00000
I/O APIC #14 Version 17 at 0xFEC00000.
I/O APIC #13 Version 17 at 0xFEC01000.
Enabling APIC mode: Physical. Using 2 I/O APICs
Processors: 8
Kernel command line: ro root=/dev/sda3
Initializing CPU#0
Detected 1397.228 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2785.28 BogoMIPS
Memory: 6165336k/6815744k available (1980k kernel code, 117236k reserved, 131k data, \
248k init, 5373660k highmem) Dentry-cache hash table entries: 524288 (order: 10, \
4194304 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Buffer-cache hash table entries: 524288 (order: 9, 2097152 bytes)
Page-cache hash table entries: 524288 (order: 10, 4194304 bytes)
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
IBM machine detected. Enabling interrupts during APM calls.
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU0: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
per-CPU timeslice cutoff: 731.28 usecs.
task migration cache decay timeout: 10 msecs.
enabled ExtINT on CPU#0
Leaving ESR disabled.
Booting processor 1/2 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
Leaving ESR disabled.
Calibrating delay loop... 2791.83 BogoMIPS
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 1
Intel machine check reporting enabled on CPU#1.
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU1: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Booting processor 2/16 eip 2000
Initializing CPU#2
masked ExtINT on CPU#2
Leaving ESR disabled.
Calibrating delay loop... 2791.83 BogoMIPS
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 2
Intel machine check reporting enabled on CPU#2.
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU2: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Booting processor 3/18 eip 2000
Initializing CPU#3
masked ExtINT on CPU#3
Leaving ESR disabled.
Calibrating delay loop... 2791.83 BogoMIPS
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 3
Intel machine check reporting enabled on CPU#3.
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU3: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Booting processor 4/1 eip 2000
Initializing CPU#4
masked ExtINT on CPU#4
Leaving ESR disabled.
Calibrating delay loop... 2791.83 BogoMIPS
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 0
Intel machine check reporting enabled on CPU#4.
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU4: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Booting processor 5/3 eip 2000
Initializing CPU#5
masked ExtINT on CPU#5
Leaving ESR disabled.
Calibrating delay loop... 2791.83 BogoMIPS
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 1
Intel machine check reporting enabled on CPU#5.
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU5: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Booting processor 6/17 eip 2000
Initializing CPU#6
masked ExtINT on CPU#6
Leaving ESR disabled.
Calibrating delay loop... 2791.83 BogoMIPS
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 2
Intel machine check reporting enabled on CPU#6.
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU6: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Booting processor 7/19 eip 2000
Initializing CPU#7
masked ExtINT on CPU#7
Leaving ESR disabled.
Calibrating delay loop... 2791.83 BogoMIPS
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: L3 cache: 512K
CPU: Physical Processor ID: 3
Intel machine check reporting enabled on CPU#7.
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU7: Intel(R) Xeon(TM) CPU 1.40GHz stepping 01
Total of 8 processors activated (22328.11 BogoMIPS).
cpu_sibling_map[0] = 4
cpu_sibling_map[1] = 5
cpu_sibling_map[2] = 6
cpu_sibling_map[3] = 7
cpu_sibling_map[4] = 0
cpu_sibling_map[5] = 1
cpu_sibling_map[6] = 2
cpu_sibling_map[7] = 3
ENABLING IO-APIC IRQs
Setting 14 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 14 ... ok.
Setting 13 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 13 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 14-2, 14-3, 14-4, 14-5, 14-7, 14-9, 14-10, 14-11, 14-15, 14-17, \
14-20, 14-21, 14-22, 14-23, 14-24, 14-25, 14-26, 14-27, 14-28, 14-29, 14-30, 14-31, \
14-32, 14-33, 14-34, 14-35, 14-36, 14-37, 14-38, 14-40, 14-41, 14-42, 14-43, 14-44, \
14-45, 14-46, 14-47, 14-48, 14-49, 14-50, 13-24, 13-25, 13-26, 13-27, 13-28, 13-29, \
13-30, 13-31, 13-32, 13-33, 13-34, 13-35, 13-36, 13-37, 13-38, 13-39, 13-40, 13-41, \
13-42, 13-43, 13-44, 13-45, 13-46, 13-47, 13-48, 13-49, 13-50 not \
connected.
..TIMER: vector=0x31 pin1=0 pin2=-1
number of MP IRQ sources: 35.
number of IO-APIC #14 registers: 51.
number of IO-APIC #13 registers: 51.
testing the IO APIC.......................
IO APIC #14......
.... register #00: 0E000000
....... : physical APIC id: 0E
.... register #01: 00320011
....... : max redirection entries: 0032
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 011 01 0 0 0 0 0 0 0 31
01 002 02 0 0 0 0 0 0 0 39
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 0 0 0 0 0 0 0 41
07 000 00 1 0 0 0 0 0 0 00
08 000 00 0 0 0 1 0 0 0 49
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 0 0 51
0d 003 03 0 0 0 0 0 0 0 59
0e 011 01 0 0 0 0 0 0 0 61
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 1 0 1 0 0 0 69
11 000 00 1 0 0 0 0 0 0 00
12 010 00 1 1 0 1 0 0 0 71
13 012 02 1 1 0 1 0 0 0 79
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
18 000 00 1 0 0 0 0 0 0 00
19 000 00 1 0 0 0 0 0 0 00
1a 000 00 1 0 0 0 0 0 0 00
1b 000 00 1 0 0 0 0 0 0 00
1c 000 00 1 0 0 0 0 0 0 00
1d 000 00 1 0 0 0 0 0 0 00
1e 000 00 1 0 0 0 0 0 0 00
1f 000 00 1 0 0 0 0 0 0 00
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
23 000 00 1 0 0 0 0 0 0 00
24 000 00 1 0 0 0 0 0 0 00
25 000 00 1 0 0 0 0 0 0 00
26 000 00 1 0 0 0 0 0 0 00
27 013 03 1 1 0 1 0 0 0 81
28 000 00 1 0 0 0 0 0 0 00
29 000 00 1 0 0 0 0 0 0 00
2a 000 00 1 0 0 0 0 0 0 00
2b 000 00 1 0 0 0 0 0 0 00
2c 000 00 1 0 0 0 0 0 0 00
2d 000 00 1 0 0 0 0 0 0 00
2e 000 00 1 0 0 0 0 0 0 00
2f 000 00 1 0 0 0 0 0 0 00
30 000 00 1 0 0 0 0 0 0 00
31 000 00 1 0 0 0 0 0 0 00
32 000 00 1 0 0 0 0 0 0 00
IO APIC #13......
.... register #00: 0D000000
....... : physical APIC id: 0D
.... register #01: 00320011
....... : max redirection entries: 0032
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 012 02 1 1 0 1 0 0 0 89
01 001 01 1 1 0 1 0 0 0 91
02 003 03 1 1 0 1 0 0 0 99
03 011 01 1 1 0 1 0 0 0 A1
04 013 03 1 1 0 1 0 0 0 A9
05 000 00 1 1 0 1 0 0 0 B1
06 002 02 1 1 0 1 0 0 0 B9
07 010 00 1 1 0 1 0 0 0 C1
08 012 02 1 1 0 1 0 0 0 C9
09 001 01 1 1 0 1 0 0 0 D1
0a 003 03 1 1 0 1 0 0 0 D9
0b 011 01 1 1 0 1 0 0 0 E1
0c 013 03 1 1 0 1 0 0 0 E9
0d 000 00 1 1 0 1 0 0 0 32
0e 002 02 1 1 0 1 0 0 0 3A
0f 010 00 1 1 0 1 0 0 0 42
10 012 02 1 1 0 1 0 0 0 4A
11 001 01 1 1 0 1 0 0 0 52
12 003 03 1 1 0 1 0 0 0 5A
13 011 01 1 1 0 1 0 0 0 62
14 013 03 1 1 0 1 0 0 0 6A
15 000 00 1 1 0 1 0 0 0 72
16 002 02 1 1 0 1 0 0 0 7A
17 010 00 1 1 0 1 0 0 0 82
18 000 00 1 0 0 0 0 0 0 00
19 000 00 1 0 0 0 0 0 0 00
1a 000 00 1 0 0 0 0 0 0 00
1b 000 00 1 0 0 0 0 0 0 00
1c 000 00 1 0 0 0 0 0 0 00
1d 000 00 1 0 0 0 0 0 0 00
1e 000 00 1 0 0 0 0 0 0 00
1f 000 00 1 0 0 0 0 0 0 00
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
23 000 00 1 0 0 0 0 0 0 00
24 000 00 1 0 0 0 0 0 0 00
25 000 00 1 0 0 0 0 0 0 00
26 000 00 1 0 0 0 0 0 0 00
27 000 00 1 0 0 0 0 0 0 00
28 000 00 1 0 0 0 0 0 0 00
29 000 00 1 0 0 0 0 0 0 00
2a 000 00 1 0 0 0 0 0 0 00
2b 000 00 1 0 0 0 0 0 0 00
2c 000 00 1 0 0 0 0 0 0 00
2d 000 00 1 0 0 0 0 0 0 00
2e 000 00 1 0 0 0 0 0 0 00
2f 000 00 1 0 0 0 0 0 0 00
30 000 00 1 0 0 0 0 0 0 00
31 000 00 1 0 0 0 0 0 0 00
32 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ6 -> 0:6
IRQ8 -> 0:8
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ16 -> 0:16
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ39 -> 0:39
IRQ51 -> 1:0
IRQ52 -> 1:1
IRQ53 -> 1:2
IRQ54 -> 1:3
IRQ55 -> 1:4
IRQ56 -> 1:5
IRQ57 -> 1:6
IRQ58 -> 1:7
IRQ59 -> 1:8
IRQ60 -> 1:9
IRQ61 -> 1:10
IRQ62 -> 1:11
IRQ63 -> 1:12
IRQ64 -> 1:13
IRQ65 -> 1:14
IRQ66 -> 1:15
IRQ67 -> 1:16
IRQ68 -> 1:17
IRQ69 -> 1:18
IRQ70 -> 1:19
IRQ71 -> 1:20
IRQ72 -> 1:21
IRQ73 -> 1:22
IRQ74 -> 1:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1397.2556 MHz.
..... host bus clock speed is 99.8036 MHz.
cpu: 0, clocks: 998036, slice: 110892
CPU0<T0:998032,T1:887120,D:20,S:110892,C:998036>
cpu: 5, clocks: 998036, slice: 110892
cpu: 4, clocks: 998036, slice: 110892
cpu: 1, clocks: 998036, slice: 110892
cpu: 6, clocks: 998036, slice: 110892
cpu: 2, clocks: 998036, slice: 110892
cpu: 7, clocks: 998036, slice: 110892
cpu: 3, clocks: 998036, slice: 110892
CPU1<T0:998032,T1:776224,D:24,S:110892,C:998036>
CPU2<T0:998032,T1:665344,D:12,S:110892,C:998036>
CPU3<T0:998032,T1:554448,D:16,S:110892,C:998036>
CPU4<T0:998032,T1:443568,D:4,S:110892,C:998036>
CPU5<T0:998032,T1:332672,D:8,S:110892,C:998036>
CPU6<T0:998032,T1:221776,D:12,S:110892,C:998036>
CPU7<T0:998032,T1:110896,D:0,S:110892,C:998036>
checking TSC synchronization across CPUs: passed.
PCI: PCI BIOS revision 2.10 entry at 0xfd30d, last bus=11
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Discovered peer bus 01
PCI: Discovered peer bus 02
PCI: Discovered peer bus 05
PCI: Discovered peer bus 07
PCI: Discovered peer bus 09
PCI->APIC IRQ transform: (B0,I3,P0) -> 39
PCI->APIC IRQ transform: (B0,I4,P0) -> 16
PCI->APIC IRQ transform: (B0,I5,P3) -> 18
PCI->APIC IRQ transform: (B0,I5,P3) -> 18
PCI->APIC IRQ transform: (B2,I2,P0) -> 55
PCI->APIC IRQ transform: (B7,I3,P0) -> 67
PCI->APIC IRQ transform: (B9,I1,P0) -> 59
PCI->APIC IRQ transform: (B9,I2,P0) -> 63
PCI: Enabling Via external APIC routing
PCI: Via IRQ fixup for 00:05.2, from 11 to 2
PCI: Via IRQ fixup for 00:05.3, from 11 to 2
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
mxt_scan_bios: enter
Starting kswapd v1.8
bigpage subsystem: allocated 0 bigpages (=0MB).
allocated 256 pages and 256 bhs reserved for the highmem bounces
VFS: Diskquotas version dquot_6.5.0 initialized
aio_setup: num_physpages = 425984
aio_setup: sizeof(struct page) = 68
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ \
SERIAL_PCI ISAPNP enabled Real Time Clock Driver v1.10e
block: queued sectors max/low 4098810kB/3967738kB, 8192 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 29
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:05.1
ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:pio, hdd:pio
hda: LG CD-ROM CRN-8245B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
pci_hotplug: PCI Hot Plug PCI Core version: 0.3
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 65536 buckets, 512Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 328k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
scsi0 : IBM PCI ServeRAID 4.80.26 <ServeRAID 4Lx>
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Processor ANSI SCSI revision: 02
Vendor: IBM Model: GNHv1 S2 Rev: 0
Type: Processor ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 71096320 512-byte hdwr sectors (36401 MB)
Partition check:
sda: sda1 sda2 sda3
qla2x00_set_info starts at address = f8834060
qla2x00: Found VID=1077 DID=2300 SSVID=1077 SSDID=9
scsi1: Found a QLA2300 @ bus 9, device 0x1, irq 59, iobase 0x4000
scsi(1): Allocated 4096 SRB(s)
scsi(1): Configure NVRAM parameters...
qla2x00: 64 Bit PCI Addressing Enabled
scsi(1): Verifying loaded RISC code...
scsi(1): Verifying chip...
scsi(1): LIP reset occurred
scsi(1): Waiting for LIP to complete...
scsi(1): LOOP UP detected
scsi1: Topology - (F_Port), Host Loop address 0xffff
scsi1: Topology - (F_Port), Host Loop address 0xffff
qla020: ConfigRequired is set.
qla2x00: Found VID=1077 DID=2300 SSVID=1077 SSDID=9
scsi2: Found a QLA2300 @ bus 9, device 0x2, irq 63, iobase 0x4100
scsi(2): Allocated 4096 SRB(s)
scsi(2): Configure NVRAM parameters...
qla2x00: 64 Bit PCI Addressing Enabled
scsi(2): Verifying loaded RISC code...
scsi(2): Verifying chip...
scsi(2): LIP reset occurred
scsi(2): Waiting for LIP to complete...
scsi(2): LOOP UP detected
scsi2: Topology - (F_Port), Host Loop address 0xffff
scsi2: Topology - (F_Port), Host Loop address 0xffff
qla021: ConfigRequired is set.
scsi1 : QLogic QLA2300 PCI to Fibre Channel Host Adapter: bus 9 device 1 irq 59
Firmware version: 3.01.09, Driver version 6.0-fo
scsi2 : QLogic QLA2300 PCI to Fibre Channel Host Adapter: bus 9 device 2 irq 63
Firmware version: 3.01.09, Driver version 6.0-fo
Vendor: IBM Model: 1742 Rev: 0520
Type: Direct-Access ANSI SCSI revision: 03
Vendor: IBM Model: 1742 Rev: 0520
Type: Direct-Access ANSI SCSI revision: 03
Vendor: IBM Model: 1742 Rev: 0520
Type: Direct-Access ANSI SCSI revision: 03
Vendor: IBM Model: 1742 Rev: 0520
Type: Direct-Access ANSI SCSI revision: 03
scsi(1:0:0:0): Enabled tagged queuing, queue depth 16.
scsi(1:0:0:1): Enabled tagged queuing, queue depth 16.
scsi(1:0:0:2): Enabled tagged queuing, queue depth 16.
scsi(1:0:0:3): Enabled tagged queuing, queue depth 16.
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Attached scsi disk sdc at scsi1, channel 0, id 0, lun 1
Attached scsi disk sdd at scsi1, channel 0, id 0, lun 2
Attached scsi disk sde at scsi1, channel 0, id 0, lun 3
SCSI device sdb: 286583808 512-byte hdwr sectors (146731 MB)
sdb: unknown partition table
SCSI device sdc: 286583808 512-byte hdwr sectors (146731 MB)
sdc: unknown partition table
SCSI device sdd: 286583808 512-byte hdwr sectors (146731 MB)
sdd: unknown partition table
SCSI device sde: 573167616 512-byte hdwr sectors (293462 MB)
sde: unknown partition table
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 248k freed
Adding Swap: 2040244k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.259 $ time 15:23:55 Jul 19 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0x1880, IRQ 18
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0x18a0, IRQ 18
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.251:USB Universal Host Controller Interface driver
EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,3), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
-
To unsubscribe from this list: send the line "unsubscribe linux-smp" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic