[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-smp
Subject: WARNING: unexpected IO-APIC, please mail
From: "ISP dacomm GmbH" <info () dacomm ! de>
Date: 2002-06-29 12:58:55
[Download RAW message or body]
Hello to all,
i send you this boot.msg File.
My english isīt so good, so i send you
the report with no comments.
If you have a information for us
youcan mail it it english, we have a
person who can translate this.
Best regards
Michael Goldhoorn
dacomm GmbH
This you will find in the middle from the
Report...
------>
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<7>.... register #02: 00000000
<7>....... : arbitration: 00
<7>.... IRQ redirection table:
<------
Inspecting /boot/System.map-2.4.4-64GB-SMP
Loaded 11112 symbols from /boot/System.map-2.4.4-64GB-SMP.
Symbols match kernel version 2.4.4.
Loaded 5 symbols from 1 module.
klogd 1.3-3, log source = ksyslog started.
<4>Linux version 2.4.4-64GB-SMP (root@SMP_X86.suse.de) (gcc version 2.95.3
20010315 (SuSE)) #1 SMP Wed May 16 01:20:45 GMT 2001
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
<4> BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
<4> BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>127MB HIGHMEM available.
<4>Scan SMP from c0000000 for 1024 bytes.
<4>Scan SMP from c009fc00 for 1024 bytes.
<4>Scan SMP from c00f0000 for 65536 bytes.
<4>found SMP MP-table at 000f54d0
<4>hm, page 000f5000 reserved twice.
<4>hm, page 000f6000 reserved twice.
<4>hm, page 000f5000 reserved twice.
<4>hm, page 000f6000 reserved twice.
<4>On node 0 totalpages: 262140
<4>zone(0): 4096 pages.
<4>zone(1): 225280 pages.
<4>zone(2): 32764 pages.
<4>Intel MultiProcessor Specification v1.1
<4> Virtual Wire compatibility mode.
<4>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
<4>Processor #3 Pentium(tm) Pro APIC version 17
<4> Floating point unit present.
<4> Machine Exception supported.
<4> 64 bit compare & exchange supported.
<4> Internal APIC present.
<4> SEP present.
<4> MTRR present.
<4> PGE present.
<4> MCA present.
<4> CMOV present.
<4> PAT present.
<4> PSE present.
<4> MMX present.
<4> FXSR present.
<4> XMM present.
<4> Bootup CPU
<4>Processor #0 Pentium(tm) Pro APIC version 17
<4> Floating point unit present.
<4> Machine Exception supported.
<4> 64 bit compare & exchange supported.
<4> Internal APIC present.
<4> SEP present.
<4> MTRR present.
<4> PGE present.
<4> MCA present.
<4> CMOV present.
<4> PAT present.
<4> PSE present.
<4> MMX present.
<4> FXSR present.
<4> XMM present.
<4>Bus #0 is PCI
<4>Bus #1 is ISA
<4>I/O APIC #2 Version 17 at 0xFEC00000.
<4>Int: type 3, pol 0, trig 0, bus 1, IRQ 00, APIC ID 2, APIC INT 00
<4>Int: type 0, pol 0, trig 0, bus 1, IRQ 01, APIC ID 2, APIC INT 01
<4>Int: type 0, pol 0, trig 0, bus 1, IRQ 00, APIC ID 2, APIC INT 02
<4>Int: type 0, pol 0, trig 0, bus 1, IRQ 03, APIC ID 2, APIC INT 03
<4>Int: type 0, pol 0, trig 0, bus 1, IRQ 04, APIC ID 2, APIC INT 04
<4>Int: type 0, pol 0, trig 0, bus 1, IRQ 05, APIC ID 2, APIC INT 05
<4>Int: type 0, pol 0, trig 0, bus 1, IRQ 06, APIC ID 2, APIC INT 06
<4>Int: type 0, pol 0, trig 0, bus 1, IRQ 07, APIC ID 2, APIC INT 07
<4>Int: type 0, pol 0, trig 0, bus 1, IRQ 08, APIC ID 2, APIC INT 08
<4>Int: type 0, pol 0, trig 0, bus 1, IRQ 09, APIC ID 2, APIC INT 09
<4>Int: type 0, pol 0, trig 0, bus 1, IRQ 0c, APIC ID 2, APIC INT 0c
<4>Int: type 0, pol 0, trig 0, bus 1, IRQ 0e, APIC ID 2, APIC INT 0e
<4>Int: type 0, pol 0, trig 0, bus 1, IRQ 0f, APIC ID 2, APIC INT 0f
<4>Int: type 0, pol 3, trig 3, bus 1, IRQ 0b, APIC ID 2, APIC INT 0b
<4>Int: type 0, pol 3, trig 3, bus 1, IRQ 0a, APIC ID 2, APIC INT 0a
<4>Lint: type 3, pol 1, trig 1, bus 1, IRQ 00, APIC ID ff, APIC LINT 00
<4>Lint: type 1, pol 1, trig 1, bus 1, IRQ 00, APIC ID ff, APIC LINT 01
<4>Processors: 2
<4>mapped APIC to ffffe000 (fee00000)
<4>mapped IOAPIC to ffffd000 (fec00000)
<4>Kernel command line: auto BOOT_IMAGE=linux ro root=302
BOOT_FILE=/boot/vmlinuz
<6>Initializing CPU#0
<4>Detected 1004.542 MHz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 2005.40 BogoMIPS
<4>Memory: 1027452k/1048560k available (1320k kernel code, 20724k reserved,
950k data, 120k init, 131056k highmem)
<4>Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
<4>Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
<4>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
<5>VFS: Diskquotas version dquot_6.5.0 initialized
<7>CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<7>CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<4>CPU0: Intel Pentium III (Coppermine) stepping 0a
<4>per-CPU timeslice cutoff: 731.07 usecs.
<4>Getting VERSION: 40011
<4>Getting VERSION: 40011
<4>Getting ID: 3000000
<4>Getting ID: c000000
<4>Getting LVT0: 8700
<4>Getting LVT1: 400
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>CPU present map: 9
<4>Booting processor 1/0 eip 2000
<4>Setting warm reset code and vector.
<4>1.
<4>2.
<4>3.
<4>Asserting INIT.
<4>Waiting for send to finish...
<4>+Deasserting INIT.
<4>Waiting for send to finish...
<4>+#startup loops: 2.
<4>Sending STARTUP #1.
<4>After apic_write.
<6>Initializing CPU#1
<4>CPU#1 (phys ID: 0) waiting for CALLOUT
<4>Startup point 1.
<4>Waiting for send to finish...
<4>+Sending STARTUP #2.
<4>After apic_write.
<4>Startup point 1.
<4>Waiting for send to finish...
<4>+After Startup.
<4>Before Callout 1.
<4>After Callout 1.
<4>CALLIN, before setup_local_APIC().
<4>masked ExtINT on CPU#1
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Calibrating delay loop... 2005.40 BogoMIPS
<4>Stack at about c211dfbc
<7>CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<6>Intel machine check reporting enabled on CPU#1.
<7>CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<4>OK.
<4>CPU1: Intel Pentium III (Coppermine) stepping 0a
<4>CPU has booted.
<4>Before bogomips.
<6>Total of 2 processors activated (4010.80 BogoMIPS).
<4>Before bogocount - setting activated=1.
<4>Boot done.
<4>ENABLING IO-APIC IRQs
<6>...changing IO-APIC physical APIC ID to 2 ... ok.
<4>Synchronizing Arb IDs.
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-0, 2-13, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21,
2-22, 2-23 not connected.
<6>..TIMER: vector=49 pin1=2 pin2=0
<7>number of MP IRQ sources: 15.
<7>number of IO-APIC #2 registers: 24.
----->
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02000000
<7>....... : physical APIC id: 02
<7>.... register #01: 00178011
<7>....... : max redirection entries: 0017
<7>....... : IO APIC version: 0011
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<7>.... register #02: 00000000
<7>....... : arbitration: 00
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 000 00 1 0 0 0 0 0 0 00
<7> 01 003 03 0 0 0 0 0 1 1 39
<7> 02 003 03 0 0 0 0 0 1 1 31
<-------
<7> 03 003 03 0 0 0 0 0 1 1 41
<7> 04 003 03 0 0 0 0 0 1 1 49
<7> 05 003 03 0 0 0 0 0 1 1 51
<7> 06 003 03 0 0 0 0 0 1 1 59
<7> 07 003 03 0 0 0 0 0 1 1 61
<7> 08 003 03 0 0 0 0 0 1 1 69
<7> 09 003 03 0 0 0 0 0 1 1 71
<7> 0a 003 03 1 1 0 1 0 1 1 79
<7> 0b 003 03 1 1 0 1 0 1 1 81
<7> 0c 003 03 0 0 0 0 0 1 1 89
<7> 0d 000 00 1 0 0 0 0 0 0 00
<7> 0e 003 03 0 0 0 0 0 1 1 91
<7> 0f 003 03 0 0 0 0 0 1 1 99
<7> 10 000 00 1 0 0 0 0 0 0 00
<7> 11 000 00 1 0 0 0 0 0 0 00
<7> 12 000 00 1 0 0 0 0 0 0 00
<7> 13 000 00 1 0 0 0 0 0 0 00
<7> 14 000 00 1 0 0 0 0 0 0 00
<7> 15 000 00 1 0 0 0 0 0 0 00
<7> 16 000 00 1 0 0 0 0 0 0 00
<7> 17 000 00 1 0 0 0 0 0 0 00
<7>IRQ to pin mappings:
<7>IRQ0 -> 2
<7>IRQ1 -> 1
<7>IRQ3 -> 3
<7>IRQ4 -> 4
<7>IRQ5 -> 5
<7>IRQ6 -> 6
<7>IRQ7 -> 7
<7>IRQ8 -> 8
<7>IRQ9 -> 9
<7>IRQ10 -> 10
<7>IRQ11 -> 11
<7>IRQ12 -> 12
<7>IRQ14 -> 14
<7>IRQ15 -> 15
<6>.................................... done.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 1004.4323 MHz.
<4>..... host bus clock speed is 133.9241 MHz.
<4>cpu: 0, clocks: 1339241, slice: 446413
<4>CPU0<T0:1339232,T1:892816,D:3,S:446413,C:1339241>
<4>cpu: 1, clocks: 1339241, slice: 446413
<4>CPU1<T0:1339232,T1:446400,D:6,S:446413,C:1339241>
<4>checking TSC synchronization across CPUs: passed.
<4>Setting commenced=1, go go go
<4>PCI: PCI BIOS revision 2.10 entry at 0xf0d20, last bus=1
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<4>PCI: Disabled enhanced CPU to PCI posting
<4>PCI: Disabled enhanced CPU to PCI posting #2
<3>Unknown bridge resource 0: assuming transparent
<3>Unknown bridge resource 1: assuming transparent
<3>Unknown bridge resource 2: assuming transparent
<6>PCI: Using IRQ router VIA [1106/0686] at 00:04.0
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
<5>apm: disabled - APM is not SMP safe.
<4>Starting kswapd v1.8
<4>allocated 32 pages and 32 bhs reserved for the highmem bounces
<6>Detected PS/2 Mouse Port.
<4>pty: 256 Unix98 ptys configured
<4>block: queued sectors max/low 682837kB/551765kB, 2048 slots per queue
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
<4>VP_IDE: IDE controller on PCI bus 00 dev 21
<4>VP_IDE: chipset revision 6
<4>VP_IDE: not 100%% native mode: will probe irqs later
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
<6>VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:04.1
<4> ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
<4> ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
<4>keyboard: Timeout - AT keyboard not present?
<4>keyboard: Timeout - AT keyboard not present?
<4>hda: ASI ARAID99 500, ATA DISK drive
<4>hdb: no response (status = 0xa1), resetting drive
<4>hdb: no response (status = 0xa1)
<4>hdc: IC35L040AVER07-0, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hda: 120103200 sectors (61493 MB), CHS=7476/255/63
<6>hdc: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63
<6>Partition check:
<6> hda: hda1 hda2 hda3 hda4
<6> hdc: [PTBL] [5005/255/63] hdc1
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<5>RAMDISK: Compressed image found at block 0
<4>Uncompressing...................................done.
<4>Freeing initrd memory: 507k freed
<6>loop: loaded (max 8 devices)
<6>Serial driver version 5.05a (2001-03-20) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
<6>Real Time Clock Driver v1.10d
<6>SCSI subsystem driver Revision: 1.00
<3>request_module[scsi_hostadapter]: Root fs not mounted
<3>request_module[scsi_hostadapter]: Root fs not mounted
<6>Uniform CD-ROM driver Revision: 3.12
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>IP: routing cache hash table of 8192 buckets, 64Kbytes
<4>TCP: Hash tables configured (established 262144 bind 65536)
<6>Linux IP multicast router 0.06 plus PIM-SM
<3>IP-Config: No network devices available.
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<4>VFS: Mounted root (ext2 filesystem).
<4>fatfs: bogus cluster size
<4>fatfs: bogus cluster size
<4>reiserfs: checking transaction log (device 03:02) ...
<4>Warning, log replay starting on readonly filesystem
<4>reiserfs: replayed 63 transactions in 4 seconds
<4>Using r5 hash to sort names
<4>reiserfs: using 3.5.x disk format
<4>ReiserFS version 3.6.25
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<4>change_root: old root has d_count=3
<5>Trying to unmount old root ... okay
<4>Freeing unused kernel memory: 120k freed
<6>Adding Swap: 1405676k swap-space (priority 42)
<4>reiserfs: checking transaction log (device 03:03) ...
<4>Using r5 hash to sort names
<4>reiserfs: using 3.5.x disk format
<4>ReiserFS version 3.6.25
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started at Sat Jun 29 06:10:43 2002
Activating swap-devices in /etc/fstab...
doneChecking file systems...
Parallelizing fsck version 1.19a (13-Jul-2000)
<-------------reiserfsck, 2001------------->
reiserfsprogs 3.x.0j
/dev/hdc1: clean, 702566/5029888 files, 4828701/10050657 blocks
/dev/hda1: clean, 31/64256 files, 11618/257008 blocks
<-------------reiserfsck, 2001------------->
reiserfsprogs 3.x.0j
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hdc1 on /backup type ext2 (rw)
/dev/hda1 on /boot type ext2 (rw)
/dev/hda3 on /www type reiserfs (rw)
doneActivating remaining swap-devices in /etc/fstab...
doneSetting up the CMOS clockdone
Starting ldconfig (setting up /etc/ld.so.cache)done
Setting up timezone datadone
Setting up loopback devicedone
Setting up hostnamedone
Mount SHM FS on /dev/shmdone
Configuring serial ports...
Configured serial ports
doneRunning /etc/init.d/boot.local
doneCreating /var/log/boot.msg
doneEnabling syn flood protectiondone
Disabling IP forwardingdone
Boot logging started at Sat Jun 29 04:10:54 2002
Master Resource Control: previous runlevel: N, switching to runlevel: 3
/usr/local/apache/bin/apachectl start: httpd started
Starting personal-firewall (initial) [not active]unused
Initializing random number generatordone
Starting Webmin server in /usr/libexec/webmin
Setting up network device eth0
-
To unsubscribe from this list: send the line "unsubscribe linux-smp" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic